public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 10/21] sf: Move the read_id code to sf_ops
Date: Mon, 12 Oct 2015 20:31:03 +0530	[thread overview]
Message-ID: <1444662074-2424-11-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1444662074-2424-1-git-send-email-jteki@openedev.com>

read_id code is related to spi_flash stuff hence moved to sf_ops.

Signed-off-by: Jagan Teki <jteki@openedev.com>
---
Changes for v4, v3, v2:
	- none

 drivers/mtd/spi/sf_internal.h |  3 +--
 drivers/mtd/spi/sf_ops.c      | 21 ++++++++++++++++++---
 drivers/mtd/spi/sf_probe.c    | 15 +--------------
 3 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 3f07560..8216fdc 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -235,7 +235,6 @@ void spi_flash_mtd_unregister(void);
 /**
  * spi_flash_scan - scan the SPI FLASH
  * @spi:	the spi slave structure
- * @idcode:	idcode of spi flash
  * @flash:	the spi flash structure
  *
  * The drivers can use this fuction to scan the SPI FLASH.
@@ -244,6 +243,6 @@ void spi_flash_mtd_unregister(void);
  *
  * Return: 0 for success, others for failure.
  */
-int spi_flash_scan(struct spi_slave *spi, u8 *idcode, struct spi_flash *flash);
+int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash);
 
 #endif /* _SF_INTERNAL_H_ */
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index d37b0a9..016a5df 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -706,14 +706,29 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
 }
 #endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
 
-int spi_flash_scan(struct spi_slave *spi, u8 *idcode, struct spi_flash *flash)
+int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash)
 {
 	const struct spi_flash_params *params;
+	u16 jedec, ext_jedec;
+	u8 idcode[5];
 	u8 cmd;
-	u16 jedec = idcode[1] << 8 | idcode[2];
-	u16 ext_jedec = idcode[3] << 8 | idcode[4];
 	int ret;
 
+	/* Read the ID codes */
+	ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
+	if (ret) {
+		printf("SF: Failed to get idcodes\n");
+		return -EINVAL;
+	}
+
+#ifdef DEBUG
+	printf("SF: Got idcodes\n");
+	print_buffer(0, idcode, 1, sizeof(idcode), 0);
+#endif
+
+	jedec = idcode[1] << 8 | idcode[2];
+	ext_jedec = idcode[3] << 8 | idcode[4];
+
 	/* Validate params from spi_flash_params table */
 	params = spi_flash_params_table;
 	for (; params->name != NULL; params++) {
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index d2991de..a712792 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -29,7 +29,6 @@
  */
 int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash)
 {
-	u8 idcode[5];
 	int ret;
 
 	/* Setup spi_slave */
@@ -45,19 +44,7 @@ int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash)
 		return ret;
 	}
 
-	/* Read the ID codes */
-	ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
-	if (ret) {
-		printf("SF: Failed to get idcodes\n");
-		goto err_read_id;
-	}
-
-#ifdef DEBUG
-	printf("SF: Got idcodes\n");
-	print_buffer(0, idcode, 1, sizeof(idcode), 0);
-#endif
-
-	ret = spi_flash_scan(spi, idcode, flash);
+	ret = spi_flash_scan(spi, flash);
 	if (ret) {
 		ret = -EINVAL;
 		goto err_read_id;
-- 
1.9.1

  parent reply	other threads:[~2015-10-12 15:01 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-12 15:00 [U-Boot] [PATCH v4 00/21] sf: Tunning spi-flash layer Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 01/21] spi: zynq_spi: Remove unneeded headers Jagan Teki
2015-10-25  7:32   ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 02/21] sf: Return bank_sel, if flash->bank_curr == bank_sel Jagan Teki
2015-10-25  7:33   ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 03/21] sf: Add spi_flash_read_bar Jagan Teki
2015-10-25  7:35   ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 04/21] sf: Optimize BAR write code Jagan Teki
2015-10-25  7:36   ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 05/21] sf: Make flash->flags use for generic usage Jagan Teki
2015-10-25  7:38   ` Jagan Teki
2015-11-16  2:59   ` Bin Meng
2015-11-18  1:14     ` Bin Meng
2015-11-18  1:27       ` Tom Rini
2015-11-18  6:58     ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 06/21] sf: Update status reg check in spi_flash_cmd_wait_ready Jagan Teki
2015-10-25  7:39   ` Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 07/21] sf: Add FSR support to spi_flash_cmd_wait_ready Jagan Teki
2015-10-25  7:40   ` Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 08/21] sf: spi_flash_validate_params => spi_flash_scan Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 09/21] sf: Move spi_flash_scan code to sf_ops Jagan Teki
2015-10-12 15:01 ` Jagan Teki [this message]
2015-10-12 15:01 ` [U-Boot] [PATCH v4 11/21] sf: Move BAR defined code at once place Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 12/21] sf: Use static for file-scope functions Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 13/21] sf: Fix Makefile Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 14/21] sf: Use simple name for register access functions Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 15/21] sf: Use flash function pointers in dm_spi_flash_ops Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 16/21] sf: Flash power up read-only based on idcode0 Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 17/21] sf: Use static for file-scope functions Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 18/21] sf: Remove unneeded header includes Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 19/21] sf: probe: Use spi_flash_scan in dm-spi-flash Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 20/21] sf: Re-factorize spi_flash_probe_tail code Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 21/21] dm-sf: Re-factorize spi_flash_std_probe code Jagan Teki
2015-10-18 20:27 ` [U-Boot] [PATCH v4 00/21] sf: Tunning spi-flash layer Simon Glass
2015-10-19  9:28   ` Jagan Teki
2015-10-28 18:47     ` Simon Glass
2015-10-28 19:08       ` Jagan Teki
2015-10-29 23:25         ` Simon Glass
2015-10-30 20:02           ` Jagan Teki
2015-10-30 20:30             ` Marek Vasut
2015-10-30 20:33               ` Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444662074-2424-11-git-send-email-jteki@openedev.com \
    --to=jteki@openedev.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox