From: Nishanth Menon <nm@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V4 1/8] configs: split ti_armv7_common into a omap generic header
Date: Wed, 22 Jul 2015 18:05:41 -0500 [thread overview]
Message-ID: <1437606348-14067-2-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1437606348-14067-1-git-send-email-nm@ti.com>
TI armv7 based SoCs are based on two architectures - one based on OMAP
generation architecture and others based on Keystone architecture.
Many of the options are architecture specific, however a lot are common
with v7 architecture. So, step 1 will be to move out OMAP specific stuff
from ti_armv7_common into a ti_armv7_omap.h header which is then used
by all the relevant architecture headers.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
V4: update Reviewed by, no functional change
V3: https://patchwork.ozlabs.org/patch/497385/
V2: https://patchwork.ozlabs.org/patch/496820/
V1: https://patchwork.ozlabs.org/patch/496726/
include/configs/am43xx_evm.h | 2 +-
include/configs/ti_am335x_common.h | 2 +-
include/configs/ti_armv7_common.h | 21 ----------------
include/configs/ti_armv7_omap.h | 49 ++++++++++++++++++++++++++++++++++++++
include/configs/ti_omap3_common.h | 2 +-
include/configs/ti_omap4_common.h | 2 +-
include/configs/ti_omap5_common.h | 2 +-
7 files changed, 54 insertions(+), 26 deletions(-)
create mode 100644 include/configs/ti_armv7_omap.h
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 33e534a76583..65ac8ef34eb8 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -80,7 +80,7 @@
#endif
/* Now bring in the rest of the common code. */
-#include <configs/ti_armv7_common.h>
+#include <configs/ti_armv7_omap.h>
/* Always 64 KiB env size */
#define CONFIG_ENV_SIZE (64 << 10)
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 4d2ae280e7f1..9697431b4496 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -94,6 +94,6 @@
#endif
/* Now bring in the rest of the common code. */
-#include <configs/ti_armv7_common.h>
+#include <configs/ti_armv7_omap.h>
#endif /* __CONFIG_TI_AM335X_COMMON_H__ */
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index 0aea7d12ec16..63244dbc83ff 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -18,8 +18,6 @@
#define __CONFIG_TI_ARMV7_COMMON_H__
/* Common define for many platforms. */
-#define CONFIG_OMAP
-#define CONFIG_OMAP_COMMON
#define CONFIG_SYS_GENERIC_BOARD
/*
@@ -86,39 +84,20 @@
#define CONFIG_I2C
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
-#define CONFIG_SYS_I2C_OMAP24XX
/* MMC/SD IP block */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_OMAP_HSMMC
#define CONFIG_CMD_MMC
/* McSPI IP block */
#define CONFIG_SPI
-#define CONFIG_OMAP3_SPI
#define CONFIG_CMD_SPI
/* GPIO block */
-#define CONFIG_OMAP_GPIO
#define CONFIG_CMD_GPIO
/*
- * GPMC NAND block. We support 1 device and the physical address to
- * access CS0 at is 0x8000000.
- */
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC
-#ifndef CONFIG_SYS_NAND_BASE
-#define CONFIG_SYS_NAND_BASE 0x8000000
-#endif
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_CMD_NAND
-#endif
-
-/*
* The following are general good-enough settings for U-Boot. We set a
* large malloc pool as we generally have a lot of DDR, and we opt for
* function over binary size in the main portion of U-Boot as this is
diff --git a/include/configs/ti_armv7_omap.h b/include/configs/ti_armv7_omap.h
new file mode 100644
index 000000000000..7548170afcf7
--- /dev/null
+++ b/include/configs/ti_armv7_omap.h
@@ -0,0 +1,49 @@
+/*
+ * ti_armv7_omap.h
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * The various ARMv7 SoCs from TI all share a number of IP blocks when
+ * implementing a given feature. This is meant to isolate the features
+ * that are based on OMAP architecture.
+ */
+#ifndef __CONFIG_TI_ARMV7_OMAP_H__
+#define __CONFIG_TI_ARMV7_OMAP_H__
+
+/* Common defines for all OMAP architecture based SoCs */
+#define CONFIG_OMAP
+#define CONFIG_OMAP_COMMON
+
+/* I2C IP block */
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP24XX
+
+/* MMC/SD IP block */
+#define CONFIG_OMAP_HSMMC
+
+/* SPI IP Block */
+#define CONFIG_OMAP3_SPI
+
+/* GPIO block */
+#define CONFIG_OMAP_GPIO
+
+/*
+ * GPMC NAND block. We support 1 device and the physical address to
+ * access CS0 at is 0x8000000.
+ */
+#ifdef CONFIG_NAND
+#define CONFIG_NAND_OMAP_GPMC
+#ifndef CONFIG_SYS_NAND_BASE
+#define CONFIG_SYS_NAND_BASE 0x8000000
+#endif
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_CMD_NAND
+#endif
+
+/* Now for the remaining common defines */
+#include <configs/ti_armv7_common.h>
+
+#endif /* __CONFIG_TI_ARMV7_OMAP_H__ */
diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
index 429b109afa23..be231a551361 100644
--- a/include/configs/ti_omap3_common.h
+++ b/include/configs/ti_omap3_common.h
@@ -84,6 +84,6 @@
#endif
/* Now bring in the rest of the common code. */
-#include <configs/ti_armv7_common.h>
+#include <configs/ti_armv7_omap.h>
#endif /* __CONFIG_TI_OMAP3_COMMON_H__ */
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index e96613406b3b..959f312edb5b 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -52,7 +52,7 @@
#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
#endif
-#include <configs/ti_armv7_common.h>
+#include <configs/ti_armv7_omap.h>
/*
* Hardware drivers
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index f3e5a7587de9..789542be6710 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -47,7 +47,7 @@
#include <asm/arch/cpu.h>
#include <asm/arch/omap.h>
-#include <configs/ti_armv7_common.h>
+#include <configs/ti_armv7_omap.h>
/*
* Hardware drivers
--
2.1.4
next prev parent reply other threads:[~2015-07-22 23:05 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-22 23:05 [U-Boot] [PATCH V4 0/8] configs: make keystone2 configs start using armv7 common header Nishanth Menon
2015-07-22 23:05 ` Nishanth Menon [this message]
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, 1/8] configs: split ti_armv7_common into a omap generic header Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 2/8] configs: ti: armv7_common: enable Thumb mode for all Nishanth Menon
2015-07-23 21:00 ` Tom Rini
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 3/8] board: ks2_evm: get rid of bogus CONFIG_LINUX_BOOT_PARAM_ADDR Nishanth Menon
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 4/8] configs: rename ks2_evm into ti_armv7_keystone2 Nishanth Menon
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 5/8] configs: ti_armv7_keystone2: start using armv7_common Nishanth Menon
2015-07-23 21:01 ` Tom Rini
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 6/8] configs: ti_armv7_keystone2: switch addresses to generic addresses Nishanth Menon
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 7/8] configs: ti_armv7_keystone2: switch to using kernel zImage Nishanth Menon
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 8/8] configs: k2*_evm: rename skernel binary names to generated file names Nishanth Menon
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-23 13:34 ` [U-Boot] [PATCH V4 0/8] configs: make keystone2 configs start using armv7 common header Murali Karicheri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437606348-14067-2-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox