From: Nishanth Menon <nm@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V6 04/11] ARM: Introduce erratum workaround for 621766
Date: Mon, 9 Mar 2015 17:12:02 -0500 [thread overview]
Message-ID: <1425939129-308-5-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1425939129-308-1-git-send-email-nm@ti.com>
621766: Under a specific set of conditions, executing a sequence of
NEON or vfp load instructions can cause processor deadlock
Impacts: Every Cortex-A8 processors with revision lower than r2p1
Work around: Set L1NEON to 1
Based on ARM errata Document revision 20.0 (13 Nov 2010)
Signed-off-by: Nishanth Menon <nm@ti.com>
---
README | 1 +
arch/arm/cpu/armv7/start.S | 13 +++++++++++++
2 files changed, 14 insertions(+)
diff --git a/README b/README
index 82f7e10c71d6..e7e90a08145e 100644
--- a/README
+++ b/README
@@ -695,6 +695,7 @@ The following options need to be configured:
specific checks, but expect no product checks.
CONFIG_ARM_ERRATA_430973
CONFIG_ARM_ERRATA_454179
+ CONFIG_ARM_ERRATA_621766
CONFIG_ARM_ERRATA_798870
- Driver Model
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 41fb24cf321b..5050021e0210 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -215,6 +215,19 @@ skip_errata_454179:
skip_errata_430973:
#endif
+#ifdef CONFIG_ARM_ERRATA_621766
+ cmp r2, #0x21 @ Only on < r2p1
+ bge skip_errata_621766
+
+ mrc p15, 0, r0, c1, c0, 1 @ Read ACR
+ orr r0, r0, #(0x1 << 5) @ Set L1NEON bit
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_acr
+ pop {r1-r5} @ Restore the cpu info - fall through
+
+skip_errata_621766:
+#endif
+
mov pc, r5 @ back to my caller
ENDPROC(cpu_init_cp15)
--
1.7.9.5
next prev parent reply other threads:[~2015-03-09 22:12 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-09 22:11 [U-Boot] [PATCH V6 00/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Nishanth Menon
2015-03-09 22:11 ` [U-Boot] [PATCH V6 01/11] ARM: Introduce erratum workaround for 798870 Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:50 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 02/11] ARM: Introduce erratum workaround for 454179 Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:50 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 03/11] ARM: Introduce erratum workaround for 430973 Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:50 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` Nishanth Menon [this message]
2015-03-11 15:48 ` [U-Boot] [PATCH V6 04/11] ARM: Introduce erratum workaround for 621766 Tom Rini
2015-03-15 21:50 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 05/11] ARM: OMAP: Change set_pl310_ctrl_reg to be generic Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 06/11] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 07/11] ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1 Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-11 15:53 ` Nishanth Menon
2015-03-11 16:00 ` Tom Rini
2015-03-11 16:04 ` Nishanth Menon
2015-03-11 20:26 ` Paul Kocialkowski
2015-03-11 21:16 ` Tom Rini
2015-03-11 21:33 ` Paul Kocialkowski
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 08/11] ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870 Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 09/11] ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration Nishanth Menon
2015-03-11 15:49 ` Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 10/11] ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 Nishanth Menon
2015-03-11 15:51 ` Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 11/11] ARM: OMAP3: rx51: " Nishanth Menon
2015-03-11 15:51 ` Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-11 15:48 ` [U-Boot] [PATCH V6 00/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Tom Rini
2015-03-11 15:51 ` Nishanth Menon
2015-03-11 16:00 ` Tom Rini
2015-03-12 0:26 ` Matt Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425939129-308-5-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox