[U-Boot] [PATCH V2 8/9] configs: ti_omap3_common: Enable workaround for ARM errata 454179, 430973, 621766

[Paul Kocialkowski <contact@paulk.fr>]

Le mardi 24 f?vrier 2015 ? 16:57 -0600, Nishanth Menon a ?crit :
> Enable the OMAP3 specific errata code for 454179, 430973, 621766
> and while at it, remove legacy non-revision checked errata logic.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
>  arch/arm/cpu/armv7/omap3/board.c  |   16 ----------------
>  include/configs/ti_omap3_common.h |    6 ++++++
>  2 files changed, 6 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
> index 7ce30949a6c6..cc3a43341335 100644
> --- a/arch/arm/cpu/armv7/omap3/board.c
> +++ b/arch/arm/cpu/armv7/omap3/board.c
> @@ -35,7 +35,6 @@ DECLARE_GLOBAL_DATA_PTR;
>  
>  /* Declarations */
>  extern omap3_sysinfo sysinfo;
> -static void omap3_setup_aux_cr(void);
>  #ifndef CONFIG_SYS_L2CACHE_OFF
>  static void omap3_invalidate_l2_cache_secure(void);
>  #endif
> @@ -246,9 +245,6 @@ void s_init(void)
>  
>  	try_unlock_memory();
>  
> -	/* Errata workarounds */
> -	omap3_setup_aux_cr();
> -
>  #ifndef CONFIG_SYS_L2CACHE_OFF
>  	/* Invalidate L2-cache from secure mode */
>  	omap3_invalidate_l2_cache_secure();
> @@ -428,18 +424,6 @@ void omap3_update_aux_cr_secure(u32 set_bits, u32 clear_bits)
>  	}
>  }
>  
> -static void omap3_setup_aux_cr(void)
> -{
> -	/* Workaround for Cortex-A8 errata: #454179 #430973
> -	 *	Set "IBE" bit
> -	 *	Set "Disable Branch Size Mispredicts" bit
> -	 * Workaround for erratum #621766
> -	 *	Enable L1NEON bit
> -	 * ACR |= (IBE | DBSM | L1NEON) => ACR |= 0xE0
> -	 */
> -	omap3_update_aux_cr_secure(0xE0, 0);
> -}
> -
>  #ifndef CONFIG_SYS_L2CACHE_OFF
>  static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
>  {
> diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
> index f909f6b94a18..db15c12ddf53 100644
> --- a/include/configs/ti_omap3_common.h
> +++ b/include/configs/ti_omap3_common.h

Only a couple of OMAP3 boards in U-Boot include ti_omap3_common.h. You
can find a complete list of all the configs that need those options
enabled from my first patch on that topic:
http://lists.denx.de/pipermail/u-boot/2015-February/205809.html

I guess it's better to enable those on all the currently-supported omap3
platforms: that's the way it was so far and it won't hurt in cases it's
not needed thanks to the revision detection.

> @@ -27,6 +27,12 @@
>  # define CONFIG_SYS_MALLOC_F_LEN	(1 << 10)
>  #endif
>  
> +/* Common ARM Erratas */
> +#define CONFIG_ARM_ARCH_CP15_ERRATA
> +#define CONFIG_ARM_ERRATA_454179
> +#define CONFIG_ARM_ERRATA_430973
> +#define CONFIG_ARM_ERRATA_621766
> +
>  /* The chip has SDRC controller */
>  #define CONFIG_SDRC
>  

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150225/a5336e91/attachment.sig>