[U-Boot] [PATCH] sdhci: fix warnings on 64-bit builds

Rob Herring
2015-03-17T20:46:38Z

Change addresses to unsigned long to be compatible with 64-bit builds.
Regardless of fixing warnings, the device is still only 32-bit capable.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
---
drivers/mmc/sdhci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 82d7984..2d92204 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -194,13 +194,13 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,

#ifdef CONFIG_MMC_SDMA
if (data->flags == MMC_DATA_READ)
- start_addr = (unsigned int)data->dest;
+ start_addr = (unsigned long)data->dest;
else
- start_addr = (unsigned int)data->src;
+ start_addr = (unsigned long)data->src;
if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
(start_addr & 0x7) != 0x0) {
is_aligned = 0;
- start_addr = (unsigned int)aligned_buffer;
+ start_addr = (unsigned long)aligned_buffer;
if (data->flags != MMC_DATA_READ)
memcpy(aligned_buffer, data->src, trans_bytes);
}
--
2.1.0