[U-Boot] [PATCH v4 07/24] spi: designware_spi: Use BIT macro

[Jagan Teki <jteki@openedev.com>]

Replace numerical bit shift with BIT macro in designware_spi

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
 drivers/spi/designware_spi.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
index 86ee90f..7885e46 100644
--- a/drivers/spi/designware_spi.c
+++ b/drivers/spi/designware_spi.c
@@ -75,13 +75,13 @@ DECLARE_GLOBAL_DATA_PTR;
 
 /* Bit fields in SR, 7 bits */
 #define SR_MASK				0x7f		/* cover 7 bits */
-#define SR_BUSY				(1 << 0)
-#define SR_TF_NOT_FULL			(1 << 1)
-#define SR_TF_EMPT			(1 << 2)
-#define SR_RF_NOT_EMPT			(1 << 3)
-#define SR_RF_FULL			(1 << 4)
-#define SR_TX_ERR			(1 << 5)
-#define SR_DCOL				(1 << 6)
+#define SR_BUSY				BIT(0)
+#define SR_TF_NOT_FULL			BIT(1)
+#define SR_TF_EMPT			BIT(2)
+#define SR_RF_NOT_EMPT			BIT(3)
+#define SR_RF_FULL			BIT(4)
+#define SR_TX_ERR			BIT(5)
+#define SR_DCOL				BIT(6)
 
 #define RX_TIMEOUT			1000		/* timeout in ms */
 
-- 
1.9.1