From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 22/23] spi: tegra: Use GENMASK
Date: Sat, 24 Oct 2015 09:09:09 +0530 [thread overview]
Message-ID: <1445657950-7117-23-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1445657950-7117-1-git-send-email-jteki@openedev.com>
Replace numeric mask hexcodes with GENMASK macro
in tegra*.c
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tom Warren <twarren@nvidia.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
drivers/spi/tegra114_spi.c | 12 ++++++------
drivers/spi/tegra20_sflash.c | 2 +-
drivers/spi/tegra20_slink.c | 4 ++--
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/spi/tegra114_spi.c b/drivers/spi/tegra114_spi.c
index d9edd11..98a062c 100644
--- a/drivers/spi/tegra114_spi.c
+++ b/drivers/spi/tegra114_spi.c
@@ -35,9 +35,9 @@ DECLARE_GLOBAL_DATA_PTR;
/* COMMAND1 */
#define SPI_CMD1_GO BIT(31)
#define SPI_CMD1_M_S BIT(30)
-#define SPI_CMD1_MODE_MASK 0x3
+#define SPI_CMD1_MODE_MASK GENMASK(1, 0)
#define SPI_CMD1_MODE_SHIFT 28
-#define SPI_CMD1_CS_SEL_MASK 0x3
+#define SPI_CMD1_CS_SEL_MASK GENMASK(1, 0)
#define SPI_CMD1_CS_SEL_SHIFT 26
#define SPI_CMD1_CS_POL_INACTIVE3 BIT(25)
#define SPI_CMD1_CS_POL_INACTIVE2 BIT(24)
@@ -45,7 +45,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define SPI_CMD1_CS_POL_INACTIVE0 BIT(22)
#define SPI_CMD1_CS_SW_HW BIT(21)
#define SPI_CMD1_CS_SW_VAL BIT(20)
-#define SPI_CMD1_IDLE_SDA_MASK 0x3
+#define SPI_CMD1_IDLE_SDA_MASK GENMASK(1, 0)
#define SPI_CMD1_IDLE_SDA_SHIFT 18
#define SPI_CMD1_BIDIR BIT(17)
#define SPI_CMD1_LSBI_FE BIT(16)
@@ -55,14 +55,14 @@ DECLARE_GLOBAL_DATA_PTR;
#define SPI_CMD1_RX_EN BIT(12)
#define SPI_CMD1_TX_EN BIT(11)
#define SPI_CMD1_PACKED BIT(5)
-#define SPI_CMD1_BIT_LEN_MASK 0x1F
+#define SPI_CMD1_BIT_LEN_MASK GENMASK(4, 0)
#define SPI_CMD1_BIT_LEN_SHIFT 0
/* COMMAND2 */
#define SPI_CMD2_TX_CLK_TAP_DELAY BIT(6)
-#define SPI_CMD2_TX_CLK_TAP_DELAY_MASK (0x3F << 6)
+#define SPI_CMD2_TX_CLK_TAP_DELAY_MASK GENMASK(11, 6)
#define SPI_CMD2_RX_CLK_TAP_DELAY BIT(0)
-#define SPI_CMD2_RX_CLK_TAP_DELAY_MASK (0x3F << 0)
+#define SPI_CMD2_RX_CLK_TAP_DELAY_MASK GENMASK(5, 0)
/* TRANSFER STATUS */
#define SPI_XFER_STS_RDY BIT(30)
diff --git a/drivers/spi/tegra20_sflash.c b/drivers/spi/tegra20_sflash.c
index 5dc196b..6888a96 100644
--- a/drivers/spi/tegra20_sflash.c
+++ b/drivers/spi/tegra20_sflash.c
@@ -37,7 +37,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define SPI_CMD_CS1_EN BIT(6)
#define SPI_CMD_CS0_EN BIT(5)
#define SPI_CMD_BIT_LENGTH BIT(4)
-#define SPI_CMD_BIT_LENGTH_MASK 0x0000001F
+#define SPI_CMD_BIT_LENGTH_MASK GENMASK(4, 0)
#define SPI_STAT_BSY BIT(31)
#define SPI_STAT_RDY BIT(30)
diff --git a/drivers/spi/tegra20_slink.c b/drivers/spi/tegra20_slink.c
index d1abac2..43054f1 100644
--- a/drivers/spi/tegra20_slink.c
+++ b/drivers/spi/tegra20_slink.c
@@ -46,13 +46,13 @@ DECLARE_GLOBAL_DATA_PTR;
#define SLINK_CMD_CS_VAL BIT(12)
#define SLINK_CMD_CS_SOFT BIT(11)
#define SLINK_CMD_BIT_LENGTH BIT(4)
-#define SLINK_CMD_BIT_LENGTH_MASK 0x0000001F
+#define SLINK_CMD_BIT_LENGTH_MASK GENMASK(4, 0)
/* COMMAND2 */
#define SLINK_CMD2_TXEN BIT(30)
#define SLINK_CMD2_RXEN BIT(31)
#define SLINK_CMD2_SS_EN BIT(18)
#define SLINK_CMD2_SS_EN_SHIFT 18
-#define SLINK_CMD2_SS_EN_MASK 0x000C0000
+#define SLINK_CMD2_SS_EN_MASK GENMASK(19, 18)
#define SLINK_CMD2_CS_ACTIVE_BETWEEN BIT(17)
/* STATUS */
#define SLINK_STAT_BSY BIT(31)
--
1.9.1
next prev parent reply other threads:[~2015-10-24 3:39 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-24 3:38 [U-Boot] [PATCH v5 00/23] spi: Use BIT and GENMASK Jagan Teki
2015-10-24 3:38 ` [U-Boot] [PATCH v5 01/23] spi: zynq_[q]spi: Use BIT macro Jagan Teki
2015-10-26 4:45 ` Siva Durga Prasad Paladugu
2015-10-24 3:38 ` [U-Boot] [PATCH v5 02/23] spi: zynq_[q]spi: Use GENMASK macro Jagan Teki
2015-10-26 4:45 ` Siva Durga Prasad Paladugu
2015-10-24 3:38 ` [U-Boot] [PATCH v5 03/23] spi: altera_spi: Use BIT macro Jagan Teki
2015-10-27 2:45 ` Thomas Chou
2015-10-24 3:38 ` [U-Boot] [PATCH v5 04/23] spi: atmel_spi: " Jagan Teki
2015-10-24 3:38 ` [U-Boot] [PATCH v5 05/23] spi: bfin_spi6xx: " Jagan Teki
2015-10-24 3:38 ` [U-Boot] [PATCH v5 06/23] spi: cadence_qspi_apb: " Jagan Teki
2015-10-24 3:38 ` [U-Boot] [PATCH v5 07/23] spi: designware_spi: " Jagan Teki
2015-10-24 23:24 ` Tom Rini
2015-10-24 3:38 ` [U-Boot] [PATCH v5 08/23] spi: fsl: " Jagan Teki
2015-10-24 3:38 ` [U-Boot] [PATCH v5 09/23] spi: ich: " Jagan Teki
2015-10-26 14:08 ` Simon Glass
2015-10-24 3:38 ` [U-Boot] [PATCH v5 10/23] spi: mpc8xxx_spi: " Jagan Teki
2015-10-24 3:38 ` [U-Boot] [PATCH v5 11/23] spi: omap3_spi: " Jagan Teki
2015-10-24 3:38 ` [U-Boot] [PATCH v5 12/23] spi: sh_qspi: " Jagan Teki
2015-10-24 3:39 ` [U-Boot] [PATCH v5 13/23] spi: tegra: " Jagan Teki
2015-10-24 3:39 ` [U-Boot] [PATCH v5 14/23] spi: ti_qspi: " Jagan Teki
2015-10-26 10:59 ` Vignesh R
2015-10-24 3:39 ` [U-Boot] [PATCH v5 15/23] spi: xilinx_spi: " Jagan Teki
2015-10-24 3:39 ` [U-Boot] [PATCH v5 16/23] spi: atmel_spi: Use GENMASK Jagan Teki
2015-10-24 3:39 ` [U-Boot] [PATCH v5 17/23] spi: cadence_qspi_apb: " Jagan Teki
2015-10-24 12:41 ` Marek Vasut
2015-10-24 21:51 ` Tom Rini
2015-10-24 22:13 ` Marek Vasut
2015-10-24 22:25 ` Tom Rini
2015-10-24 23:02 ` Marek Vasut
2015-10-26 5:54 ` Stefan Roese
2015-10-26 7:21 ` Jagan Teki
2015-10-26 7:29 ` Stefan Roese
2015-10-26 7:39 ` Jagan Teki
2015-10-24 3:39 ` [U-Boot] [PATCH v5 18/23] spi: designware_spi: " Jagan Teki
2015-10-24 3:39 ` [U-Boot] [PATCH v5 19/23] spi: fsl_qspi: " Jagan Teki
2015-10-24 3:39 ` [U-Boot] [PATCH v5 20/23] spi: mxs_spi: " Jagan Teki
2015-10-24 12:40 ` Marek Vasut
2015-10-24 13:42 ` Jagan Teki
2015-10-24 13:48 ` Marek Vasut
2015-10-24 21:49 ` Tom Rini
2015-10-24 22:12 ` Marek Vasut
2015-10-24 22:26 ` Tom Rini
2015-10-24 3:39 ` [U-Boot] [PATCH v5 21/23] spi: omap3_spi: " Jagan Teki
2015-10-24 3:39 ` Jagan Teki [this message]
2015-10-24 3:39 ` [U-Boot] [PATCH v5 23/23] spi: xilinx_spi: " Jagan Teki
2015-10-25 6:59 ` [U-Boot] [PATCH v5 00/23] spi: Use BIT and GENMASK Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445657950-7117-23-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox