[U-Boot] [PATCH v8 10/14] sf: Remove unneeded SST_BP and SST_WP

[Jagan Teki <jteki@openedev.com>]

SST parts added on sf_params.c supports both SST_WR which consits
of both BP and WP and there is a spi controller ich which supports
only BP so the relevent _write hook set based on "slave->op_mode_tx"
hence there is no respective change required from flash side hance
removed these.

Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
 drivers/mtd/spi/sf_internal.h | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index b8692c6..16dd45b 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -44,13 +44,10 @@ enum {
 #endif
 	SECT_32K	= 1 << 1,
 	E_FSR		= 1 << 2,
-	SST_BP		= 1 << 3,
-	SST_WP		= 1 << 4,
-	WR_QPP		= 1 << 5,
+	SST_WR		= 1 << 3,
+	WR_QPP		= 1 << 4,
 };
 
-#define SST_WR		(SST_BP | SST_WP)
-
 enum spi_nor_option_flags {
 	SNOR_F_SST_WR		= (1 << 0),
 	SNOR_F_USE_FSR		= (1 << 1),
-- 
1.9.1