From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [Patch v2 08/16] net/fm: fix compile warnings for 64-bit platform
Date: Thu, 17 Sep 2015 13:13:44 -0500 [thread overview]
Message-ID: <1442513624.19102.55.camel@freescale.com> (raw)
In-Reply-To: <1442473613-17374-5-git-send-email-Qianyu.Gong@freescale.com>
On Thu, 2015-09-17 at 15:06 +0800, Gong Qianyu wrote:
> This patch fixes such compile warnings:
>
> drivers/net/fm/eth.c: In function 'fm_eth_recv':
> drivers/net/fm/eth.c:549:11: warning: cast to pointer from integer of
> different size [-Wint-to-pointer-cast]
> data = (u8 *)in_be32(&rxbd->buf_ptr_lo);
> drivers/net/fm/fm.c: In function 'fm_muram_alloc':
> drivers/net/fm/fm.c:52:9: warning: cast to pointer from integer of
> different size [-Wint-to-pointer-cast]
> memset((void *)ret, 0, size);
> drivers/net/fm/fm.c: In function 'fm_init_muram':
> drivers/net/fm/fm.c:59:13: warning: cast from pointer to integer of
> different size [-Wpointer-to-int-cast]
> u32 base = (u32)reg;
>
> Just make the cast explicit for them.
>
> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
> ---
> drivers/net/fm/eth.c | 31 ++++++++++++++++---------------
> drivers/net/fm/fm.c | 4 ++--
> 2 files changed, 18 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
> index 12eb9b8..6ef0afb 100644
> --- a/drivers/net/fm/eth.c
> +++ b/drivers/net/fm/eth.c
> @@ -120,12 +120,12 @@ static int tgec_is_fibre(struct eth_device *dev)
>
> static u16 muram_readw(u16 *addr)
> {
> - u32 base = (u32)addr & ~0x3;
> + ulong base = (ulong)addr & ~0x3;
This will still truncate the address at 32 bits. It needs to be ~0x3UL.
> u32 val32 = in_be32((u32 *)base);
> int byte_pos;
> u16 ret;
>
> - byte_pos = (u32)addr & 0x3;
> + byte_pos = (ulong)addr & 0x3;
> if (byte_pos)
> ret = (u16)(val32 & 0x0000ffff);
> else
> @@ -136,12 +136,12 @@ static u16 muram_readw(u16 *addr)
>
> static void muram_writew(u16 *addr, u16 val)
> {
> - u32 base = (u32)addr & ~0x3;
> + ulong base = (ulong)addr & ~0x3;
> u32 org32 = in_be32((u32 *)base);
> u32 val32;
> int byte_pos;
>
> - byte_pos = (u32)addr & 0x3;
> + byte_pos = (ulong)addr & 0x3;
> if (byte_pos)
> val32 = (org32 & 0xffff0000) | val;
> else
> @@ -217,12 +217,12 @@ static int fm_eth_rx_port_parameter_init(struct
> fm_eth *fm_eth)
> int i;
>
> /* alloc global parameter ram at MURAM */
> - pram = (struct fm_port_global_pram *)fm_muram_alloc(fm_eth->fm_index,
> - FM_PRAM_SIZE, FM_PRAM_ALIGN);
> + pram = (struct fm_port_global_pram *)(ulong)fm_muram_alloc(
> + fm_eth->fm_index, FM_PRAM_SIZE, FM_PRAM_ALIGN);
Make fm_muram_alloc() return a pointer instead. If muram were >= 4 GiB the
above would fail.
> fm_eth->rx_pram = pram;
>
> /* parameter page offset to MURAM */
> - pram_page_offset = (u32)pram - fm_muram_base(fm_eth->fm_index);
> + pram_page_offset = (u32)(ulong)pram - fm_muram_base(fm_eth->fm_index);
Get rid of the u32 cast -- again, if the muram base were above >= 4 GiB this
would fail because you're dropping the high bits before the subtraction
rather than after.
