From: Axel Lin <axel.lin@ingics.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] gpio: lpc32xx: Use priv_data instead of platdata
Date: Tue, 14 Apr 2015 14:55:24 +0800 [thread overview]
Message-ID: <1428994524.6450.1.camel@phoenix> (raw)
The LPC32XX GPIO driver platdata currently contains GPIO state information,
which should go into priv_data. Thus rename lpc32xx_gpio_platdata to
lpc32xx_gpio_priv and convert to use dev_get_priv() instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
v2: Update commit log to mention that using priv_data for runtime state
which was stored in platdata.
drivers/gpio/lpc32xx_gpio.c | 39 +++++++++++++++++++--------------------
1 file changed, 19 insertions(+), 20 deletions(-)
diff --git a/drivers/gpio/lpc32xx_gpio.c b/drivers/gpio/lpc32xx_gpio.c
index 96b3125..8a9826e 100644
--- a/drivers/gpio/lpc32xx_gpio.c
+++ b/drivers/gpio/lpc32xx_gpio.c
@@ -37,7 +37,7 @@
#define LPC32XX_GPIOS 128
-struct lpc32xx_gpio_platdata {
+struct lpc32xx_gpio_priv {
struct gpio_regs *regs;
/* GPIO FUNCTION: SEE WARNING #2 */
signed char function[LPC32XX_GPIOS];
@@ -60,8 +60,8 @@ struct lpc32xx_gpio_platdata {
static int lpc32xx_gpio_direction_input(struct udevice *dev, unsigned offset)
{
int port, mask;
- struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
- struct gpio_regs *regs = gpio_platdata->regs;
+ struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
+ struct gpio_regs *regs = gpio_priv->regs;
port = GPIO_TO_PORT(offset);
mask = GPIO_TO_MASK(offset);
@@ -83,7 +83,7 @@ static int lpc32xx_gpio_direction_input(struct udevice *dev, unsigned offset)
}
/* GPIO FUNCTION: SEE WARNING #2 */
- gpio_platdata->function[offset] = GPIOF_INPUT;
+ gpio_priv->function[offset] = GPIOF_INPUT;
return 0;
}
@@ -95,8 +95,8 @@ static int lpc32xx_gpio_direction_input(struct udevice *dev, unsigned offset)
static int lpc32xx_gpio_get_value(struct udevice *dev, unsigned offset)
{
int port, rank, mask, value;
- struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
- struct gpio_regs *regs = gpio_platdata->regs;
+ struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
+ struct gpio_regs *regs = gpio_priv->regs;
port = GPIO_TO_PORT(offset);
@@ -130,8 +130,8 @@ static int lpc32xx_gpio_get_value(struct udevice *dev, unsigned offset)
static int gpio_set(struct udevice *dev, unsigned gpio)
{
int port, mask;
- struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
- struct gpio_regs *regs = gpio_platdata->regs;
+ struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
+ struct gpio_regs *regs = gpio_priv->regs;
port = GPIO_TO_PORT(gpio);
mask = GPIO_TO_MASK(gpio);
@@ -162,8 +162,8 @@ static int gpio_set(struct udevice *dev, unsigned gpio)
static int gpio_clr(struct udevice *dev, unsigned gpio)
{
int port, mask;
- struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
- struct gpio_regs *regs = gpio_platdata->regs;
+ struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
+ struct gpio_regs *regs = gpio_priv->regs;
port = GPIO_TO_PORT(gpio);
mask = GPIO_TO_MASK(gpio);
@@ -208,8 +208,8 @@ static int lpc32xx_gpio_direction_output(struct udevice *dev, unsigned offset,
int value)
{
int port, mask;
- struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
- struct gpio_regs *regs = gpio_platdata->regs;
+ struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
+ struct gpio_regs *regs = gpio_priv->regs;
port = GPIO_TO_PORT(offset);
mask = GPIO_TO_MASK(offset);
@@ -231,7 +231,7 @@ static int lpc32xx_gpio_direction_output(struct udevice *dev, unsigned offset,
}
/* GPIO FUNCTION: SEE WARNING #2 */
- gpio_platdata->function[offset] = GPIOF_OUTPUT;
+ gpio_priv->function[offset] = GPIOF_OUTPUT;
return lpc32xx_gpio_set_value(dev, offset, value);
}
@@ -251,8 +251,8 @@ static int lpc32xx_gpio_direction_output(struct udevice *dev, unsigned offset,
static int lpc32xx_gpio_get_function(struct udevice *dev, unsigned offset)
{
- struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
- return gpio_platdata->function[offset];
+ struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
+ return gpio_priv->function[offset];
}
static const struct dm_gpio_ops gpio_lpc32xx_ops = {
@@ -265,7 +265,7 @@ static const struct dm_gpio_ops gpio_lpc32xx_ops = {
static int lpc32xx_gpio_probe(struct udevice *dev)
{
- struct lpc32xx_gpio_platdata *gpio_platdata = dev_get_platdata(dev);
+ struct lpc32xx_gpio_priv *gpio_priv = dev_get_priv(dev);
struct gpio_dev_priv *uc_priv = dev->uclass_priv;
if (dev->of_offset == -1) {
@@ -274,12 +274,11 @@ static int lpc32xx_gpio_probe(struct udevice *dev)
}
/* set base address for GPIO registers */
- gpio_platdata->regs = (struct gpio_regs *)GPIO_BASE;
+ gpio_priv->regs = (struct gpio_regs *)GPIO_BASE;
/* all GPIO functions are unknown until requested */
/* GPIO FUNCTION: SEE WARNING #2 */
- memset(gpio_platdata->function, GPIOF_UNKNOWN,
- sizeof(gpio_platdata->function));
+ memset(gpio_priv->function, GPIOF_UNKNOWN, sizeof(gpio_priv->function));
return 0;
}
@@ -289,5 +288,5 @@ U_BOOT_DRIVER(gpio_lpc32xx) = {
.id = UCLASS_GPIO,
.ops = &gpio_lpc32xx_ops,
.probe = lpc32xx_gpio_probe,
- .priv_auto_alloc_size = sizeof(struct lpc32xx_gpio_platdata),
+ .priv_auto_alloc_size = sizeof(struct lpc32xx_gpio_priv),
};
--
1.9.1
next reply other threads:[~2015-04-14 6:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-14 6:55 Axel Lin [this message]
2015-04-16 11:52 ` [U-Boot] [PATCH v2] gpio: lpc32xx: Use priv_data instead of platdata Albert ARIBAUD
2015-06-03 17:24 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428994524.6450.1.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox