From: Peng Fan <van.freenix@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 04/11] imx: mx7d: Add RDC support
Date: Tue, 5 Jan 2016 13:56:17 +0800 [thread overview]
Message-ID: <1451973384-26824-5-git-send-email-van.freenix@gmail.com> (raw)
In-Reply-To: <1451973384-26824-1-git-send-email-van.freenix@gmail.com>
From: Peng Fan <peng.fan@nxp.com>
Add the peripherals/masters definitions and registers base addresses
for mx7d RDC.
Signed-off-by: Ye.Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/include/asm/arch-mx7/imx-rdc.h | 16 +++
arch/arm/include/asm/arch-mx7/imx-regs.h | 3 +
arch/arm/include/asm/arch-mx7/mx7d_rdc.h | 163 +++++++++++++++++++++++++++++++
3 files changed, 182 insertions(+)
create mode 100644 arch/arm/include/asm/arch-mx7/imx-rdc.h
create mode 100644 arch/arm/include/asm/arch-mx7/mx7d_rdc.h
diff --git a/arch/arm/include/asm/arch-mx7/imx-rdc.h b/arch/arm/include/asm/arch-mx7/imx-rdc.h
new file mode 100644
index 0000000..dbeed56
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx7/imx-rdc.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __IMX_RDC_H__
+#define __IMX_RDC_H__
+
+#if defined(CONFIG_MX7D)
+#include "mx7d_rdc.h"
+#else
+#error "Please select cpu"
+#endif /* CONFIG_MX7D */
+
+#endif /* __IMX_RDC_H__*/
diff --git a/arch/arm/include/asm/arch-mx7/imx-regs.h b/arch/arm/include/asm/arch-mx7/imx-regs.h
index 58a25c7..8e66d3d 100644
--- a/arch/arm/include/asm/arch-mx7/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx7/imx-regs.h
@@ -212,6 +212,9 @@
#define DEBUG_MONITOR_BASE_ADDR IP2APB_AXIMON_IPS_BASE_ADDR
#define USB_BASE_ADDR USBOTG1_IPS_BASE_ADDR
+#define SEMAPHORE1_BASE_ADDR SEMA41_IPS_BASE_ADDR
+#define SEMAPHORE2_BASE_ADDR SEMA42_IPS_BASE_ADDR
+#define RDC_BASE_ADDR RDC_IPS_BASE_ADDR
#define FEC_QUIRK_ENET_MAC
#define SNVS_LPGPR 0x68
diff --git a/arch/arm/include/asm/arch-mx7/mx7d_rdc.h b/arch/arm/include/asm/arch-mx7/mx7d_rdc.h
new file mode 100644
index 0000000..9073cbd
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx7/mx7d_rdc.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __MX7D_RDC_H__
+#define __MX7D_RDC_H__
+
+#define RDC_SEMA_PROC_ID 2 /* The processor ID for main CPU */
+
+enum {
+ RDC_PER_GPIO1 = 0,
+ RDC_PER_GPIO2,
+ RDC_PER_GPIO3,
+ RDC_PER_GPIO4,
+ RDC_PER_GPIO5,
+ RDC_PER_GPIO6,
+ RDC_PER_GPIO7,
+ RDC_PER_IOMUXC_LPSR_GPR,
+ RDC_PER_WDOG1,
+ RDC_PER_WDOG2,
+ RDC_PER_WDOG3,
+ RDC_PER_WDOG4,
+ RDC_PER_IOMUXC_LPSR,
+ RDC_PER_GPT1,
+ RDC_PER_GPT2,
+ RDC_PER_GPT3,
+ RDC_PER_GPT4,
+ RDC_PER_ROMCP,
+ RDC_PER_KPP,
+ RDC_PER_IOMUXC,
+ RDC_PER_IOMUXCGPR,
+ RDC_PER_OCOTP,
+ RDC_PER_ANATOP_DIG,
+ RDC_PER_SNVS_HP,
+ RDC_PER_CCM,
+ RDC_PER_SRC,
+ RDC_PER_GPC,
+ RDC_PER_SEMA1,
+ RDC_PER_SEMA2,
+ RDC_PER_RDC,
+ RDC_PER_CSU,
+ RDC_PER_RESERVED1,
+ RDC_PER_RESERVED2,
+ RDC_PER_ADC1,
+ RDC_PER_ADC2,
+ RDC_PER_ECSPI4,
+ RDC_PER_FLEX_TIMER1,
+ RDC_PER_FLEX_TIMER2,
+ RDC_PER_PWM1,
+ RDC_PER_PWM2,
+ RDC_PER_PWM3,
+ RDC_PER_PWM4,
+ RDC_PER_SYSTEM_COUNTER_READ,
+ RDC_PER_SYSTEM_COUNTER_COMPARE,
+ RDC_PER_SYSTEM_COUNTER_CONTROL,
+ RDC_PER_PCIE_PHY,
+ RDC_PER_RESERVED3,
+ RDC_PER_EPDC,
+ RDC_PER_PXP,
+ RDC_PER_CSI,
+ RDC_PER_RESERVED4,
+ RDC_PER_LCDIF,
+ RDC_PER_RESERVED5,
+ RDC_PER_MIPI_CSI,
+ RDC_PER_MIPI_DSI,
+ RDC_PER_RESERVED6,
+ RDC_PER_TZASC,
+ RDC_PER_DDR_PHY,
+ RDC_PER_DDRC,
+ RDC_PER_RESERVED7,
+ RDC_PER_PERFMON1,
+ RDC_PER_PERFMON2,
+ RDC_PER_AXI_DEBUG_MON,
+ RDC_PER_QOSC,
+ RDC_PER_FLEXCAN1,
+ RDC_PER_FLEXCAN2,
+ RDC_PER_I2C1,
+ RDC_PER_I2C2,
+ RDC_PER_I2C3,
+ RDC_PER_I2C4,
+ RDC_PER_UART4,
+ RDC_PER_UART5,
+ RDC_PER_UART6,
+ RDC_PER_UART7,
+ RDC_PER_MU_A,
+ RDC_PER_MU_B,
+ RDC_PER_SEMAPHORE_HS,
+ RDC_PER_USB_PL301,
+ RDC_PER_RESERVED8,
+ RDC_PER_RESERVED9,
+ RDC_PER_RESERVED10,
+ RDC_PER_USB1,
+ RDC_PER_USB2,
+ RDC_PER_USB3,
+ RDC_PER_USDHC1,
+ RDC_PER_USDHC2,
+ RDC_PER_USDHC3,
+ RDC_PER_RESERVED11,
+ RDC_PER_RESERVED12,
+ RDC_PER_SIM1,
+ RDC_PER_SIM2,
+ RDC_PER_QSPI,
+ RDC_PER_WEIM,
+ RDC_PER_SDMA,
+ RDC_PER_ENET1,
+ RDC_PER_ENET2,
+ RDC_PER_RESERVED13,
+ RDC_PER_RESERVED14,
+ RDC_PER_ECSPI1,
+ RDC_PER_ECSPI2,
+ RDC_PER_ECSPI3,
+ RDC_PER_RESERVED15,
+ RDC_PER_UART1,
+ RDC_PER_UART2,
+ RDC_PER_UART3,
+ RDC_PER_RESERVED16,
+ RDC_PER_SAI1,
+ RDC_PER_SAI2,
+ RDC_PER_SAI3,
+ RDC_PER_RESERVED17,
+ RDC_PER_RESERVED18,
+ RDC_PER_SPBA,
+ RDC_PER_DAP,
+ RDC_PER_RESERVED19,
+ RDC_PER_RESERVED20,
+ RDC_PER_RESERVED21,
+ RDC_PER_CAAM,
+ RDC_PER_RESERVED22,
+};
+
+enum {
+ RDC_MA_A7 = 0,
+ RDC_MA_M4,
+ RDC_MA_PCIE,
+ RDC_MA_CSI,
+ RDC_MA_EPDC,
+ RDC_MA_LCDIF,
+ RDC_MA_DISPLAY_PORT,
+ RDC_MA_PXP,
+ RDC_MA_CORESIGHT,
+ RDC_MA_DAP,
+ RDC_MA_CAAM,
+ RDC_MA_SDMA_PERI,
+ RDC_MA_SDMA_BURST,
+ RDC_MA_APBHDMA,
+ RDC_MA_RAWNAND,
+ RDC_MA_USDHC1,
+ RDC_MA_USDHC2,
+ RDC_MA_USDHC3,
+ RDC_MA_NC1,
+ RDC_MA_USB,
+ RDC_MA_NC2,
+ RDC_MA_TEST,
+ RDC_MA_ENET1_TX,
+ RDC_MA_ENET1_RX,
+ RDC_MA_ENET2_TX,
+ RDC_MA_ENET2_RX,
+ RDC_MA_SDMA,
+};
+
+#endif /* __MX7D_RDC_H__*/
--
2.6.2
next prev parent reply other threads:[~2016-01-05 5:56 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-05 5:56 [U-Boot] [PATCH 00/11] imx: introduce rdc and boot auxiliary core Peng Fan
2016-01-05 5:56 ` [U-Boot] [PATCH 01/11] imx: mx6: introduce rdc regs Peng Fan
2016-01-05 5:56 ` [U-Boot] [PATCH 02/11] imx: imx-common: introduce Resource Domain Controller support Peng Fan
2016-01-07 6:52 ` Stefan Agner
2016-01-07 7:34 ` Peng Fan
2016-01-05 5:56 ` [U-Boot] [PATCH 03/11] imx: mx6sx Add RDC mappings of masters and peripherals Peng Fan
2016-01-07 6:55 ` Stefan Agner
2016-01-05 5:56 ` Peng Fan [this message]
2016-01-05 5:56 ` [U-Boot] [PATCH 05/11] imx: mx7d: clock support for RDC Peng Fan
2016-01-05 5:56 ` [U-Boot] [PATCH 06/11] imx: imx-common: introduce boot auxiliary core Peng Fan
2016-01-07 6:59 ` Stefan Agner
2016-01-07 8:38 ` Peng Fan
2016-01-08 1:51 ` Ye Li
2016-01-13 20:45 ` Stefan Agner
2016-01-14 17:15 ` Tom Rini
2016-01-14 17:54 ` Stefan Agner
2016-01-14 18:07 ` Tom Rini
2016-01-18 4:07 ` Peng Fan
2016-01-14 17:17 ` Simon Glass
2016-01-18 4:14 ` Peng Fan
2016-01-05 5:56 ` [U-Boot] [PATCH 07/11] imx: mx6: implement functions to " Peng Fan
2016-01-05 5:56 ` [U-Boot] [PATCH 08/11] imx: mx6sxsabresd: add command and macros for boot m4 core Peng Fan
2016-01-05 5:56 ` [U-Boot] [PATCH 09/11] imx: mx7: implement functions to boot auxiliary core Peng Fan
2016-01-05 5:56 ` [U-Boot] [PATCH 10/11] imx: mx7dsabresd: add command and macros for boot m4 core Peng Fan
2016-01-05 5:56 ` [U-Boot] [PATCH 11/11] imx: mx7d: isolate resources to domain 0 for A7 core Peng Fan
2016-01-07 7:04 ` Stefan Agner
2016-01-07 10:42 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451973384-26824-5-git-send-email-van.freenix@gmail.com \
--to=van.freenix@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox