[U-Boot] [PATCH v4 5/6] mx6cuboxi: Use more standard namings for fdt variables

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <fabio.estevam@freescale.com>

Use the more standard fdtfile and fdtaddr variable names.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v3:
- Newly introduced in this series as per Vagrant Cascadian's suggestion

 include/configs/mx6cuboxi.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index 5d58b16..bc7c577 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -88,8 +88,8 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"fdt_addr=0x18000000\0" \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdtaddr=0x18000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"console=" CONFIG_CONSOLE_DEV "\0" \
@@ -117,12 +117,12 @@
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdtaddr} ${fdtfile}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdtaddr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootz; " \
@@ -145,8 +145,8 @@
 		"fi; " \
 		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \
+				"bootz ${loadaddr} - ${fdtaddr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootz; " \
-- 
1.9.1