[U-Boot] [PATCH 3/5] arm: make relocation symbols compiler-generated

["Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>]

Hi Albert,

On Tuesday, May 14, 2013 10:02:58 PM, Albert ARIBAUD wrote:
> This change is only done where needed: some linker
> scripts may contain relocation symbols yet remain
> unchanged.
> 
> __rel_dyn_start, __rel_dyn_end and __dynsym_start
> each requires its own output section; putting them
> in relocation sections changes the sections' nature
> which breaks relocation.
> 
> Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>

[...]

> diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S
> index 2f22c8c..818735c 100644
> --- a/arch/arm/lib/relocate.S
> +++ b/arch/arm/lib/relocate.S
> @@ -54,12 +54,9 @@ copy_loop:
>  	/*
>  	 * fix .rel.dyn relocations
>  	 */
> -	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
> -	add	r10, r10, r9		/* r10 <- sym table in FLASH */
> -	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
> -	add	r2, r2, r9		/* r2 <- rel dyn start in FLASH */
> -	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
> -	add	r3, r3, r9		/* r3 <- rel dyn end in FLASH */
> +	ldr	r10, =__dynsym_start	/* r10 <- sym table ofs */
> +	ldr	r2, =__rel_dyn_start	/* r2 <- rel dyn start ofs */
> +	ldr	r3, =__rel_dyn_end	/* r3 <- rel dyn end ofs */

'ofs' -> 'in FLASH' in the comments of the 3 lines above.

>  fixloop:
>  	ldr	r0, [r2]		/* r0 <- SRC location to fix up */
>  	add	r0, r0, r9		/* r0 <- DST location to fix up */
> @@ -98,11 +95,4 @@ relocate_done:
>          bx        lr
>  #endif
>  
> -_rel_dyn_start_ofs:
> -	.word __rel_dyn_start - relocate_code
> -_rel_dyn_end_ofs:
> -	.word __rel_dyn_end - relocate_code
> -_dynsym_start_ofs:
> -	.word __dynsym_start - relocate_code
> -
>  ENDPROC(relocate_code)

[...]

Best regards,
Beno?t