>
> /* enable global mode- snooping data buffers and BDs */
> out_be32(&pram->mode, PRAM_MODE_GLOBAL);
> @@ -258,7 +258,8 @@ static int fm_eth_rx_port_parameter_init(struct fm_eth
> *fm_eth)
> muram_writew(&rxbd->status, RxBD_EMPTY);
> muram_writew(&rxbd->len, 0);
> muram_writew(&rxbd->buf_ptr_hi, 0);
> - out_be32(&rxbd->buf_ptr_lo, (u32)rx_buf_pool + i * MAX_RXBUF_LEN);
> + out_be32(&rxbd->buf_ptr_lo, (u32)(ulong)rx_buf_pool +
> + i * MAX_RXBUF_LEN);
> rxbd++;
Use virt_to_phys() and lower_32_bits(). Is there a "hi" register to handle
the upper 32 bits?
Likewise elsewhere. Don't just apply the minimum bandage to get rid of the
warning. Make the code actually be 64-bit clean.
-Scott
next prev parent reply other threads:[~2015-09-17 18:13 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-17 7:06 [U-Boot] [Patch v2 04/16] net/fm: bug fix when CONFIG_PHYLIB not defined Gong Qianyu
2015-09-17 7:06 ` [U-Boot] [Patch v2 05/16] net: Move some header files to include/ Gong Qianyu
2015-09-17 18:06 ` Scott Wood
2015-09-17 7:06 ` [U-Boot] [Patch v2 06/16] net/fm: Add QSGMII PCS init Gong Qianyu
2015-09-17 7:06 ` [U-Boot] [Patch v2 07/16] net/fm: fix MDIO controller base on FMAN2 Gong Qianyu
2015-09-17 18:04 ` Scott Wood
2015-09-18 3:49 ` Shaohui Xie
2015-09-18 5:13 ` Scott Wood
2015-09-25 10:51 ` Hu Vincent
2015-09-17 7:06 ` [U-Boot] [Patch v2 08/16] net/fm: fix compile warnings for 64-bit platform Gong Qianyu
2015-09-17 18:13 ` Scott Wood [this message]
2015-09-25 2:22 ` Hou Zhiqiang
2015-09-25 2:33 ` Scott Wood
2015-09-25 3:49 ` Hou Zhiqiang
2015-09-17 7:06 ` [U-Boot] [Patch v2 09/16] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC Gong Qianyu
2015-09-21 17:27 ` York Sun
2015-09-25 12:28 ` Hu Vincent
2015-09-25 14:53 ` York Sun
2015-09-27 4:10 ` Kushwaha Prabhakar
2015-09-28 7:23 ` Hu Vincent
2015-09-17 7:06 ` [U-Boot] [Patch v2 10/16] ARMv8/ls1043ardb: Add LS1043ARDB board support Gong Qianyu
2015-09-21 17:27 ` York Sun
2015-09-17 7:06 ` [U-Boot] [Patch v2 11/16] armv8/ls1043ardb: Add nand boot support Gong Qianyu
2015-09-17 20:16 ` Scott Wood
2015-09-18 3:36 ` Gong Q.Y.
2015-09-18 5:14 ` Scott Wood
2015-09-17 7:06 ` [U-Boot] [Patch v2 12/16] armv8/ls1043ardb: Add cpld command to boot from nand Gong Qianyu
2015-09-21 17:27 ` York Sun
2015-09-17 7:06 ` [U-Boot] [Patch v2 13/16] armv8/ls1043a: Add Fman support Gong Qianyu
2015-09-17 7:06 ` [U-Boot] [Patch v2 14/16] armv8/ls1043ardb: esdhc: Add esdhc support for ls1043ardb Gong Qianyu
2015-09-17 7:06 ` [U-Boot] [Patch v2 15/16] armv8/ls1043ardb: Add sd boot support Gong Qianyu
2015-09-17 7:06 ` [U-Boot] [Patch v2 16/16] armv8/ls1043ardb: Add cpld command to boot from sd Gong Qianyu
2015-09-21 17:27 ` York Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442513624.19102.55.camel@freescale.com \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox