From: Alexander Stein <alexanders83@web.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 0/7] dcache support for Raspberry Pi 1
Date: Wed, 22 Jul 2015 20:23:31 +0200 [thread overview]
Message-ID: <1437589418-11978-1-git-send-email-alexanders83@web.de> (raw)
This patchset enables dcache support for Raspberry Pi 1.
First the cache support code for arm1136 and 1176 was merged.
CONFIG_SYS_CACHELINE_SIZE is defined as 32 bytes which is used as alignment
for mailbox buffer allocations.
Then rpi mailbox code has now dcache flush for writing the mailbox request and
a dcache invalidation for receiving the mailbox answer.
Finally the CONFIG_SYS_DCACHE_OFF switch got removed from rpi1 config. It is
still set for rpi2 config.
dcache supprt increases the MMC read performance on RPI 1 from 5,4 MiB/s to
12.3 MiB/s. TFTP download over USB Ethernet increases from 2,3 MiB/s to
2,6 to 3,3 MiB/s (seems to vary a lot).
This was tested by the following commands:
> fatload mmc 0:1 ${kernel_addr_r} zImage
and
> tftp u-boot.bin
Changes in v3:
* dwc2 dcache support
* Use ALLOC_CACHE_ALIGN_BUFFER for mailbox buffer allocation
* Use ARCH_DMA_MINALIGN for size to roundup
Changes in v2:
* Merge arm1136/1176 cache code
* Use cacheline size as mailbox buffer alignment
* Flush/invalidate mailbox buffer up to cacheline size
Alexander Stein (7):
arm1136: Remove dead code
arm1136/arm1176: Merge cache handling code
ARM: bcm283x: Define CONFIG_SYS_CACHELINE_SIZE
ARM: bcm283x: Allocate all mailbox buffers cacheline aligned
arm/mach-bcm283x/mbox: Flush and invalidate dcache when using fw
mailbox
dwc2: Add dcache support
arm/rpi: Enable dcache
arch/arm/cpu/arm11/Makefile | 8 ++
arch/arm/cpu/arm11/cpu.c | 150 ++++++++++++++++++++++++++++
arch/arm/cpu/arm1136/Makefile | 1 -
arch/arm/cpu/arm1136/cpu.c | 160 ------------------------------
arch/arm/cpu/arm1176/Makefile | 4 +-
arch/arm/cpu/arm1176/cpu.c | 51 ----------
arch/arm/mach-bcm283x/include/mach/mbox.h | 3 +
arch/arm/mach-bcm283x/mbox.c | 9 ++
board/raspberrypi/rpi/rpi.c | 10 +-
drivers/usb/host/dwc2.c | 16 ++-
drivers/video/bcm2835.c | 4 +-
include/configs/rpi-common.h | 2 +-
include/configs/rpi_2.h | 1 +
13 files changed, 195 insertions(+), 224 deletions(-)
create mode 100644 arch/arm/cpu/arm11/Makefile
create mode 100644 arch/arm/cpu/arm11/cpu.c
delete mode 100644 arch/arm/cpu/arm1136/cpu.c
delete mode 100644 arch/arm/cpu/arm1176/cpu.c
--
2.4.6
next reply other threads:[~2015-07-22 18:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-22 18:23 Alexander Stein [this message]
2015-07-22 18:23 ` [U-Boot] [PATCH v3 1/7] arm1136: Remove dead code Alexander Stein
2015-07-22 18:23 ` [U-Boot] [PATCH v3 2/7] arm1136/arm1176: Merge cache handling code Alexander Stein
2015-07-24 4:52 ` Stephen Warren
2015-07-22 18:23 ` [U-Boot] [PATCH v3 3/7] ARM: bcm283x: Define CONFIG_SYS_CACHELINE_SIZE Alexander Stein
2015-07-24 4:54 ` Stephen Warren
2015-07-22 18:23 ` [U-Boot] [PATCH v3 4/7] ARM: bcm283x: Allocate all mailbox buffers cacheline aligned Alexander Stein
2015-07-22 18:23 ` [U-Boot] [PATCH v3 5/7] arm/mach-bcm283x/mbox: Flush and invalidate dcache when using fw mailbox Alexander Stein
2015-07-22 18:23 ` [U-Boot] [PATCH v3 6/7] dwc2: Add dcache support Alexander Stein
2015-07-24 4:59 ` Stephen Warren
2015-07-22 18:23 ` [U-Boot] [PATCH v3 7/7] arm/rpi: Enable dcache Alexander Stein
2015-07-24 5:00 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437589418-11978-1-git-send-email-alexanders83@web.de \
--to=alexanders83@web.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox