[U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency

[Chin Liang See <clsee@altera.com>]

Fix the fdt read for spi-max-frequency as it's contained
in the child node. Current state of code is always
returning default value.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Vikas Manocha <vikas.manocha@st.com>
Cc: Jagannadh Teki <jteki@openedev.com>
Cc: Pavel Machek <pavel@denx.de>
---
 drivers/spi/cadence_qspi.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 300934e..a00af87 100644
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -291,10 +291,6 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
 	plat->regbase = (void *)data[0];
 	plat->ahbbase = (void *)data[2];
 
-	/* Use 500KHz as a suitable default */
-	plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
-				      500000);
-
 	/* All other paramters are embedded in the child node */
 	subnode = fdt_first_subnode(blob, node);
 	if (subnode < 0) {
@@ -302,6 +298,10 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
 		return -ENODEV;
 	}
 
+	/* Use 500KHz as a suitable default */
+	plat->max_hz = fdtdec_get_int(blob, subnode, "spi-max-frequency",
+				      500000);
+
 	/* Read other parameters from DT */
 	plat->page_size = fdtdec_get_int(blob, subnode, "page-size", 256);
 	plat->block_size = fdtdec_get_int(blob, subnode, "block-size", 16);
-- 
1.7.7.4