public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Maxin B. John <maxin.john@enea.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] Bananapi: Fix ethernet device initialization
Date: Sun, 7 Jun 2015 15:25:36 +0200	[thread overview]
Message-ID: <1433683536-48879-1-git-send-email-maxin.john@enea.com> (raw)

Ethernet device initialization fails with the following message:
Net:   PH: dir_output: error: gpio PH23 not reserved
Phy 1 not found
PHY reset timed out
eth0: ethernet at 01c50000

Tested on Banana Pi board.

Signed-off-by: Maxin B. John <maxin.john@enea.com>
---
 arch/arm/cpu/armv7/sunxi/board.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index a82c8b9..4b2494e 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -223,6 +223,7 @@ int cpu_eth_init(bd_t *bis)
 	__maybe_unused int rc;
 
 #ifdef CONFIG_MACPWR
+	gpio_request(CONFIG_MACPWR, "macpwr");
 	gpio_direction_output(CONFIG_MACPWR, 1);
 	mdelay(200);
 #endif
-- 
1.9.1

             reply	other threads:[~2015-06-07 13:25 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-07 13:25 Maxin B. John [this message]
2015-06-08 13:23 ` [U-Boot] [PATCH v2] Bananapi: Fix ethernet device initialization Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433683536-48879-1-git-send-email-maxin.john@enea.com \
    --to=maxin.john@enea.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox