From: "Andreas Bießmann" <andreas.devel@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v1 3/8] avr32: factor out cpu_mmc_init()
Date: Wed, 28 Jan 2015 01:16:01 +0100 [thread overview]
Message-ID: <1422404166-6898-4-git-send-email-andreas.devel@googlemail.com> (raw)
In-Reply-To: <1422404166-6898-1-git-send-email-andreas.devel@googlemail.com>
cpu_mmc_init() is required by the init sequence to have a working MMC interface
on avr32. This will not be included in the binary if we omit the avr32 board.c
when building the generic board.
Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>
---
Changes in v1:
- new since RFC
arch/avr32/cpu/Makefile | 1 +
arch/avr32/cpu/mmc.c | 16 ++++++++++++++++
arch/avr32/lib/board.c | 8 --------
3 files changed, 17 insertions(+), 8 deletions(-)
create mode 100644 arch/avr32/cpu/mmc.c
diff --git a/arch/avr32/cpu/Makefile b/arch/avr32/cpu/Makefile
index 00cede3..e111db3 100644
--- a/arch/avr32/cpu/Makefile
+++ b/arch/avr32/cpu/Makefile
@@ -16,5 +16,6 @@ obj-y += cache.o
obj-y += interrupts.o
obj-$(CONFIG_PORTMUX_PIO) += portmux-pio.o
obj-$(CONFIG_PORTMUX_GPIO) += portmux-gpio.o
+obj-y += mmc.o
obj-$(if $(filter at32ap700x,$(SOC)),y) += at32ap700x/
diff --git a/arch/avr32/cpu/mmc.c b/arch/avr32/cpu/mmc.c
new file mode 100644
index 0000000..b7213e4
--- /dev/null
+++ b/arch/avr32/cpu/mmc.c
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ * Copyright (C) 2015 Andreas Bie?mann <andreas.devel@googlmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <atmel_mci.h>
+#include <asm/arch/hardware.h>
+
+/* provide cpu_mmc_init, to overwrite provide board_mmc_init */
+int cpu_mmc_init(bd_t *bd)
+{
+ /* This calls the atmel_mci_init in gen_atmel_mci.c */
+ return atmel_mci_init((void *)ATMEL_BASE_MMCI);
+}
diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c
index 95f9526..e86530f 100644
--- a/arch/avr32/lib/board.c
+++ b/arch/avr32/lib/board.c
@@ -9,7 +9,6 @@
#include <stdio_dev.h>
#include <version.h>
#include <net.h>
-#include <atmel_mci.h>
#ifdef CONFIG_BITBANGMII
#include <miiphy.h>
@@ -38,13 +37,6 @@ static int __do_nothing(void)
int board_postclk_init(void) __attribute__((weak, alias("__do_nothing")));
int board_early_init_r(void) __attribute__((weak, alias("__do_nothing")));
-/* provide cpu_mmc_init, to overwrite provide board_mmc_init */
-int cpu_mmc_init(bd_t *bd)
-{
- /* This calls the atmel_mci_init in gen_atmel_mci.c */
- return atmel_mci_init((void *)ATMEL_BASE_MMCI);
-}
-
static int init_baudrate(void)
{
gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
--
1.7.10.4
next prev parent reply other threads:[~2015-01-28 0:16 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-28 0:15 [U-Boot] [PATCH v1 0/8] avr32: add generic board Andreas Bießmann
2015-01-28 0:15 ` [U-Boot] [PATCH v1 1/8] avr32: use dlmalloc for DMA buffers Andreas Bießmann
2015-01-28 0:16 ` [U-Boot] [PATCH v1 2/8] avr32: rename cpu_init() -> arch_cpu_init() Andreas Bießmann
2015-01-28 0:16 ` Andreas Bießmann [this message]
2015-01-28 0:16 ` [U-Boot] [PATCH v1 4/8] avr32: rename mmu.h definitions Andreas Bießmann
2015-01-28 0:16 ` [U-Boot] [PATCH v1 5/8] common/board_r: manual relocation for cmd table Andreas Bießmann
2015-01-28 0:16 ` [U-Boot] [PATCH v1 6/8] avr32: add generic board support Andreas Bießmann
2015-01-28 3:09 ` Simon Glass
2015-01-28 10:04 ` Andreas Bießmann
2015-01-28 16:34 ` Simon Glass
2015-01-28 0:16 ` [U-Boot] [PATCH v1 7/8] grasshopper: enable generic board Andreas Bießmann
2015-01-28 0:16 ` [U-Boot] [PATCH v1 8/8] atstk1002: " Andreas Bießmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422404166-6898-4-git-send-email-andreas.devel@googlemail.com \
--to=andreas.devel@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox