[U-Boot] [PATCH RFT] gpio: vybrid: Fix up setting output value in vybrid_gpio_direction_output

[Axel Lin <axel.lin@ingics.com>]

Pass correct gpio argument to gpio_set_value().
The calcualation of gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
is required for calling imx_iomux_gpio_* functions so move them close to
improve readability.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
Hi Bhuvanchandra,
I think current code does not pass correct gpio argument to gpio_set_value()
in vybrid_gpio_direction_output(). It only works if gpios->chip is 0.
I don't have the h/w to test, can you double check this?
Thanks,
Axel
 drivers/gpio/vybrid_gpio.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/vybrid_gpio.c b/drivers/gpio/vybrid_gpio.c
index 6eaf0a9..33bbf54 100644
--- a/drivers/gpio/vybrid_gpio.c
+++ b/drivers/gpio/vybrid_gpio.c
@@ -36,8 +36,9 @@ static int vybrid_gpio_direction_output(struct udevice *dev, unsigned gpio,
 {
 	const struct vybrid_gpios *gpios = dev_get_priv(dev);
 
-	gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
 	gpio_set_value(gpio, value);
+
+	gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
 	imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_OUT);
 
 	return 0;
@@ -54,6 +55,7 @@ static int vybrid_gpio_set_value(struct udevice *dev, unsigned gpio,
 				  int value)
 {
 	const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
 	if (value)
 		writel((1 << gpio), &gpios->reg->gpio_psor);
 	else
@@ -68,7 +70,6 @@ static int vybrid_gpio_get_function(struct udevice *dev, unsigned gpio)
 	u32 g_state = 0;
 
 	gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
-
 	imx_iomux_gpio_get_function(gpio, &g_state);
 
 	if (((g_state & (0x07 << PAD_MUX_MODE_SHIFT)) >> PAD_MUX_MODE_SHIFT) > 0)
-- 
2.1.0