public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V6 02/11] ARM: Introduce erratum workaround for 454179
Date: Mon, 9 Mar 2015 17:12:00 -0500	[thread overview]
Message-ID: <1425939129-308-3-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1425939129-308-1-git-send-email-nm@ti.com>

454179: Stale prediction may inhibit target address misprediction on
	next predicted taken branch
Impacts: Every Cortex-A8 processors with revision lower than r2p1
Work around:  Set IBE and disable branch size mispredict to 1

Also provide a hook for SoC specific handling to take place if needed.

Based on ARM errata Document revision 20.0 (13 Nov 2010)

Signed-off-by: Nishanth Menon <nm@ti.com>
---
 README                       |    1 +
 arch/arm/cpu/armv7/cp15.c    |    6 ++++++
 arch/arm/cpu/armv7/start.S   |   13 +++++++++++++
 arch/arm/include/asm/armv7.h |    2 ++
 4 files changed, 22 insertions(+)

diff --git a/README b/README
index 9a0106066b1c..259dbdbd2075 100644
--- a/README
+++ b/README
@@ -693,6 +693,7 @@ The following options need to be configured:
 		NOTE: The following can be machine specific errata. These
 		do have ability to provide rudimentary version and machine
 		specific checks, but expect no product checks.
+		CONFIG_ARM_ERRATA_454179
 		CONFIG_ARM_ERRATA_798870
 
 - Driver Model
diff --git a/arch/arm/cpu/armv7/cp15.c b/arch/arm/cpu/armv7/cp15.c
index 8ac81c9ba147..b44c9f94a822 100644
--- a/arch/arm/cpu/armv7/cp15.c
+++ b/arch/arm/cpu/armv7/cp15.c
@@ -21,3 +21,9 @@ void __weak v7_arch_cp15_set_l2aux_ctrl(u32 l2actlr, u32 cpu_midr,
 {
 	asm volatile ("mcr p15, 1, %0, c15, c0, 0\n\t" : : "r"(l2actlr));
 }
+
+void __weak v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
+				 u32 cpu_variant, u32 cpu_rev)
+{
+	asm volatile ("mcr p15, 0, %0, c1, c0, 1\n\t" : : "r"(acr));
+}
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 89637e26395d..8483687879ed 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -189,6 +189,19 @@ ENTRY(cpu_init_cp15)
 skip_errata_798870:
 #endif
 
+#ifdef CONFIG_ARM_ERRATA_454179
+	cmp	r2, #0x21		@ Only on < r2p1
+	bge	skip_errata_454179
+
+	mrc	p15, 0, r0, c1, c0, 1	@ Read ACR
+	orr	r0, r0, #(0x3 << 6)	@ Set DBSM(BIT7) and IBE(BIT6) bits
+	push	{r1-r5}			@ Save the cpu info registers
+	bl	v7_arch_cp15_set_acr
+	pop	{r1-r5}			@ Restore the cpu info - fall through
+
+skip_errata_454179:
+#endif
+
 	mov	pc, r5			@ back to my caller
 ENDPROC(cpu_init_cp15)
 
diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
index 69abc4791ae5..e9a00e20002c 100644
--- a/arch/arm/include/asm/armv7.h
+++ b/arch/arm/include/asm/armv7.h
@@ -141,6 +141,8 @@ extern char __secure_end[];
 void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr,
 				 u32 cpu_rev_comb, u32 cpu_variant,
 				 u32 cpu_rev);
+void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
+			  u32 cpu_variant, u32 cpu_rev);
 #endif /* ! __ASSEMBLY__ */
 
 #endif
-- 
1.7.9.5

  parent reply	other threads:[~2015-03-09 22:12 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-09 22:11 [U-Boot] [PATCH V6 00/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Nishanth Menon
2015-03-09 22:11 ` [U-Boot] [PATCH V6 01/11] ARM: Introduce erratum workaround for 798870 Nishanth Menon
2015-03-11 15:48   ` Tom Rini
2015-03-15 21:50   ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` Nishanth Menon [this message]
2015-03-11 15:48   ` [U-Boot] [PATCH V6 02/11] ARM: Introduce erratum workaround for 454179 Tom Rini
2015-03-15 21:50   ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 03/11] ARM: Introduce erratum workaround for 430973 Nishanth Menon
2015-03-11 15:48   ` Tom Rini
2015-03-15 21:50   ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 04/11] ARM: Introduce erratum workaround for 621766 Nishanth Menon
2015-03-11 15:48   ` Tom Rini
2015-03-15 21:50   ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 05/11] ARM: OMAP: Change set_pl310_ctrl_reg to be generic Nishanth Menon
2015-03-11 15:48   ` Tom Rini
2015-03-15 21:51   ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 06/11] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs Nishanth Menon
2015-03-11 15:48   ` Tom Rini
2015-03-15 21:51   ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 07/11] ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1 Nishanth Menon
2015-03-11 15:48   ` Tom Rini
2015-03-11 15:53     ` Nishanth Menon
2015-03-11 16:00       ` Tom Rini
2015-03-11 16:04         ` Nishanth Menon
2015-03-11 20:26           ` Paul Kocialkowski
2015-03-11 21:16             ` Tom Rini
2015-03-11 21:33               ` Paul Kocialkowski
2015-03-15 21:51   ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 08/11] ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870 Nishanth Menon
2015-03-11 15:48   ` Tom Rini
2015-03-15 21:51   ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 09/11] ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration Nishanth Menon
2015-03-11 15:49   ` Tom Rini
2015-03-15 21:51   ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 10/11] ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 Nishanth Menon
2015-03-11 15:51   ` Tom Rini
2015-03-15 21:51   ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 11/11] ARM: OMAP3: rx51: " Nishanth Menon
2015-03-11 15:51   ` Tom Rini
2015-03-15 21:51   ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-11 15:48 ` [U-Boot] [PATCH V6 00/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Tom Rini
2015-03-11 15:51   ` Nishanth Menon
2015-03-11 16:00     ` Tom Rini
2015-03-12  0:26       ` Matt Porter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425939129-308-3-git-send-email-nm@ti.com \
    --to=nm@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox