From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 07/21] sf: Add FSR support to spi_flash_cmd_wait_ready
Date: Mon, 12 Oct 2015 20:31:00 +0530 [thread overview]
Message-ID: <1444662074-2424-8-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1444662074-2424-1-git-send-email-jteki@openedev.com>
This patch adds flag status register reading support to
spi_flash_cmd_wait_ready.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Hou Zhiqiang <B48286@freescale.com>
Tested-by: Jagan Teki <jteki@openedev.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
---
Changes for v4, v3, v2:
- none
drivers/mtd/spi/sf_internal.h | 1 +
drivers/mtd/spi/sf_ops.c | 64 +++++++++++++++++++++++++++++++++++++++----
drivers/mtd/spi/sf_probe.c | 4 +--
include/spi_flash.h | 2 --
4 files changed, 60 insertions(+), 11 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 53998fc..8a3e5ec 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -53,6 +53,7 @@ enum {
enum spi_nor_option_flags {
SNOR_F_SST_WR = (1 << 0),
+ SNOR_F_USE_FSR = (1 << 1),
};
#define SPI_FLASH_3B_ADDR_LEN 3
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index c820d48..f2a9244 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -41,6 +41,20 @@ int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs)
return 0;
}
+static int read_fsr(struct spi_flash *flash, u8 *fsr)
+{
+ int ret;
+ const u8 cmd = CMD_FLAG_STATUS;
+
+ ret = spi_flash_read_common(flash, &cmd, 1, fsr, 1);
+ if (ret < 0) {
+ debug("SF: fail to read flag status register\n");
+ return ret;
+ }
+
+ return 0;
+}
+
int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws)
{
u8 cmd;
@@ -139,22 +153,60 @@ static void spi_flash_dual_flash(struct spi_flash *flash, u32 *addr)
}
#endif
-int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
+static int spi_flash_sr_ready(struct spi_flash *flash)
{
u8 sr;
+ int ret;
+
+ ret = spi_flash_cmd_read_status(flash, &sr);
+ if (ret < 0)
+ return ret;
+
+ return !(sr & STATUS_WIP);
+}
+
+static int spi_flash_fsr_ready(struct spi_flash *flash)
+{
+ u8 fsr;
+ int ret;
+
+ ret = read_fsr(flash, &fsr);
+ if (ret < 0)
+ return ret;
+
+ return fsr & STATUS_PEC;
+}
+
+static int spi_flash_ready(struct spi_flash *flash)
+{
+ int sr, fsr;
+
+ sr = spi_flash_sr_ready(flash);
+ if (sr < 0)
+ return sr;
+
+ fsr = 1;
+ if (flash->flags & SNOR_F_USE_FSR) {
+ fsr = spi_flash_fsr_ready(flash);
+ if (fsr < 0)
+ return fsr;
+ }
+
+ return sr && fsr;
+}
+
+int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
+{
int timebase, ret;
timebase = get_timer(0);
while (get_timer(timebase) < timeout) {
- ret = spi_flash_cmd_read_status(flash, &sr);
+ ret = spi_flash_ready(flash);
if (ret < 0)
return ret;
-
- if (!(sr & STATUS_WIP))
+ if (ret)
return 0;
- else
- break;
}
printf("SF: Timeout!\n");
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 2634e90..f591ab1 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -257,11 +257,9 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
flash->dummy_byte = 1;
}
- /* Poll cmd selection */
- flash->poll_cmd = CMD_READ_STATUS;
#ifdef CONFIG_SPI_FLASH_STMICRO
if (params->flags & E_FSR)
- flash->poll_cmd = CMD_FLAG_STATUS;
+ flash->flags |= SNOR_F_USE_FSR;
#endif
/* Configure the BAR - discover bank cmds and read current bank */
diff --git a/include/spi_flash.h b/include/spi_flash.h
index 8d85468..4312d3d 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -49,7 +49,6 @@ struct spi_slave;
* @bank_read_cmd: Bank read cmd
* @bank_write_cmd: Bank write cmd
* @bank_curr: Current flash bank
- * @poll_cmd: Poll cmd - for flash erase/program
* @erase_cmd: Erase cmd 4K, 32K, 64K
* @read_cmd: Read cmd - Array Fast, Extn read and quad read.
* @write_cmd: Write cmd - page and quad program.
@@ -82,7 +81,6 @@ struct spi_flash {
u8 bank_write_cmd;
u8 bank_curr;
#endif
- u8 poll_cmd;
u8 erase_cmd;
u8 read_cmd;
u8 write_cmd;
--
1.9.1
next prev parent reply other threads:[~2015-10-12 15:01 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-12 15:00 [U-Boot] [PATCH v4 00/21] sf: Tunning spi-flash layer Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 01/21] spi: zynq_spi: Remove unneeded headers Jagan Teki
2015-10-25 7:32 ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 02/21] sf: Return bank_sel, if flash->bank_curr == bank_sel Jagan Teki
2015-10-25 7:33 ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 03/21] sf: Add spi_flash_read_bar Jagan Teki
2015-10-25 7:35 ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 04/21] sf: Optimize BAR write code Jagan Teki
2015-10-25 7:36 ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 05/21] sf: Make flash->flags use for generic usage Jagan Teki
2015-10-25 7:38 ` Jagan Teki
2015-11-16 2:59 ` Bin Meng
2015-11-18 1:14 ` Bin Meng
2015-11-18 1:27 ` Tom Rini
2015-11-18 6:58 ` Jagan Teki
2015-10-12 15:00 ` [U-Boot] [PATCH v4 06/21] sf: Update status reg check in spi_flash_cmd_wait_ready Jagan Teki
2015-10-25 7:39 ` Jagan Teki
2015-10-12 15:01 ` Jagan Teki [this message]
2015-10-25 7:40 ` [U-Boot] [PATCH v4 07/21] sf: Add FSR support to spi_flash_cmd_wait_ready Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 08/21] sf: spi_flash_validate_params => spi_flash_scan Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 09/21] sf: Move spi_flash_scan code to sf_ops Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 10/21] sf: Move the read_id " Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 11/21] sf: Move BAR defined code at once place Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 12/21] sf: Use static for file-scope functions Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 13/21] sf: Fix Makefile Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 14/21] sf: Use simple name for register access functions Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 15/21] sf: Use flash function pointers in dm_spi_flash_ops Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 16/21] sf: Flash power up read-only based on idcode0 Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 17/21] sf: Use static for file-scope functions Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 18/21] sf: Remove unneeded header includes Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 19/21] sf: probe: Use spi_flash_scan in dm-spi-flash Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 20/21] sf: Re-factorize spi_flash_probe_tail code Jagan Teki
2015-10-12 15:01 ` [U-Boot] [PATCH v4 21/21] dm-sf: Re-factorize spi_flash_std_probe code Jagan Teki
2015-10-18 20:27 ` [U-Boot] [PATCH v4 00/21] sf: Tunning spi-flash layer Simon Glass
2015-10-19 9:28 ` Jagan Teki
2015-10-28 18:47 ` Simon Glass
2015-10-28 19:08 ` Jagan Teki
2015-10-29 23:25 ` Simon Glass
2015-10-30 20:02 ` Jagan Teki
2015-10-30 20:30 ` Marek Vasut
2015-10-30 20:33 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444662074-2424-8-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox