[U-Boot] [PATCH 3/3] armv8/gic: Fix GIC v2 initialization

[Thierry Reding <thierry.reding@gmail.com>]

From: Thierry Reding <treding@nvidia.com>

Initialize all GICD_IGROUPRn registers and set up GICC_CTLR to enable
interrupts to the primary CPU. This fixes issues seen after booting a
Linux kernel from U-Boot.

Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 arch/arm/lib/gic_64.S | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/lib/gic_64.S b/arch/arm/lib/gic_64.S
index a3e18f7713e5..62d0022408bc 100644
--- a/arch/arm/lib/gic_64.S
+++ b/arch/arm/lib/gic_64.S
@@ -46,11 +46,19 @@ ENTRY(gic_init_secure)
 	ldr	w9, [x0, GICD_TYPER]
 	and	w10, w9, #0x1f		/* ITLinesNumber */
 	cbz	w10, 1f			/* No SPIs */
-	add	x11, x0, (GICD_IGROUPRn + 4)
+	add	x11, x0, GICD_IGROUPRn
 	mov	w9, #~0			/* Config SPIs as Grp1 */
+	str	w9, [x11], #0x4
 0:	str	w9, [x11], #0x4
 	sub	w10, w10, #0x1
 	cbnz	w10, 0b
+
+	ldr	x1, =GICC_BASE		/* GICC_CTLR */
+	mov	w0, #3			/* EnableGrp0 | EnableGrp1 */
+	str	w0, [x1]
+
+	mov	w0, #1 << 7		/* allow NS access to GICC_PMR */
+	str	w0, [x1, #4]		/* GICC_PMR */
 #endif
 1:
 	ret
-- 
2.4.5