From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/8] spi: Rename SPI_OPM_RX_* to SPI_RX_*
Date: Wed, 16 Dec 2015 21:10:42 +0530 [thread overview]
Message-ID: <1450280447-3897-4-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1450280447-3897-1-git-send-email-jteki@openedev.com>
SPI_OPM_RX_AS - SPI_RX_SLOW
SPI_OPM_RX_AF - SPI_RX_FAST
SPI_OPM_RX_DOUT - SPI_RX_DUAL
SPI_OPM_RX_QOF - SPI_RX_QUAD
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
drivers/spi/ich.c | 2 +-
drivers/spi/ti_qspi.c | 2 +-
include/spi.h | 8 ++++----
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
index d11132c..7f41763 100644
--- a/drivers/spi/ich.c
+++ b/drivers/spi/ich.c
@@ -752,7 +752,7 @@ static int ich_spi_child_pre_probe(struct udevice *dev)
* and byte program command for SST flash
*/
if (plat->ich_version == 7) {
- slave->op_mode_rx = SPI_OPM_RX_AS;
+ slave->op_mode_rx = SPI_RX_SLOW;
slave->mode = SPI_TX_BYTE;
}
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index 5747ed1..366243c 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -115,7 +115,7 @@ static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave)
QSPI_SETUP0_NUM_D_BYTES_8_BITS |
QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
QSPI_NUM_DUMMY_BITS);
- slave->op_mode_rx = SPI_OPM_RX_QOF;
+ slave->op_mode_rx = SPI_RX_QUAD;
#else
memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
diff --git a/include/spi.h b/include/spi.h
index 3e3480a..fd09502 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -35,10 +35,10 @@
#define SPI_XFER_U_PAGE (1 << 5)
/* SPI RX operation modes */
-#define SPI_OPM_RX_AS (1 << 0)
-#define SPI_OPM_RX_AF (1 << 1)
-#define SPI_OPM_RX_DOUT (1 << 2)
-#define SPI_OPM_RX_QOF (1 << 4)
+#define SPI_RX_SLOW (1 << 0)
+#define SPI_RX_FAST (1 << 1)
+#define SPI_RX_DUAL (1 << 2)
+#define SPI_RX_QUAD (1 << 4)
/* SPI bus connection options - see enum spi_dual_flash */
#define SPI_CONN_DUAL_SHARED (1 << 0)
--
1.9.1
next prev parent reply other threads:[~2015-12-16 15:40 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-16 15:40 [U-Boot] [PATCH 0/8] spi: Cleanup set Jagan Teki
2015-12-16 15:40 ` [U-Boot] [PATCH 1/8] spi: Remove SPI_OPM_RX_EXTN Jagan Teki
2015-12-21 6:27 ` Bin Meng
2015-12-16 15:40 ` [U-Boot] [PATCH 2/8] spi: Remove SPI_OPM_RX_DIO|QIOF Jagan Teki
2015-12-21 6:28 ` Bin Meng
2015-12-16 15:40 ` Jagan Teki [this message]
2015-12-21 6:28 ` [U-Boot] [PATCH 3/8] spi: Rename SPI_OPM_RX_* to SPI_RX_* Bin Meng
2015-12-16 15:40 ` [U-Boot] [PATCH 4/8] spi: Rename op_mode_rx to mode_rx Jagan Teki
2015-12-21 6:28 ` Bin Meng
2015-12-23 6:36 ` Jagan Teki
2015-12-23 7:23 ` Bin Meng
2015-12-28 12:19 ` Jagan Teki
2015-12-16 15:40 ` [U-Boot] [PATCH 5/8] spi: Move mode, mode_rx, flags macro's to structure Jagan Teki
2015-12-21 5:48 ` Bin Meng
2015-12-23 6:38 ` Jagan Teki
2015-12-16 15:40 ` [U-Boot] [PATCH 6/8] spi: Fix bit assignment with flags Jagan Teki
2015-12-21 6:28 ` Bin Meng
2015-12-16 15:40 ` [U-Boot] [PATCH 7/8] spi: Use BIT macro Jagan Teki
2015-12-21 6:28 ` Bin Meng
2015-12-16 15:40 ` [U-Boot] [PATCH 8/8] spi: Minor cleanup Jagan Teki
2015-12-21 6:28 ` Bin Meng
2015-12-17 7:14 ` [U-Boot] [PATCH 0/8] spi: Cleanup set Jagan Teki
2015-12-17 7:15 ` Jagan Teki
2015-12-17 7:28 ` Bin Meng
2015-12-23 10:02 ` Mugunthan V N
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450280447-3897-4-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox