From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 17/21] sf: Use static for file-scope functions
Date: Mon, 12 Oct 2015 20:31:10 +0530 [thread overview]
Message-ID: <1444662074-2424-18-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1444662074-2424-1-git-send-email-jteki@openedev.com>
Use static for file-scope functions and removed them from
header files.
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
Changes for v4, v3, v2:
- none
drivers/mtd/spi/sf_internal.h | 20 --------------------
drivers/mtd/spi/sf_ops.c | 11 ++++++-----
2 files changed, 6 insertions(+), 25 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 39749c2..2873402 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -117,11 +117,6 @@ enum spi_nor_option_flags {
#ifdef CONFIG_SPI_FLASH_SST
# define CMD_SST_BP 0x02 /* Byte Program */
# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */
-
-int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf);
-int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf);
#endif
/**
@@ -166,9 +161,6 @@ int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
const void *data, size_t data_len);
-/* Flash erase(sectors) operation, support all possible erase commands */
-int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len);
-
/* Enable writing on the SPI flash */
static inline int spi_flash_cmd_write_enable(struct spi_flash *flash)
{
@@ -193,24 +185,12 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
size_t cmd_len, const void *buf, size_t buf_len);
/*
- * Flash write operation, support all possible write commands.
- * Write the requested data out breaking it up into multiple write
- * commands as needed per the write size.
- */
-int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf);
-
-/*
* Same as spi_flash_cmd_read() except it also claims/releases the SPI
* bus. Used as common part of the ->read() operation.
*/
int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
size_t cmd_len, void *data, size_t data_len);
-/* Flash read operation, support all possible read commands */
-int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
- size_t len, void *data);
-
#ifdef CONFIG_SPI_FLASH_MTD
int spi_flash_mtd_register(struct spi_flash *flash);
void spi_flash_mtd_unregister(void);
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index f90f041..e04f8aa 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -298,7 +298,8 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
return ret;
}
-int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
+static int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset,
+ size_t len)
{
u32 erase_size, erase_addr;
u8 cmd[SPI_FLASH_CMD_LEN];
@@ -341,7 +342,7 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
return ret;
}
-int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
+static int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
size_t len, const void *buf)
{
unsigned long byte_addr, page_size;
@@ -418,7 +419,7 @@ void __weak spi_flash_copy_mmap(void *data, void *offset, size_t len)
memcpy(data, offset, len);
}
-int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
+static int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
size_t len, void *data)
{
u8 *cmd, cmdsz;
@@ -510,7 +511,7 @@ static int sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf)
return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
}
-int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
+static int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
const void *buf)
{
size_t actual, cmd_len;
@@ -577,7 +578,7 @@ int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
return ret;
}
-int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
+static int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
const void *buf)
{
size_t actual;
--
1.9.1
next prev parent reply other threads:[~2015-10-12 15:01 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-12 15:00 [U-Boot] [PATCH v4 00/21] sf: Tunning spi-flash layer Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 01/21] spi: zynq_spi: Remove unneeded headers Jagan Teki
2015-10-25 7:32 ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 02/21] sf: Return bank_sel, if flash->bank_curr == bank_sel Jagan Teki
2015-10-25 7:33 ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 03/21] sf: Add spi_flash_read_bar Jagan Teki
2015-10-25 7:35 ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 04/21] sf: Optimize BAR write code Jagan Teki
2015-10-25 7:36 ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 05/21] sf: Make flash->flags use for generic usage Jagan Teki
2015-10-25 7:38 ` Jagan Teki
2015-11-16 2:59 ` Bin Meng
2015-11-18 1:14 ` Bin Meng
2015-11-18 1:27 ` Tom Rini
2015-11-18 6:58 ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 06/21] sf: Update status reg check in spi_flash_cmd_wait_ready Jagan Teki
2015-10-25 7:39 ` Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 07/21] sf: Add FSR support to spi_flash_cmd_wait_ready Jagan Teki
2015-10-25 7:40 ` Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 08/21] sf: spi_flash_validate_params => spi_flash_scan Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 09/21] sf: Move spi_flash_scan code to sf_ops Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 10/21] sf: Move the read_id " Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 11/21] sf: Move BAR defined code at once place Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 12/21] sf: Use static for file-scope functions Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 13/21] sf: Fix Makefile Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 14/21] sf: Use simple name for register access functions Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 15/21] sf: Use flash function pointers in dm_spi_flash_ops Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 16/21] sf: Flash power up read-only based on idcode0 Jagan Teki
2015-10-12 15:01 ` Jagan Teki [this message]
2015-10-12 15:01 ` [U-Boot] [PATCH v4 18/21] sf: Remove unneeded header includes Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 19/21] sf: probe: Use spi_flash_scan in dm-spi-flash Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 20/21] sf: Re-factorize spi_flash_probe_tail code Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 21/21] dm-sf: Re-factorize spi_flash_std_probe code Jagan Teki
2015-10-18 20:27 ` [U-Boot] [PATCH v4 00/21] sf: Tunning spi-flash layer Simon Glass
2015-10-19 9:28 ` Jagan Teki
2015-10-28 18:47 ` Simon Glass
2015-10-28 19:08 ` Jagan Teki
2015-10-29 23:25 ` Simon Glass
2015-10-30 20:02 ` Jagan Teki
2015-10-30 20:30 ` Marek Vasut
2015-10-30 20:33 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444662074-2424-18-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox