From: dinguyen at opensource.altera.com <dinguyen@opensource.altera.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 00/10] ARM: socfpga: Add minimal support for Arria10
Date: Thu, 19 Nov 2015 15:35:37 -0600 [thread overview]
Message-ID: <1447968947-8395-1-git-send-email-dinguyen@opensource.altera.com> (raw)
From: Dinh Nguyen <dinguyen@opensource.altera.com>
Hi,
This patchset adds the foundation support for Arria10. The series builds for
the Altera Arria10 SoCDK, but is not entirely functional on the hardware yet.
This series really just add the defines, build and Kconfig layout for Arria10.
There are few TODO after this series:
- Add DTS file for the devkit
- Add clock manager
- The Arria10 Pin Mux requires the FPGA to get programmed before the SDRAM
controller can be usable. So another patch is needed to make use of the fpga
manager to program the FPGA within the limited size of the OCRAM.
Thanks,
Dinh
Dinh Nguyen (10):
ARM: socfpga: arria10: add base address map for Arria10
ARM: socfpga: arria10: add system manager defines
ARM: socfpga: arria10: add reset manager for Arria10
ARM: socfpga: arria10: add stub sdram init for Arria10
ARM: socfpga: arria10: add misc functions for Arria10
ARM: socfpga: arria10: add socfpga_arria10_socdk config
ARM: socfpga: arria10: add board files for the Arria10 SoCDK
ARM: socfpga: arria10: add socfpga_arria10_defconfig
ARM: socfpga: arria10: add config option build for arria10
ARM: socfpga: arria10: add support for building Arria10
arch/arm/Kconfig | 4 +-
arch/arm/mach-socfpga/Kconfig | 10 +
arch/arm/mach-socfpga/Makefile | 7 +-
arch/arm/mach-socfpga/arria10/Makefile | 7 +
arch/arm/mach-socfpga/arria10/misc_a10.c | 138 ++++++++
arch/arm/mach-socfpga/arria10/reset_manager_a10.c | 83 +++++
arch/arm/mach-socfpga/arria10/sdram_a10.c | 15 +
.../mach-socfpga/include/mach/reset_manager_a10.h | 162 +++++++++
arch/arm/mach-socfpga/include/mach/sdram_a10.h | 371 +++++++++++++++++++++
.../include/mach/socfpga_a10_base_addrs.h | 45 +++
.../mach-socfpga/include/mach/system_manager_a10.h | 157 +++++++++
board/altera/arria10-socdk/Kconfig | 18 +
board/altera/arria10-socdk/Makefile | 9 +
board/altera/arria10-socdk/socfpga.c | 24 ++
configs/socfpga_arria10_defconfig | 11 +
include/configs/socfpga_arria10_socdk.h | 292 ++++++++++++++++
16 files changed, 1349 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/mach-socfpga/arria10/Makefile
create mode 100644 arch/arm/mach-socfpga/arria10/misc_a10.c
create mode 100644 arch/arm/mach-socfpga/arria10/reset_manager_a10.c
create mode 100644 arch/arm/mach-socfpga/arria10/sdram_a10.c
create mode 100644 arch/arm/mach-socfpga/include/mach/reset_manager_a10.h
create mode 100644 arch/arm/mach-socfpga/include/mach/sdram_a10.h
create mode 100644 arch/arm/mach-socfpga/include/mach/socfpga_a10_base_addrs.h
create mode 100644 arch/arm/mach-socfpga/include/mach/system_manager_a10.h
create mode 100644 board/altera/arria10-socdk/Kconfig
create mode 100644 board/altera/arria10-socdk/Makefile
create mode 100644 board/altera/arria10-socdk/socfpga.c
create mode 100644 configs/socfpga_arria10_defconfig
create mode 100644 include/configs/socfpga_arria10_socdk.h
--
2.6.2
next reply other threads:[~2015-11-19 21:35 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-19 21:35 dinguyen at opensource.altera.com [this message]
2015-11-19 21:35 ` [U-Boot] [PATCH 01/10] ARM: socfpga: arria10: add base address map for Arria10 dinguyen at opensource.altera.com
2015-11-19 22:26 ` Marek Vasut
2015-11-23 23:16 ` Dinh Nguyen
2015-11-19 21:35 ` [U-Boot] [PATCH 02/10] ARM: socfpga: arria10: add system manager defines dinguyen at opensource.altera.com
2015-11-19 22:27 ` Marek Vasut
2015-11-19 21:35 ` [U-Boot] [PATCH 03/10] ARM: socfpga: arria10: add reset manager for Arria10 dinguyen at opensource.altera.com
2015-11-19 22:35 ` Marek Vasut
2015-11-19 21:35 ` [U-Boot] [PATCH 04/10] ARM: socfpga: arria10: add stub sdram init " dinguyen at opensource.altera.com
2015-11-23 12:25 ` Pavel Machek
2015-11-23 12:57 ` Marek Vasut
2015-11-19 21:35 ` [U-Boot] [PATCH 05/10] ARM: socfpga: arria10: add misc functions " dinguyen at opensource.altera.com
2015-11-19 22:37 ` Marek Vasut
2015-11-19 21:35 ` [U-Boot] [PATCH 06/10] ARM: socfpga: arria10: add socfpga_arria10_socdk config dinguyen at opensource.altera.com
2015-11-19 22:43 ` Marek Vasut
2015-11-19 21:35 ` [U-Boot] [PATCH 07/10] ARM: socfpga: arria10: add board files for the Arria10 SoCDK dinguyen at opensource.altera.com
2015-11-23 12:43 ` Pavel Machek
2015-11-19 21:35 ` [U-Boot] [PATCH 08/10] ARM: socfpga: arria10: add socfpga_arria10_defconfig dinguyen at opensource.altera.com
2015-11-19 21:35 ` [U-Boot] [PATCH 09/10] ARM: socfpga: arria10: add config option build for arria10 dinguyen at opensource.altera.com
2015-11-19 21:35 ` [U-Boot] [PATCH 10/10] ARM: socfpga: arria10: add support for building Arria10 dinguyen at opensource.altera.com
2015-11-19 22:45 ` Marek Vasut
2015-11-19 23:28 ` Dinh Nguyen
2015-11-20 12:49 ` Marek Vasut
2015-11-23 14:36 ` Dinh Nguyen
2015-11-23 15:38 ` Marek Vasut
2015-11-23 22:32 ` Dinh Nguyen
2015-11-23 22:46 ` Marek Vasut
2015-11-23 22:50 ` Dinh Nguyen
2015-11-23 23:03 ` Marek Vasut
2015-11-23 23:04 ` Dinh Nguyen
2015-11-23 23:20 ` Marek Vasut
2015-11-23 23:25 ` Dinh Nguyen
2015-11-24 3:17 ` Chin Liang See
2015-11-24 9:31 ` Marek Vasut
2015-11-24 12:29 ` Heiko Schocher
2015-11-24 9:33 ` Chin Liang See
2015-11-24 13:22 ` Chin Liang See
2015-11-24 13:31 ` Pavel Machek
2015-11-24 13:36 ` Chin Liang See
2015-11-24 13:52 ` Marek Vasut
2015-11-24 14:01 ` Pavel Machek
2015-11-24 15:09 ` Marek Vasut
2015-11-24 13:34 ` Chin Liang See
2015-11-24 13:53 ` Marek Vasut
2015-11-23 12:51 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447968947-8395-1-git-send-email-dinguyen@opensource.altera.com \
--to=dinguyen@opensource.altera.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox