From: Nishanth Menon <nm@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V6 08/11] ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870
Date: Mon, 9 Mar 2015 17:12:06 -0500 [thread overview]
Message-ID: <1425939129-308-9-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1425939129-308-1-git-send-email-nm@ti.com>
From: Praveen Rao <prao@ti.com>
This patch enables the workaround for ARM errata 798870 for OMAP5 /
DRA7 which says "If back-to-back speculative cache line fills (fill
A and fill B) are issued from the L1 data cache of a CPU to the
L2 cache, the second request (fill B) is then cancelled, and the
second request would have detected a hazard against a recent write or
eviction (write B) to the same cache line as fill B then the L2 logic
might deadlock."
An l2auxctlr accessor implementation for OMAP5 and DRA7 is introduced
here as well.
Signed-off-by: Praveen Rao <prao@ti.com>
Signed-off-by: Angela Stegmaier <angelabaker@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/cpu/armv7/omap5/hwinit.c | 7 +++++++
arch/arm/include/asm/arch-omap5/sys_proto.h | 3 +++
include/configs/ti_omap5_common.h | 3 +++
3 files changed, 13 insertions(+)
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index a8a474a88be9..f8060555b680 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -381,3 +381,10 @@ void setup_warmreset_time(void)
rst_val |= rst_time;
writel(rst_val, (*prcm)->prm_rsttime);
}
+
+void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr,
+ u32 cpu_rev_comb, u32 cpu_variant,
+ u32 cpu_rev)
+{
+ omap_smc1(OMAP5_SERVICE_L2ACTLR_SET, l2auxctrl);
+}
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 103830319a41..ea84665f5b97 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -66,4 +66,7 @@ static inline u32 usec_to_32k(u32 usec)
{
return div_round_up(32768 * usec, 1000000);
}
+
+#define OMAP5_SERVICE_L2ACTLR_SET 0x104
+
#endif
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 925cb42dd38d..09f05f18a75d 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -21,6 +21,9 @@
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_ARCH_CPU_INIT
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_798870
+
#define CONFIG_SYS_CACHELINE_SIZE 64
/* Use General purpose timer 1 */
--
1.7.9.5
next prev parent reply other threads:[~2015-03-09 22:12 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-09 22:11 [U-Boot] [PATCH V6 00/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Nishanth Menon
2015-03-09 22:11 ` [U-Boot] [PATCH V6 01/11] ARM: Introduce erratum workaround for 798870 Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:50 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 02/11] ARM: Introduce erratum workaround for 454179 Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:50 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 03/11] ARM: Introduce erratum workaround for 430973 Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:50 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 04/11] ARM: Introduce erratum workaround for 621766 Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:50 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 05/11] ARM: OMAP: Change set_pl310_ctrl_reg to be generic Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 06/11] ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 07/11] ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1 Nishanth Menon
2015-03-11 15:48 ` Tom Rini
2015-03-11 15:53 ` Nishanth Menon
2015-03-11 16:00 ` Tom Rini
2015-03-11 16:04 ` Nishanth Menon
2015-03-11 20:26 ` Paul Kocialkowski
2015-03-11 21:16 ` Tom Rini
2015-03-11 21:33 ` Paul Kocialkowski
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` Nishanth Menon [this message]
2015-03-11 15:48 ` [U-Boot] [PATCH V6 08/11] ARM: DRA7 / OMAP5: Add workaround for ARM errata 798870 Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 09/11] ARM: OMAP5 / DRA7: Setup L2 Aux Control Register with recommended configuration Nishanth Menon
2015-03-11 15:49 ` Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 10/11] ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766 Nishanth Menon
2015-03-11 15:51 ` Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-09 22:12 ` [U-Boot] [PATCH V6 11/11] ARM: OMAP3: rx51: " Nishanth Menon
2015-03-11 15:51 ` Tom Rini
2015-03-15 21:51 ` [U-Boot] [U-Boot, V6, " Tom Rini
2015-03-11 15:48 ` [U-Boot] [PATCH V6 00/11] ARM: OMAP3-DRA7: CP15 erratum workarounds and improvements Tom Rini
2015-03-11 15:51 ` Nishanth Menon
2015-03-11 16:00 ` Tom Rini
2015-03-12 0:26 ` Matt Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425939129-308-9-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox