[U-Boot] [PATCH v1 0/4] Jetson-TK1 support for PSCI

[Ian Campbell <ijc@hellion.org.uk>]

Hi Thierry,

I needed to boot my Jetson in NS mode (in order to boot Xen) and was
investigating the possibility of PSCI support when I discovered that you
had already started on it[0]. Hurrah!

I cherry-picked the relevant commit onto u-boot-tegra#master and added a
few more patches and now it boots correctly for me, both running Xen
(some Xen side patches are needed too) and native Linux.

The main things which was needed was to rebase for some recent Kconfig
changes relating to virt and nonsec mode and to arrange for the RAM used
by the secure code to be reserved in the FDT. I also reserved the RAM
using the hardware MC_SECURITY_CFG registers for good measure.

I also pushed my tree to gitorious:
        https://gitorious.org/ijc/u-boot jetson-psci-v1

I would Ack your patch, but I don't think you've posted it and it has no
S-o-b so that would seem a bit premature/rude of me. For the same reason
I've not actually included it in the series posted (but it is in the
gitorious branch).

FWIW I think you could drop your stub versions of psci_cpu_off and
psci_cpu_suspend (assuming you don't want to implement them) since the
common code has stubs.

Albert, I've CCd you on a couple of patches which touch common ARM code.
Nothing too major I think.

Cheers,
Ian.

[0]
https://github.com/thierryreding/u-boot/commit/5996d2b0dea2953ae8881f40b7f85b6fb8c50791