[U-Boot] [PATCH] arm: socfpga: Enable ubi and ubifs support

[Chin Liang See <clsee@altera.com>]

Hi Marek,

On Fri, 2015-12-11 at 17:19 +0800, Chin Liang See wrote:
> When QSPI and NAND is enabled, the ubi and ubifs support
> will be enabled too.
> 
> Signed-off-by: Chin Liang See <clsee@altera.com>
> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> Cc: Dinh Nguyen <dinh.linux@gmail.com>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Marek Vasut <marex@denx.de>
> Cc: Stefan Roese <sr@denx.de>
> ---
>  include/configs/socfpga_common.h | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/include/configs/socfpga_common.h
> b/include/configs/socfpga_common.h
> index b3f65b6..a07017b 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -274,6 +274,14 @@ unsigned int
> cm_get_qspi_controller_clk_hz(void);
>  #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
>  #define CONFIG_ENV_SIZE			4096
> 
> +/* UBIFS support */
> +#if defined(CONFIG_CMD_SF) || defined(CONFIG_CMD_NAND)
> +#define CONFIG_CMD_UBI
> +#define CONFIG_CMD_UBIFS
> +#define CONFIG_RBTREE
> +#define CONFIG_LZO
> +#endif
> +

I have issue on ubifsmount my ubinized image. I suspect it might
created wrongly. The code is ok based on previous patches and the one
you sent to me. Wonder you might able to validate with your working
ubinized image?

Thanks in advance!
Chin Liang


>  /*
>   * SPL
>   *
> --
> 1.9.2.468.g3f0c02a
>