From: Nishanth Menon <nm@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V4 6/8] configs: ti_armv7_keystone2: switch addresses to generic addresses
Date: Wed, 22 Jul 2015 18:05:46 -0500 [thread overview]
Message-ID: <1437606348-14067-7-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1437606348-14067-1-git-send-email-nm@ti.com>
Use the defaults defined in DEFAULT_LINUX_BOOT_ENV
Reviewed-by: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
V4: only picked up reviewed-bys. no change
V3: https://patchwork.ozlabs.org/patch/497389/
include/configs/ti_armv7_keystone2.h | 22 +++++++++-------------
1 file changed, 9 insertions(+), 13 deletions(-)
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 0e67cf0ebd75..ddc2e23f1370 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -212,30 +212,26 @@
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_EXTRA_ENV_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV \
CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
"boot=ubi\0" \
"tftp_root=/\0" \
"nfs_root=/export\0" \
"mem_lpae=1\0" \
"mem_reserve=512M\0" \
- "addr_fdt=0x87000000\0" \
- "addr_kern=0x88000000\0" \
- "addr_uboot=0x87000000\0" \
- "addr_fs=0x82000000\0" \
"addr_ubi=0x82000000\0" \
"addr_secdb_key=0xc000000\0" \
- "fdt_high=0xffffffff\0" \
"name_kern=uImage-keystone-evm.bin\0" \
"run_mon=mon_install ${addr_mon}\0" \
- "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \
+ "run_kern=bootm ${loadaddr} - ${fdtaddr}\0" \
"init_net=run args_all args_net\0" \
"init_ubi=run args_all args_ubi; " \
"ubi part ubifs; ubifsmount ubi:boot;" \
"ubifsload ${addr_secdb_key} securedb.key.bin;\0" \
- "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
- "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \
- "get_kern_net=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
- "get_kern_ubi=ubifsload ${addr_kern} ${name_kern}\0" \
+ "get_fdt_net=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0" \
+ "get_fdt_ubi=ubifsload ${fdtaddr} ${name_fdt}\0" \
+ "get_kern_net=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0" \
+ "get_kern_ubi=ubifsload ${loadaddr} ${name_kern}\0" \
"get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
"get_mon_ubi=ubifsload ${addr_mon} ${name_mon}\0" \
"get_uboot_net=dhcp ${addr_uboot} ${tftp_root}/${name_uboot}\0" \
@@ -248,10 +244,10 @@
"root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
"${nfs_options} ip=dhcp\0" \
"nfs_options=v3,tcp,rsize=4096,wsize=4096\0" \
- "get_fdt_ramfs=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
- "get_kern_ramfs=dhcp ${addr_kern} ${tftp_root}/${name_kern}\0" \
+ "get_fdt_ramfs=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0" \
+ "get_kern_ramfs=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0" \
"get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0" \
- "get_fs_ramfs=dhcp ${addr_fs} ${tftp_root}/${name_fs}\0" \
+ "get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0" \
"get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0" \
"burn_ubi=nand erase.part ubifs; " \
"nand write ${addr_ubi} ubifs ${filesize}\0" \
--
2.1.4
next prev parent reply other threads:[~2015-07-22 23:05 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-22 23:05 [U-Boot] [PATCH V4 0/8] configs: make keystone2 configs start using armv7 common header Nishanth Menon
2015-07-22 23:05 ` [U-Boot] [PATCH V4 1/8] configs: split ti_armv7_common into a omap generic header Nishanth Menon
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 2/8] configs: ti: armv7_common: enable Thumb mode for all Nishanth Menon
2015-07-23 21:00 ` Tom Rini
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 3/8] board: ks2_evm: get rid of bogus CONFIG_LINUX_BOOT_PARAM_ADDR Nishanth Menon
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 4/8] configs: rename ks2_evm into ti_armv7_keystone2 Nishanth Menon
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 5/8] configs: ti_armv7_keystone2: start using armv7_common Nishanth Menon
2015-07-23 21:01 ` Tom Rini
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` Nishanth Menon [this message]
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, 6/8] configs: ti_armv7_keystone2: switch addresses to generic addresses Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 7/8] configs: ti_armv7_keystone2: switch to using kernel zImage Nishanth Menon
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-22 23:05 ` [U-Boot] [PATCH V4 8/8] configs: k2*_evm: rename skernel binary names to generated file names Nishanth Menon
2015-07-28 15:00 ` [U-Boot] [U-Boot, V4, " Tom Rini
2015-07-23 13:34 ` [U-Boot] [PATCH V4 0/8] configs: make keystone2 configs start using armv7 common header Murali Karicheri
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1437606348-14067-7-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox