[U-Boot] [PATCH v2] sunxi: Avoid any assumption between musb gadget and host but fallback to host

[Paul Kocialkowski <contact@paulk.fr>]

Le dimanche 29 mars 2015 ? 13:18 +0200, Hans de Goede a ?crit :
> Hi,
> 
> On 28-03-15 18:26, Paul Kocialkowski wrote:
> > musb might be used in gadget mode on sunxi, so we don't want to assume anything
> > related to host mode, especially USB keyboard support. Thus, there is no reason
> > to keep USB_KEYBOARD always enabled and in Kconfig: it is much better fit to
> > enable it in the common sunxi config header, when needed (some devices also have
> > no USB support at all).
> >
> > In case gadget mode is not explicitly enabled, this will fallback to host mode.
> >
> > Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> 
> Nack, I'm not going to take any patch which removes config USB_KEYBOARD,
> having USB_KEYBOARD always enabled on devices with usb host capability
> causes a significant penalty in boot time, and some people may want to turn
> it off because of that.

Actually, I said I would give up on this, but there are still parts of
that patch that I need for USB gadget (not related to USB keyboard).

Regarding USB keyboard, the best solution IMO would be to set it
disabled by default in board/sunxi/Kconfig (both because of the boot
time penality and because it's not relevant when using gadget mode) and
have it enabled individually in each configs/*_defconfig that uses USB
in host mode.

> Regards,
> 
> Hans
> 
> 
> 
> > ---
> >   board/sunxi/Kconfig            | 7 -------
> >   configs/MSI_Primo73_defconfig  | 1 -
> >   configs/MSI_Primo81_defconfig  | 1 -
> >   include/configs/sunxi-common.h | 5 ++++-
> >   4 files changed, 4 insertions(+), 10 deletions(-)
> >
> > diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
> > index 57e7529..75e3fb3 100644
> > --- a/board/sunxi/Kconfig
> > +++ b/board/sunxi/Kconfig
> > @@ -452,13 +452,6 @@ config USB_MUSB_SUNXI
> >   	one usb host controller enabled at a time, so enabling this on boards
> >   	which also use the ehci host controller will result in build errors.
> >
> > -config USB_KEYBOARD
> > -	boolean "Enable USB keyboard support"
> > -	default y
> > -	---help---
> > -	Say Y here to add support for using a USB keyboard (typically used
> > -	in combination with a graphical console).
> > -
> >   config GMAC_TX_DELAY
> >   	int "GMAC Transmit Clock Delay Chain"
> >   	default 0
> > diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig
> > index 5227b6f..f621237 100644
> > --- a/configs/MSI_Primo73_defconfig
> > +++ b/configs/MSI_Primo73_defconfig
> > @@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
> >   CONFIG_VIDEO_LCD_POWER="PH8"
> >   CONFIG_VIDEO_LCD_BL_EN="PH7"
> >   CONFIG_VIDEO_LCD_BL_PWM="PB2"
> > -CONFIG_USB_KEYBOARD=n
> >   CONFIG_ARM=y
> >   CONFIG_ARCH_SUNXI=y
> >   CONFIG_MACH_SUN7I=y
> > diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
> > index b6aa876..4e1d167 100644
> > --- a/configs/MSI_Primo81_defconfig
> > +++ b/configs/MSI_Primo81_defconfig
> > @@ -20,7 +20,6 @@ CONFIG_VIDEO_LCD_SPI_MOSI="PH11"
> >   CONFIG_VIDEO_LCD_SPI_MISO="PH12"
> >   CONFIG_VIDEO_LCD_BL_EN="PA25"
> >   CONFIG_VIDEO_LCD_BL_PWM="PH13"
> > -CONFIG_USB_KEYBOARD=n
> >   CONFIG_ARM=y
> >   CONFIG_ARCH_SUNXI=y
> >   CONFIG_MACH_SUN6I=y
> > diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
> > index b9bb971..61a45e1 100644
> > --- a/include/configs/sunxi-common.h
> > +++ b/include/configs/sunxi-common.h
> > @@ -298,13 +298,16 @@ extern int soft_i2c_gpio_scl;
> >   #endif
> >
> >   #ifdef CONFIG_USB_MUSB_SUNXI
> > +#ifndef CONFIG_MUSB_GADGET
> >   #define CONFIG_MUSB_HOST
> > +#endif
> >   #define CONFIG_MUSB_PIO_ONLY
> >   #endif
> >
> > -#if defined CONFIG_USB_EHCI || defined CONFIG_USB_MUSB_SUNXI
> > +#if defined CONFIG_USB_EHCI || defined CONFIG_MUSB_HOST
> >   #define CONFIG_CMD_USB
> >   #define CONFIG_USB_STORAGE
> > +#define CONFIG_USB_KEYBOARD
> >   #endif
> >
> >   #ifdef CONFIG_USB_KEYBOARD
> >

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150404/29f6c2ae/attachment.sig>