public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Peng Fan <Peng.Fan@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 2/3] mx7: psci: add basic psci support
Date: Tue, 20 Oct 2015 13:59:54 +0800	[thread overview]
Message-ID: <1445320795-2235-2-git-send-email-Peng.Fan@freescale.com> (raw)
In-Reply-To: <1445320795-2235-1-git-send-email-Peng.Fan@freescale.com>

1. add basic psci support for imx7 chip.
2. support cpu_on and cpu_off.
3. switch to non-secure mode when boot linux kernel.
4. set csu allow accessing all peripherial register in non-secure mode.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
---

Changes V2:
 Refine commit msg.

 arch/arm/cpu/armv7/mx7/Makefile   |  4 ++
 arch/arm/cpu/armv7/mx7/psci-mx7.c | 78 +++++++++++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx7/psci.S     | 54 +++++++++++++++++++++++++++
 arch/arm/cpu/armv7/mx7/soc.c      |  9 +++++
 4 files changed, 145 insertions(+)
 create mode 100644 arch/arm/cpu/armv7/mx7/psci-mx7.c
 create mode 100644 arch/arm/cpu/armv7/mx7/psci.S

diff --git a/arch/arm/cpu/armv7/mx7/Makefile b/arch/arm/cpu/armv7/mx7/Makefile
index e6ecef0..f25461c 100644
--- a/arch/arm/cpu/armv7/mx7/Makefile
+++ b/arch/arm/cpu/armv7/mx7/Makefile
@@ -6,3 +6,7 @@
 #
 
 obj-y	:= soc.o clock.o clock_slice.o
+
+ifdef CONFIG_ARMV7_PSCI
+obj-y  += psci.o psci-mx7.o
+endif
diff --git a/arch/arm/cpu/armv7/mx7/psci-mx7.c b/arch/arm/cpu/armv7/mx7/psci-mx7.c
new file mode 100644
index 0000000..ec9ad87
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx7/psci-mx7.c
@@ -0,0 +1,78 @@
+#include <common.h>
+#include <asm/psci.h>
+#include <asm/arch/imx-regs.h>
+
+#define __secure __attribute__((section("._secure.text")))
+
+#define GPC_CPU_PGC_SW_PDN_REQ	0xfc
+#define GPC_CPU_PGC_SW_PUP_REQ	0xf0
+#define GPC_PGC_C1		0x840
+
+#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7	0x2
+
+/* below is for i.MX7D */
+#define SRC_GPR1_MX7D		0x074
+#define SRC_A7RCR0		0x004
+#define SRC_A7RCR1		0x008
+
+#define BP_SRC_A7RCR0_A7_CORE_RESET0	0
+#define BP_SRC_A7RCR1_A7_CORE1_ENABLE	1
+
+static inline void psci_writel(u32 value, u32 reg)
+{
+	*(volatile u32 *)reg = value;
+}
+
+static inline int psci_readl(u32 reg)
+{
+	return *(volatile u32*)reg;
+}
+
+static inline void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset)
+{
+	psci_writel(enable, GPC_IPS_BASE_ADDR + offset);
+}
+
+__secure void imx_gpcv2_set_core1_power(bool pdn)
+{
+	u32 reg = pdn ? GPC_CPU_PGC_SW_PUP_REQ : GPC_CPU_PGC_SW_PDN_REQ;
+	u32 val;
+
+	imx_gpcv2_set_m_core_pgc(true, GPC_PGC_C1);
+
+	val = psci_readl(GPC_IPS_BASE_ADDR + reg);
+	val |= BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7;
+	psci_writel(val, GPC_IPS_BASE_ADDR + reg);
+
+	while ((psci_readl(GPC_IPS_BASE_ADDR + reg) &
+	       BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7) != 0)
+		;
+
+	imx_gpcv2_set_m_core_pgc(false, GPC_PGC_C1);
+}
+
+__secure void imx_enable_cpu_ca7(int cpu, bool enable)
+{
+	u32 mask, val;
+
+	mask = 1 << (BP_SRC_A7RCR1_A7_CORE1_ENABLE + cpu - 1);
+	val = psci_readl(SRC_BASE_ADDR + SRC_A7RCR1);
+	val = enable ? val | mask : val & ~mask;
+	psci_writel(val, SRC_BASE_ADDR + SRC_A7RCR1);
+}
+
+__secure int imx_cpu_on(int fn, int cpu, int pc)
+{
+	psci_writel(pc, SRC_BASE_ADDR + cpu * 8 + SRC_GPR1_MX7D);
+	imx_gpcv2_set_core1_power(true);
+	imx_enable_cpu_ca7(cpu, true);
+	return 0;
+}
+
+__secure int imx_cpu_off(int cpu)
+{
+	imx_enable_cpu_ca7(cpu, false);
+	imx_gpcv2_set_core1_power(false);
+	psci_writel(0, SRC_BASE_ADDR + cpu * 8 + SRC_GPR1_MX7D + 4);
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/mx7/psci.S b/arch/arm/cpu/armv7/mx7/psci.S
new file mode 100644
index 0000000..34c6ab3
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx7/psci.S
@@ -0,0 +1,54 @@
+#include <config.h>
+#include <linux/linkage.h>
+
+#include <asm/armv7.h>
+#include <asm/arch-armv7/generictimer.h>
+#include <asm/psci.h>
+
+	.pushsection ._secure.text, "ax"
+
+	.arch_extension sec
+
+	@ r1 = target CPU
+	@ r2 = target PC
+
+.globl	psci_arch_init
+psci_arch_init:
+	mov	r6, lr
+
+	bl	psci_get_cpu_id
+	bl	psci_get_cpu_stack_top
+	mov	sp, r0
+
+	bx	r6
+
+	@ r1 = target CPU
+	@ r2 = target PC
+
+.globl psci_cpu_on
+psci_cpu_on:
+	push	{lr}
+
+	mov	r0, r1
+	bl	psci_get_cpu_stack_top
+	str	r2, [r0]
+	dsb
+
+	ldr	r2, =psci_cpu_entry
+	bl	imx_cpu_on
+
+	pop	{pc}
+
+.globl psci_cpu_off
+psci_cpu_off:
+
+	bl	psci_cpu_off_common
+	bl	psci_get_cpu_id
+	bl	imx_cpu_off
+
+1: 	wfi
+	b 1b
+
+	.globl psci_text_end
+psci_text_end:
+	.popsection
diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c
index 2ed05ea..020731d 100644
--- a/arch/arm/cpu/armv7/mx7/soc.c
+++ b/arch/arm/cpu/armv7/mx7/soc.c
@@ -114,10 +114,19 @@ u32 __weak get_board_rev(void)
 }
 #endif
 
+/* enable all periherial can be access in nosec mode */
+static void init_csu(void)
+{
+	int i = 0;
+	for (i = 0; i < 64; i++)
+		writel(0x00FF00FF, 0x303e0000 + i * 4);
+}
+
 int arch_cpu_init(void)
 {
 	init_aips();
 
+	init_csu();
 	/* Disable PDE bit of WMCR register */
 	imx_set_wdog_powerdown(false);
 
-- 
1.8.4

  reply	other threads:[~2015-10-20  5:59 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-20  5:59 [U-Boot] [PATCH V2 1/3] arm: discard relocation entry for secure section Peng Fan
2015-10-20  5:59 ` Peng Fan [this message]
2015-10-20 10:50   ` [U-Boot] [PATCH V2 2/3] mx7: psci: add basic psci support Fabio Estevam
2015-10-20 14:05   ` Li Frank
2015-10-20 14:25     ` Albert ARIBAUD
2015-10-20 14:29       ` Li Frank
     [not found]         ` <20151020165526.1ae0c332@lilith>
     [not found]           ` <BY2PR0301MB163850B2C1169D80C249AB2782390@BY2PR0301MB1638.namprd03.prod.outlook.com>
2015-10-20 21:04             ` Albert ARIBAUD
2015-10-20 21:12               ` Li Frank
2015-10-20  5:59 ` [U-Boot] [PATCH V2 3/3] imx: mx7: default enable non-secure mode Peng Fan
2015-10-20  7:05 ` [U-Boot] [PATCH V2 1/3] arm: discard relocation entry for secure section Albert ARIBAUD
2015-10-20  7:20   ` Peng Fan
2015-10-20  7:32     ` Albert ARIBAUD
2015-10-20  7:41       ` Peng Fan
2015-10-20 12:59         ` Albert ARIBAUD
2015-10-21  9:42           ` Peng Fan
2015-10-21 11:42             ` Albert ARIBAUD
2015-10-21 12:09               ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1445320795-2235-2-git-send-email-Peng.Fan@freescale.com \
    --to=peng.fan@freescale.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox