From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 13/14] sf: Re-factorize spi_flash_probe_tail code
Date: Wed, 28 Oct 2015 00:07:55 +0530 [thread overview]
Message-ID: <1445971076-17270-13-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1445971076-17270-1-git-send-email-jteki@openedev.com>
spi_flash_probe_tail code looks not in proper shape
to add more functionalities. hence refactorized
so-that it's more readable and hence we may extend
more functionalies to it.
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
drivers/mtd/spi/sf_internal.h | 3 +-
drivers/mtd/spi/sf_ops.c | 7 ++---
drivers/mtd/spi/sf_probe.c | 72 +++++++++++++++++--------------------------
3 files changed, 33 insertions(+), 49 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 2873402..d74bc18 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -198,7 +198,6 @@ void spi_flash_mtd_unregister(void);
/**
* spi_flash_scan - scan the SPI FLASH
- * @spi: the spi slave structure
* @flash: the spi flash structure
*
* The drivers can use this fuction to scan the SPI FLASH.
@@ -207,6 +206,6 @@ void spi_flash_mtd_unregister(void);
*
* Return: 0 for success, others for failure.
*/
-int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash);
+int spi_flash_scan(struct spi_flash *flash);
#endif /* _SF_INTERNAL_H_ */
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index d3e8a83..703099f 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -703,7 +703,7 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
}
#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
-int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash)
+int spi_flash_scan(struct spi_flash *flash)
{
const struct spi_flash_params *params;
u16 jedec, ext_jedec;
@@ -712,7 +712,7 @@ int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash)
int ret;
/* Read the ID codes */
- ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
+ ret = spi_flash_cmd(flash->spi, CMD_READ_ID, idcode, sizeof(idcode));
if (ret) {
printf("SF: Failed to get idcodes\n");
return -EINVAL;
@@ -753,9 +753,8 @@ int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash)
write_sr(flash, 0);
/* Assign spi data */
- flash->spi = spi;
flash->name = params->name;
- flash->memory_map = spi->memory_map;
+ flash->memory_map = flash->spi->memory_map;
flash->dual_flash = flash->spi->option;
/* Assign spi_flash ops */
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 6ce82a7..319b7e6 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -17,49 +17,11 @@
#include "sf_internal.h"
-/**
- * spi_flash_probe_slave() - Probe for a SPI flash device on a bus
- *
- * @spi: Bus to probe
- * @flashp: Pointer to place to put flash info, which may be NULL if the
- * space should be allocated
- */
-int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash)
-{
- int ret;
-
- /* Setup spi_slave */
- if (!spi) {
- printf("SF: Failed to set up slave\n");
- return -ENODEV;
- }
-
- /* Claim spi bus */
- ret = spi_claim_bus(spi);
- if (ret) {
- debug("SF: Failed to claim SPI bus: %d\n", ret);
- return ret;
- }
-
- ret = spi_flash_scan(spi, flash);
- if (ret) {
- ret = -EINVAL;
- goto err_read_id;
- }
-
-#ifdef CONFIG_SPI_FLASH_MTD
- ret = spi_flash_mtd_register(flash);
-#endif
-
-err_read_id:
- spi_release_bus(spi);
- return ret;
-}
-
#ifndef CONFIG_DM_SPI_FLASH
struct spi_flash *spi_flash_probe_tail(struct spi_slave *bus)
{
struct spi_flash *flash;
+ int ret;
/* Allocate space if needed (not used by sf-uclass */
flash = calloc(1, sizeof(*flash));
@@ -68,13 +30,37 @@ struct spi_flash *spi_flash_probe_tail(struct spi_slave *bus)
return NULL;
}
- if (spi_flash_probe_slave(bus, flash)) {
- spi_free_slave(bus);
- free(flash);
- return NULL;
+ flash->spi = bus;
+
+ /* Claim spi bus */
+ ret = spi_claim_bus(bus);
+ if (ret) {
+ debug("SF: Failed to claim SPI bus: %d\n", ret);
+ goto err_claim;
}
+ ret = spi_flash_scan(flash);
+ if (ret)
+ goto err_scan;
+
+#ifdef CONFIG_SPI_FLASH_MTD
+ ret = spi_flash_mtd_register(flash);
+ if (ret) {
+ printf("SF: failed to register mtd device: %d\n", ret);
+ goto err_mtd;
+ }
+#endif
return flash;
+
+#ifdef CONFIG_SPI_FLASH_MTD
+err_mtd:
+ spi_free_slave(bus);
+#endif
+err_scan:
+ spi_release_bus(bus);
+err_claim:
+ free(flash);
+ return NULL;
}
struct spi_flash *spi_flash_probe(unsigned int busnum, unsigned int cs,
--
1.9.1
next prev parent reply other threads:[~2015-10-27 18:37 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-27 18:37 [U-Boot] [PATCH v5 01/14] sf: spi_flash_validate_params => spi_flash_scan Jagan Teki
2015-10-27 18:37 ` [U-Boot] [PATCH v5 02/14] sf: Move spi_flash_scan code to sf_ops Jagan Teki
2015-10-27 18:37 ` [U-Boot] [PATCH v5 03/14] sf: Move read_id " Jagan Teki
2015-10-27 18:37 ` [U-Boot] [PATCH v5 04/14] sf: probe: Code cleanup Jagan Teki
2015-10-27 18:37 ` [U-Boot] [PATCH v5 05/14] sf: Use static for file-scope functions Jagan Teki
2015-10-27 18:37 ` [U-Boot] [PATCH v5 06/14] sf: Fix Makefile Jagan Teki
2015-10-27 18:37 ` [U-Boot] [PATCH v5 07/14] sf: Use simple name for register access functions Jagan Teki
2015-10-27 18:37 ` [U-Boot] [PATCH v5 08/14] sf: Use flash function pointers in dm_spi_flash_ops Jagan Teki
2015-10-27 18:37 ` [U-Boot] [PATCH v5 09/14] sf: Flash power up read-only based on idcode0 Jagan Teki
2015-10-27 18:37 ` [U-Boot] [PATCH v5 10/14] sf: Use static for file-scope functions Jagan Teki
2015-10-27 18:37 ` [U-Boot] [PATCH v5 11/14] sf: Remove unneeded header includes Jagan Teki
2015-10-27 18:37 ` [U-Boot] [PATCH v5 12/14] sf: probe: Use spi_flash_scan in dm-spi-flash Jagan Teki
2015-10-27 18:37 ` Jagan Teki [this message]
2015-10-27 18:37 ` [U-Boot] [PATCH v5 14/14] dm-sf: Re-factorize spi_flash_std_probe code Jagan Teki
2015-10-27 19:20 ` Troy Kisky
2015-10-28 5:18 ` Jagan Teki
2015-10-28 5:31 ` Bin Meng
2015-10-28 6:37 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445971076-17270-13-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox