From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v8 07/14] sf: Use simple name for register access functions
Date: Mon, 7 Dec 2015 00:04:19 +0530 [thread overview]
Message-ID: <1449426866-696-8-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1449426866-696-1-git-send-email-jteki@openedev.com>
Most of the register access function are static,
so used simple name to represent each.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
drivers/mtd/spi/sf_ops.c | 52 ++++++++++++++++++++++++------------------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index 23a6adb..853759e 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -40,7 +40,7 @@ static u8 spi_read_cmds_array[] = {
CMD_READ_QUAD_IO_FAST,
};
-static int spi_flash_cmd_read_status(struct spi_flash *flash, u8 *rs)
+static int read_sr(struct spi_flash *flash, u8 *rs)
{
int ret;
u8 cmd;
@@ -69,7 +69,7 @@ static int read_fsr(struct spi_flash *flash, u8 *fsr)
return 0;
}
-static int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws)
+static int write_sr(struct spi_flash *flash, u8 ws)
{
u8 cmd;
int ret;
@@ -85,7 +85,7 @@ static int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws)
}
#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
-static int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc)
+static int read_cr(struct spi_flash *flash, u8 *rc)
{
int ret;
u8 cmd;
@@ -100,13 +100,13 @@ static int spi_flash_cmd_read_config(struct spi_flash *flash, u8 *rc)
return 0;
}
-static int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc)
+static int write_cr(struct spi_flash *flash, u8 wc)
{
u8 data[2];
u8 cmd;
int ret;
- ret = spi_flash_cmd_read_status(flash, &data[0]);
+ ret = read_sr(flash, &data[0]);
if (ret < 0)
return ret;
@@ -123,7 +123,7 @@ static int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc)
#endif
#ifdef CONFIG_SPI_FLASH_BAR
-static int spi_flash_write_bank(struct spi_flash *flash, u32 offset)
+static int spi_flash_write_bar(struct spi_flash *flash, u32 offset)
{
u8 cmd, bank_sel;
int ret;
@@ -144,7 +144,7 @@ bar_end:
return flash->bank_curr;
}
-static int spi_flash_read_bank(struct spi_flash *flash, u8 idcode0)
+static int spi_flash_read_bar(struct spi_flash *flash, u8 idcode0)
{
u8 curr_bank = 0;
int ret;
@@ -175,7 +175,7 @@ bank_end:
#endif
#ifdef CONFIG_SF_DUAL_FLASH
-static void spi_flash_dual_flash(struct spi_flash *flash, u32 *addr)
+static void spi_flash_dual(struct spi_flash *flash, u32 *addr)
{
switch (flash->dual_flash) {
case SF_DUAL_STACKED_FLASH:
@@ -201,7 +201,7 @@ static int spi_flash_sr_ready(struct spi_flash *flash)
u8 sr;
int ret;
- ret = spi_flash_cmd_read_status(flash, &sr);
+ ret = read_sr(flash, &sr);
if (ret < 0)
return ret;
@@ -325,10 +325,10 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
#ifdef CONFIG_SF_DUAL_FLASH
if (flash->dual_flash > SF_SINGLE_FLASH)
- spi_flash_dual_flash(flash, &erase_addr);
+ spi_flash_dual(flash, &erase_addr);
#endif
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_write_bank(flash, erase_addr);
+ ret = spi_flash_write_bar(flash, erase_addr);
if (ret < 0)
return ret;
#endif
@@ -375,10 +375,10 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
#ifdef CONFIG_SF_DUAL_FLASH
if (flash->dual_flash > SF_SINGLE_FLASH)
- spi_flash_dual_flash(flash, &write_addr);
+ spi_flash_dual(flash, &write_addr);
#endif
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_write_bank(flash, write_addr);
+ ret = spi_flash_write_bar(flash, write_addr);
if (ret < 0)
return ret;
#endif
@@ -470,10 +470,10 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
#ifdef CONFIG_SF_DUAL_FLASH
if (flash->dual_flash > SF_SINGLE_FLASH)
- spi_flash_dual_flash(flash, &read_addr);
+ spi_flash_dual(flash, &read_addr);
#endif
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_write_bank(flash, read_addr);
+ ret = spi_flash_write_bar(flash, read_addr);
if (ret < 0)
return ret;
bank_sel = flash->bank_curr;
@@ -671,7 +671,7 @@ int stm_is_locked(struct spi_flash *flash, u32 ofs, size_t len)
int status;
u8 sr;
- status = spi_flash_cmd_read_status(flash, &sr);
+ status = read_sr(flash, &sr);
if (status < 0)
return status;
@@ -708,7 +708,7 @@ int stm_lock(struct spi_flash *flash, u32 ofs, size_t len)
u8 shift = ffs(mask) - 1, pow, val;
int ret;
- ret = spi_flash_cmd_read_status(flash, &status_old);
+ ret = read_sr(flash, &status_old);
if (ret < 0)
return ret;
@@ -745,7 +745,7 @@ int stm_lock(struct spi_flash *flash, u32 ofs, size_t len)
if ((status_new & mask) <= (status_old & mask))
return -EINVAL;
- spi_flash_cmd_write_status(flash, status_new);
+ write_sr(flash, status_new);
return 0;
}
@@ -762,7 +762,7 @@ int stm_unlock(struct spi_flash *flash, u32 ofs, size_t len)
u8 shift = ffs(mask) - 1, pow, val;
int ret;
- ret = spi_flash_cmd_read_status(flash, &status_old);
+ ret = read_sr(flash, &status_old);
if (ret < 0)
return ret;
@@ -795,7 +795,7 @@ int stm_unlock(struct spi_flash *flash, u32 ofs, size_t len)
if ((status_new & mask) >= (status_old & mask))
return -EINVAL;
- spi_flash_cmd_write_status(flash, status_new);
+ write_sr(flash, status_new);
return 0;
}
@@ -808,14 +808,14 @@ static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
u8 qeb_status;
int ret;
- ret = spi_flash_cmd_read_status(flash, &qeb_status);
+ ret = read_sr(flash, &qeb_status);
if (ret < 0)
return ret;
if (qeb_status & STATUS_QEB_MXIC) {
debug("SF: mxic: QEB is already set\n");
} else {
- ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
+ ret = write_sr(flash, STATUS_QEB_MXIC);
if (ret < 0)
return ret;
}
@@ -830,14 +830,14 @@ static int spi_flash_set_qeb_winspan(struct spi_flash *flash)
u8 qeb_status;
int ret;
- ret = spi_flash_cmd_read_config(flash, &qeb_status);
+ ret = read_cr(flash, &qeb_status);
if (ret < 0)
return ret;
if (qeb_status & STATUS_QEB_WINSPAN) {
debug("SF: winspan: QEB is already set\n");
} else {
- ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN);
+ ret = write_cr(flash, STATUS_QEB_WINSPAN);
if (ret < 0)
return ret;
}
@@ -944,7 +944,7 @@ int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash)
#if defined(CONFIG_SPI_FLASH_ATMEL) || \
defined(CONFIG_SPI_FLASH_MACRONIX) || \
defined(CONFIG_SPI_FLASH_SST)
- spi_flash_cmd_write_status(flash, 0);
+ write_sr(flash, 0);
#endif
/* Assign spi data */
@@ -1079,7 +1079,7 @@ int spi_flash_scan(struct spi_slave *spi, struct spi_flash *flash)
/* Configure the BAR - discover bank cmds and read current bank */
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_read_bank(flash, idcode[0]);
+ ret = spi_flash_read_bar(flash, idcode[0]);
if (ret < 0)
return ret;
#endif
--
1.9.1
next prev parent reply other threads:[~2015-12-06 18:34 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-06 18:34 [U-Boot] [PATCH v8 00/14] sf: Tuning spi-flash layer Jagan Teki
2015-12-06 18:34 ` [U-Boot] [PATCH v8 01/14] sf: spi_flash_validate_params => spi_flash_scan Jagan Teki
2015-12-10 1:30 ` Bin Meng
2015-12-10 15:16 ` Jagan Teki
2015-12-11 6:21 ` Bin Meng
2015-12-11 6:31 ` Jagan Teki
2015-12-11 6:44 ` Bin Meng
2015-12-06 18:34 ` [U-Boot] [PATCH v8 02/14] sf: Move spi_flash_scan code to sf_ops Jagan Teki
2015-12-10 1:30 ` Bin Meng
2015-12-06 18:34 ` [U-Boot] [PATCH v8 03/14] sf: Move read_id " Jagan Teki
2015-12-10 1:30 ` Bin Meng
2015-12-06 18:34 ` [U-Boot] [PATCH v8 04/14] sf: probe: Code cleanup Jagan Teki
2015-12-10 1:30 ` Bin Meng
2015-12-06 18:34 ` [U-Boot] [PATCH v8 05/14] sf: Use static for file-scope functions Jagan Teki
2015-12-10 1:31 ` Bin Meng
2015-12-06 18:34 ` [U-Boot] [PATCH v8 06/14] sf: Fix Makefile Jagan Teki
2015-12-06 18:34 ` Jagan Teki [this message]
2015-12-10 1:31 ` [U-Boot] [PATCH v8 07/14] sf: Use simple name for register access functions Bin Meng
2015-12-06 18:34 ` [U-Boot] [PATCH v8 08/14] sf: Flash power up read-only based on idcode0 Jagan Teki
2015-12-10 1:31 ` Bin Meng
2015-12-06 18:34 ` [U-Boot] [PATCH v8 09/14] sf: Remove unneeded header includes Jagan Teki
2015-12-10 1:31 ` Bin Meng
2015-12-06 18:34 ` [U-Boot] [PATCH v8 10/14] sf: Remove unneeded SST_BP and SST_WP Jagan Teki
2015-12-10 1:31 ` Bin Meng
2015-12-06 18:34 ` [U-Boot] [PATCH v8 11/14] sf: ops: Fix missing break on spansion read_bar Jagan Teki
2015-12-09 4:53 ` Simon Glass
2015-12-06 18:34 ` [U-Boot] [PATCH v8 12/14] sf: sf_probe: Remove spi_slave pointer argument Jagan Teki
2015-12-09 4:53 ` Simon Glass
2015-12-10 1:31 ` Bin Meng
2015-12-06 18:34 ` [U-Boot] [PATCH v8 13/14] sf: Use static for file-scope functions Jagan Teki
2015-12-09 4:53 ` Simon Glass
2015-12-10 1:31 ` Bin Meng
2015-12-06 18:34 ` [U-Boot] [PATCH v8 14/14] sf: Rename sf_ops.c to spi-flash.c Jagan Teki
2015-12-09 4:54 ` Simon Glass
2015-12-09 13:48 ` Jagan Teki
2015-12-10 1:31 ` Bin Meng
2015-12-10 15:13 ` Jagan Teki
2015-12-11 6:23 ` Bin Meng
2015-12-11 6:28 ` Jagan Teki
2015-12-11 6:51 ` Bin Meng
2015-12-11 7:02 ` Jagan Teki
2015-12-11 14:34 ` Simon Glass
2015-12-07 13:14 ` [U-Boot] [PATCH v8 00/14] sf: Tuning spi-flash layer Jagan Teki
2015-12-08 11:54 ` Bin Meng
2015-12-08 10:30 ` Jagan Teki
2015-12-10 15:18 ` Jagan Teki
2015-12-10 15:22 ` Jagan Teki
2015-12-11 16:45 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449426866-696-8-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox