public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
* [U-Boot] [PATCH v2 0/4] sun8i: Remaining sun8i SPL support patches
@ 2014-12-20 11:29 Hans de Goede
  2014-12-20 11:29 ` [U-Boot] [PATCH v2 1/4] sun6i: s/SUNXI_*P2WI*/SUN6I_*P2WI*/ Hans de Goede
                   ` (4 more replies)
  0 siblings, 5 replies; 10+ messages in thread
From: Hans de Goede @ 2014-12-20 11:29 UTC (permalink / raw)
  To: u-boot

Hi Ian, et al,

Here is a v2 of the A23 patches which did not pass review in v1 (so not a
resend of the whole set).

Changes:
-"sun6i: s/SUNXI_*P2WI*/SUN6I_*P2WI*/"
 -Not only change the prefix of the P2WI gpio mux defines from SUNXI to
  SUN6I, but also the prefix of the SUN6I_P2WI_BASE address define
-"sunxi: Add support for the rsb (Reduced Serial Bus)"
 -Drop sun6i / sun8i comments from SUN6I_P2WI_BASE / SUNXI_RSB_BASE defines,
  use the prefix instead to make clear for which SoC family they are valid
-"sun8i: Add dram initialization support"
 -white space fixes
 -Add a comment that the ddr phy bits look a lot like the ddr phy found
  in the TI Keystone2 and add a link to the TI Keystone2 documentation for
  future reference / cleanup work 
 -Split out the Ippo_q8h_v5_defconfig patches into their own patch

Regards,

Hans

p.s.

I also still need an ack for "sunxi: Fill memory before comparing it when
doing dram init on sun6i", as you had some questions on that when reviewing
v1 of the set.

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2014-12-22 14:39 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-12-20 11:29 [U-Boot] [PATCH v2 0/4] sun8i: Remaining sun8i SPL support patches Hans de Goede
2014-12-20 11:29 ` [U-Boot] [PATCH v2 1/4] sun6i: s/SUNXI_*P2WI*/SUN6I_*P2WI*/ Hans de Goede
2014-12-20 11:29 ` [U-Boot] [PATCH v2 2/4] sunxi: Add support for the rsb (Reduced Serial Bus) Hans de Goede
2014-12-22 13:10   ` Ian Campbell
2014-12-20 11:29 ` [U-Boot] [PATCH v2 3/4] sun8i: Add dram initialization support Hans de Goede
2014-12-22 13:13   ` Ian Campbell
2014-12-20 11:29 ` [U-Boot] [PATCH v2 4/4] sun8i: Ippo_q8h_v5_defconfig: Enable SPL support Hans de Goede
2014-12-22 13:14   ` Ian Campbell
2014-12-22  9:35 ` [U-Boot] [PATCH v2 0/4] sun8i: Remaining sun8i SPL support patches Chen-Yu Tsai
2014-12-22 14:39   ` Siarhei Siamashka

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox