From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] ls2085ardb not booting
Date: Thu, 27 Aug 2015 16:32:34 -0500 [thread overview]
Message-ID: <1440711154.16577.166.camel@freescale.com> (raw)
I'm unable to boot ls2085ardb on the current tree. I get no console output.
v2015.07 gives some output, but hangs at:
> U-Boot 2015.07 (Aug 27 2015 - 16:24:43 -0500) LS2085A-RDB
>
> Clock Configuration:
> CPU0(A57):1600 MHz CPU1(A57):1600 MHz CPU2(A57):1600 MHz
> CPU3(A57):1600 MHz CPU4(A57):1600 MHz CPU5(A57):1600 MHz
> CPU6(A57):1600 MHz CPU7(A57):1600 MHz
> Bus: 600 MHz DDR: 1333.333 MHz DP-DDR: 1333.333 MHz
> Reset Configuration Word (RCW):
> 00: 40282830 40400040 00000000 00000000
> 10: 00000000 00200000 00200000 00000000
> 20: 00c12980 00002580 00000000 00000000
> 30: 00000e0b 00000000 00000000 00000000
> 40: 00000000 00000000 00000000 00000000
> 50: 00000000 00000000 00000000 00000000
> 60: 00000000 00000000 00027000 00000000
> 70: 412a0000 00000000 00000000 00000000
> Board: LS2085A-RDB, Board Arch: V1, Board version: C, boot from vBank: 4
> FPGA: v1.18
> SERDES1 Reference : Clock1 = 156.25MHz Clock2 = 156.25MHz
> SERDES2 Reference : Clock1 = 100MHz Clock2 = 100MHz
> I2C: ready
> DRAM: Initializing DDR....using SPD
> Detected UDIMM 18ASF1G72AZ-2G1A1
> Detected UDIMM 18ASF1G72AZ-2G1A1
> There is no rank on CS0 for controller 1.
> Controler 1 timeout, debug_2 = 2100
> Controler 1 timeout, debug_2 = 2500
> Waiting for D_INIT timeout. Memory may not work.
> DP-DDR: Detected UDIMM 18ASF1G72AZ-2G1A1
> 19.5 GiB
> DDR 15.5 GiB (DDR4, 64-bit, CL=9, ECC on)
> DDR Chip-Select Interleaving Mode: CS0+CS1
> DP-DDR 4 GiB (DDR4, 32-bit, CL=9, ECC on)
> DDR Chip-Select Interleaving Mode: CS0+CS1
The internal bringup branch does boot on the same board, with the same RCW.
-Scott
next reply other threads:[~2015-08-27 21:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-27 21:32 Scott Wood [this message]
2015-08-28 2:37 ` [U-Boot] ls2085ardb not booting York Sun
2015-09-01 0:17 ` Scott Wood
2015-09-01 1:53 ` York Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440711154.16577.166.camel@freescale.com \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox