public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] usb: add support for generic EHCI devices
Date: Fri, 20 Nov 2015 20:28:56 +0000	[thread overview]
Message-ID: <1448051336.2964.1.camel@synopsys.com> (raw)
In-Reply-To: <1447860381-2645-1-git-send-email-abrodkin@synopsys.com>

Hi Simon, Marek,

On Wed, 2015-11-18 at 18:26 +0300, Alexey Brodkin wrote:
> This driver is meant to be used with any EHCI-compatible host
> controller in case if there's no need for platform-specific
> glue such as setup of controller or PHY's power mode via
> GPIOs etc.
> 
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Reviewed-by: Marek Vasut <marex@denx.de>
> Cc: Stephen Warren <swarren@nvidia.com>
> ---
> 
> Changes compared to v1:
>  * Updated commit message with removal of Synopsys board mention
>  * Cleaned-up ehci_usb_remove()
> 
>  drivers/usb/host/Kconfig        |  7 ++++++
>  drivers/usb/host/Makefile       |  1 +
>  drivers/usb/host/ehci-generic.c | 51 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 59 insertions(+)
>  create mode 100644 drivers/usb/host/ehci-generic.c
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 2a2bffe..a500578 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -73,4 +73,11 @@ config USB_EHCI_UNIPHIER
>  	---help---
>  	  Enables support for the on-chip EHCI controller on UniPhier SoCs.
>  
> +config USB_EHCI_GENERIC
> +	bool "Support for generic EHCI USB controller"
> +	depends on OF_CONTROL
> +	default y
> +	---help---
> +	  Enables support for generic EHCI controller.
> +
>  endif
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index f70f38c..b9b4471 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -32,6 +32,7 @@ else
>  obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
>  endif
>  obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
> +obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o
>  obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
>  obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
>  obj-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
> diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c
> new file mode 100644
> index 0000000..f0e2b85
> --- /dev/null
> +++ b/drivers/usb/host/ehci-generic.c
> @@ -0,0 +1,51 @@
> +/*
> + * Copyright (C) 2015 Alexey Brodkin <abrodkin@synopsys.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include "ehci.h"
> +
> +/*
> + * Even though here we don't explicitly use "struct ehci_ctrl"
> + * ehci_register() expects it to be the first thing that resides in
> + * device's private data.
> + */
> +struct generic_ehci {
> +	struct ehci_ctrl ctrl;
> +};
> +
> +static int ehci_usb_probe(struct udevice *dev)
> +{
> +	struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev);
> +	struct ehci_hcor *hcor;
> +
> +	hcor = (struct ehci_hcor *)((uint32_t)hccr +
> +				    HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> +	return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST);
> +}
> +
> +static int ehci_usb_remove(struct udevice *dev)
> +{
> +	return ehci_deregister(dev);
> +}
> +
> +static const struct udevice_id ehci_usb_ids[] = {
> +	{ .compatible = "generic-ehci" },
> +	{ }
> +};
> +
> +U_BOOT_DRIVER(usb_ehci) = {
> +	.name	= "ehci_generic",
> +	.id	= UCLASS_USB,
> +	.of_match = ehci_usb_ids,
> +	.probe = ehci_usb_probe,
> +	.remove = ehci_usb_remove,
> +	.ops	= &ehci_usb_ops,
> +	.priv_auto_alloc_size = sizeof(struct generic_ehci),
> +	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
> +};
> +

Any comments on that one or there's a chance it could be applied?

-Alexey

  reply	other threads:[~2015-11-20 20:28 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-18 15:26 [U-Boot] [PATCH v2] usb: add support for generic EHCI devices Alexey Brodkin
2015-11-20 20:28 ` Alexey Brodkin [this message]
2015-11-20 20:38 ` Simon Glass
2015-11-20 20:47   ` Marek Vasut
2015-11-20 20:48 ` Marek Vasut
2015-11-20 21:28   ` Alexey Brodkin
2015-11-20 22:32     ` Marek Vasut
2015-11-30 11:10   ` Alexey Brodkin
2015-11-30 12:34     ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1448051336.2964.1.camel@synopsys.com \
    --to=alexey.brodkin@synopsys.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox