[U-Boot] [PATCH v1] arm: socfpga: Enable load zImage and Linux DTB from USB

[Chin Liang See <clsee@altera.com>]

Hi Marek,

On Thu, 2015-11-26 at 12:04 +0100, Marek Vasut wrote:
> On Thursday, November 26, 2015 at 07:14:56 AM, Stefan Roese wrote:
> > On 26.11.2015 04:17, Chin Liang See wrote:
> > > Adding new environment usbload which will load zImage and
> > > Linux DTB from USB mass storage through FAT file system.
> > > 
> > > Signed-off-by: Chin Liang See <clsee@altera.com>
> > > Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> > > Cc: Dinh Nguyen <dinh.linux@gmail.com>
> > > Cc: Pavel Machek <pavel@denx.de>
> > > Cc: Marek Vasut <marex@denx.de>
> > > Cc: Stefan Roese <sr@denx.de>
> > > ---
> > > 
> > >   include/configs/socfpga_arria5_socdk.h   | 5 ++++-
> > >   include/configs/socfpga_cyclone5_socdk.h | 5 ++++-
> > >   2 files changed, 8 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/include/configs/socfpga_arria5_socdk.h
> > > b/include/configs/socfpga_arria5_socdk.h index 0506336..f488b00
> > > 100644
> > > --- a/include/configs/socfpga_arria5_socdk.h
> > > +++ b/include/configs/socfpga_arria5_socdk.h
> > > @@ -100,7 +100,10 @@
> > > 
> > >   		"sf read ${fdt_addr} ${qspifdtaddr}
> > > ${fdtimagesize};\0" \
> > >   	
> > >   	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
> > >   	
> > >   		" root=${qspiroot} rw
> > > rootfstype=${qspirootfstype};"\
> > > 
> > > -		"bootm ${loadaddr} - ${fdt_addr}\0"
> > > +		"bootm ${loadaddr} - ${fdt_addr}\0" \
> > > +	"usbload=usb reset;" \
> > > +		"fatload usb 0 ${loadaddr} ${bootimage};" \
> > > +		"fatload usb 0 ${fdt_addr} ${fdtimage}\0"
> > > 
> > >   /* The rest of the configuration is shared */
> > >   #include <configs/socfpga_common.h>
> > > 
> > > diff --git a/include/configs/socfpga_cyclone5_socdk.h
> > > b/include/configs/socfpga_cyclone5_socdk.h index d7369ee..40a4f08
> > > 100644
> > > --- a/include/configs/socfpga_cyclone5_socdk.h
> > > +++ b/include/configs/socfpga_cyclone5_socdk.h
> > > @@ -100,7 +100,10 @@
> > > 
> > >   		"sf read ${fdt_addr} ${qspifdtaddr}
> > > ${fdtimagesize};\0" \
> > >   	
> > >   	"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
> > >   	
> > >   		" root=${qspiroot} rw
> > > rootfstype=${qspirootfstype};"\
> > > 
> > > -		"bootm ${loadaddr} - ${fdt_addr}\0"
> > > +		"bootm ${loadaddr} - ${fdt_addr}\0" \
> > > +	"usbload=usb reset;" \
> > > +		"fatload usb 0 ${loadaddr} ${bootimage};" \
> > > +		"fatload usb 0 ${fdt_addr} ${fdtimage}\0"
> > 
> > Again, please use the generic FS commands here, e.g. "load" instead
> > of "fatload".
> > 
> > And doesn't it make sense to consolidate these common, identical
> > commands into a common file (socfpga_common.h)?
> 
> Even better -- why not switch to distro_bootcmd and/or update it to
> support
> booting from USB (it probably already does).

Thanks for sharing this. I presume we need a script to store the boot
command? Let me read more on this.

Thanks
Chin Liang

> 
> Best regards,
> Marek Vasut