public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Ian Campbell <ijc@hellion.org.uk>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 11/15] sunxi_nand_spl: Add support for sun4i and sun5i SoCs
Date: Mon, 17 Aug 2015 09:35:02 +0100	[thread overview]
Message-ID: <1439800502.3480.70.camel@hellion.org.uk> (raw)
In-Reply-To: <55D19BEF.3070902@redhat.com>

On Mon, 2015-08-17 at 10:31 +0200, Hans de Goede wrote:
> Hi,
> 
> On 17-08-15 10:29, Ian Campbell wrote:
> > On Sat, 2015-08-15 at 22:02 +0200, Hans de Goede wrote:
> > > Other then having a few less chip-select lines the nand 
> > > controller
> > > on sun4i, sun5i and sun7i is identical.
> > > 
> > > Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> > > ---
> > >   board/sunxi/board.c      | 12 +++++++++---
> > >   drivers/mtd/nand/Kconfig |  4 ++--
> > >   2 files changed, 11 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> > > index 1ebd0a4..d411e96 100644
> > > --- a/board/sunxi/board.c
> > > +++ b/board/sunxi/board.c
> > > @@ -112,13 +112,19 @@ int dram_init(void)
> > >   static void nand_pinmux_setup(void)
> > >   {
> > >   	unsigned int pin;
> > > -	for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(6); pin++)
> > > -		sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND);
> > > 
> > > -	for (pin = SUNXI_GPC(8); pin <= SUNXI_GPC(22); pin++)
> > > +	for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(19); pin++)
> > 
> > This looks to have added GPC(7) to all platforms, was that 
> > intentional?
> 
> Yes, as GPC7 is a nand pin on all platforms, no idea why the original
> code was skipping it. I should probably mention this in the commit 
> msg though.

Please, then: Acked-by: Ian Campbell <ijc@hellion.org.uk>

  reply	other threads:[~2015-08-17  8:35 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-15 20:02 [U-Boot] [PATCH 00/15] sunxi_nand_spl: cleanups, auto config and bad block handling Hans de Goede
2015-08-15 20:02 ` [U-Boot] [PATCH 01/15] sunxi_nand_spl: Fix CONFIG_SPL_NAND_SUNXI handling Hans de Goede
2015-08-17  8:11   ` Ian Campbell
2015-08-19 13:45   ` Maxime Ripard
2015-08-20  6:33     ` Hans de Goede
2015-08-27 12:36       ` Maxime Ripard
2015-08-15 20:02 ` [U-Boot] [PATCH 02/15] sunxi_nand_spl: Drop unnecessary temp buf Hans de Goede
2015-08-17  7:22   ` Chen-Yu Tsai
2015-08-17  8:14     ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 03/15] sunxi_nand_spl: We only need to reset the nand chip once Hans de Goede
2015-08-17  8:14   ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 04/15] sunxi_nand_spl: Do not bother writing the spare-area reg in syndrome mode Hans de Goede
2015-08-17  8:19   ` Ian Campbell
2015-08-17  8:59     ` Hans de Goede
2015-08-17 11:28       ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 05/15] sunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do nand init when necessary Hans de Goede
2015-08-17  8:20   ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 06/15] sunxi_nand_spl: Make sure the DMA controller is enabled Hans de Goede
2015-08-17  8:21   ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 07/15] sunxi_nand_spl: Turn off clocks when we're done with the nand Hans de Goede
2015-08-17  8:22   ` Ian Campbell
2015-08-19 13:48   ` Maxime Ripard
2015-08-20  6:35     ` Hans de Goede
2015-08-24 14:54       ` Maxime Ripard
2015-08-15 20:02 ` [U-Boot] [PATCH 08/15] sunxi_nand_spl: Add proper cache flusing Hans de Goede
2015-08-17  8:22   ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 09/15] sunxi_nand_spl: Use kernel driver algorithm for determining ecc_mode / _off Hans de Goede
2015-08-17  8:24   ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 10/15] sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END Hans de Goede
2015-08-17  8:27   ` Ian Campbell
2015-08-17  9:05     ` Hans de Goede
2015-08-15 20:02 ` [U-Boot] [PATCH 11/15] sunxi_nand_spl: Add support for sun4i and sun5i SoCs Hans de Goede
2015-08-17  8:29   ` Ian Campbell
2015-08-17  8:31     ` Hans de Goede
2015-08-17  8:35       ` Ian Campbell [this message]
2015-08-15 20:02 ` [U-Boot] [PATCH 12/15] sunxi_nand_spl: Properly config page-size in the nand ctl register Hans de Goede
2015-08-17  8:29   ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 13/15] sunxi_nand_spl: Parametrize lowlevel read functions Hans de Goede
2015-08-17  8:31   ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 14/15] sunxi_nand_spl: Auto detect nand configuration parameters Hans de Goede
2015-08-17  8:32   ` Ian Campbell
2015-08-15 20:02 ` [U-Boot] [PATCH 15/15] sunxi_nand_spl: Add support for backup boot partitions Hans de Goede
2015-08-17  8:34   ` Ian Campbell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1439800502.3480.70.camel@hellion.org.uk \
    --to=ijc@hellion.org.uk \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox