[U-Boot] [PATCH v5 09/23] spi: ich: Use BIT macro

[Jagan Teki <jteki@openedev.com>]

Replace numerical bit shift with BIT macro
in ich

:%s/(1 << nr)/BIT(nr)/g
where nr = 0, 1, 2 .... 31

Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
 drivers/spi/ich.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
index be4c0a3..af327c4 100644
--- a/drivers/spi/ich.c
+++ b/drivers/spi/ich.c
@@ -692,13 +692,13 @@ static int ich_spi_probe(struct udevice *bus)
 	 */
 	if (plat->use_sbase) {
 		bios_cntl = ich_readb(priv, priv->bcr);
-		bios_cntl &= ~(1 << 5);	/* clear Enable InSMM_STS (EISS) */
+		bios_cntl &= ~BIT(5);	/* clear Enable InSMM_STS (EISS) */
 		bios_cntl |= 1;		/* Write Protect Disable (WPD) */
 		ich_writeb(priv, bios_cntl, priv->bcr);
 	} else {
 		pci_read_config_byte(plat->dev, 0xdc, &bios_cntl);
 		if (plat->ich_version == 9)
-			bios_cntl &= ~(1 << 5);
+			bios_cntl &= ~BIT(5);
 		pci_write_config_byte(plat->dev, 0xdc, bios_cntl | 0x1);
 	}
 
-- 
1.9.1