From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 08/12] mtd: dataflash: Minor cleanups
Date: Fri, 12 Feb 2016 14:06:13 +0530 [thread overview]
Message-ID: <1455266174-3240-9-git-send-email-jteki@openedev.com> (raw)
In-Reply-To: <1455266174-3240-1-git-send-email-jteki@openedev.com>
- rename spi_dataflash to mtd_dataflash
- fix single line comments
- remove unneeded spaces
- ascending order of include files
- rename spi_dataflash_* to dataflash_*
- rename SPI DATAFLASH to dataflash
- rename SPI DataFlash to dataflash
- return NULL replaced with error code
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: York Sun <york.sun@nxp.com>
Cc: Haikun Wang <haikun.wang@freescale.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
drivers/mtd/spi-nor/sf_dataflash.c | 51 ++++++++++++++++----------------------
1 file changed, 22 insertions(+), 29 deletions(-)
diff --git a/drivers/mtd/spi-nor/sf_dataflash.c b/drivers/mtd/spi-nor/sf_dataflash.c
index 9943560..2a5f5ae 100644
--- a/drivers/mtd/spi-nor/sf_dataflash.c
+++ b/drivers/mtd/spi-nor/sf_dataflash.c
@@ -1,5 +1,4 @@
/*
- *
* Atmel DataFlash probing
*
* Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
@@ -7,8 +6,10 @@
* Haikun Wang (haikun.wang at freescale.com)
*
* SPDX-License-Identifier: GPL-2.0+
-*/
+ */
+
#include <common.h>
+#include <div64.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
@@ -67,7 +68,6 @@
#define OP_WRITE_SECURITY_REVC 0x9A
#define OP_WRITE_SECURITY 0x9B /* revision D */
-
struct dataflash {
uint8_t command[16];
@@ -77,9 +77,7 @@ struct dataflash {
struct spi_slave *spi;
};
-/*
- * Return the status of the DataFlash device.
- */
+/* Return the status of the DataFlash device */
static inline int dataflash_status(struct spi_slave *spi)
{
int ret;
@@ -118,9 +116,7 @@ static int dataflash_waitready(struct spi_slave *spi)
return -ETIME;
}
-/*
- * Erase pages of flash.
- */
+/* Erase pages of flash */
static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
{
struct dataflash *priv = mtd->priv;
@@ -145,7 +141,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
status = spi_claim_bus(spi);
if (status) {
- debug("SPI DATAFLASH: unable to claim SPI bus\n");
+ debug("dataflash: unable to claim SPI bus\n");
return status;
}
@@ -231,7 +227,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
status = spi_claim_bus(spi);
if (status) {
- debug("SPI DATAFLASH: unable to claim SPI bus\n");
+ debug("dataflash: unable to claim SPI bus\n");
return status;
}
@@ -290,7 +286,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
status = spi_claim_bus(spi);
if (status) {
- debug("SPI DATAFLASH: unable to claim SPI bus\n");
+ debug("dataflash: unable to claim SPI bus\n");
return status;
}
@@ -387,7 +383,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
/* Check result of the compare operation */
if (status & (1 << 6)) {
- printf("SPI DataFlash: write compare page %u, err %d\n",
+ printf("dataflash: write compare page %u, err %d\n",
pageaddr, status);
remaining = 0;
status = -EIO;
@@ -551,7 +547,7 @@ static struct flash_info *jedec_probe(struct spi_slave *spi)
if (info->flags & SUP_POW2PS) {
status = dataflash_status(spi);
if (status < 0) {
- debug("SPI DataFlash: status error %d\n",
+ debug("dataflash: status error %d\n",
status);
return NULL;
}
@@ -573,10 +569,8 @@ static struct flash_info *jedec_probe(struct spi_slave *spi)
* size (it might be binary) even when we can tell which density
* class is involved (legacy chip id scheme).
*/
- printf("SPI DataFlash: Unsupported flash IDs: ");
- printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
- id[0], jedec, id[3] << 8 | id[4]);
- return NULL;
+ printf("dataflash: JEDEC id %06x not handled\n", jedec);
+ return ERR_PTR(-ENODEV);
}
/*
@@ -593,7 +587,7 @@ static struct flash_info *jedec_probe(struct spi_slave *spi)
* AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11
* AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11
*/
-static int spi_dataflash_probe(struct udevice *dev)
+static int dataflash_probe(struct udevice *dev)
{
struct spi_slave *spi = dev_get_parent_priv(dev);
struct flash_info *info;
@@ -621,19 +615,19 @@ static int spi_dataflash_probe(struct udevice *dev)
goto err_status;
}
- /*
+ /*
* Older chips support only legacy commands, identifing
* capacity using bits in the status byte.
*/
status = dataflash_status(spi);
if (status <= 0 || status == 0xff) {
- printf("SPI DataFlash: read status error %d\n", status);
+ printf("dataflash: read status error %d\n", status);
if (status == 0 || status == 0xff)
status = -ENODEV;
goto err_jedec_probe;
}
- /*
+ /*
* if there's a device there, assume it's dataflash.
* board setup should have set spi->max_speed_max to
* match f(car) for continuous reads, mode 0 or 3.
@@ -663,8 +657,7 @@ static int spi_dataflash_probe(struct udevice *dev)
break;
/* obsolete AT45DB1282 not (yet?) supported */
default:
- dev_info(&spi->dev, "unsupported device (%x)\n",
- status & 0x3c);
+ printf("dataflash: unsupported device (%x)\n", status & 0x3c);
status = -ENODEV;
goto err_status;
}
@@ -678,16 +671,16 @@ err_jedec_probe:
return status;
}
-static const struct udevice_id spi_dataflash_ids[] = {
+static const struct udevice_id dataflash_ids[] = {
{ .compatible = "atmel,at45", },
{ .compatible = "atmel,dataflash", },
{ }
};
-U_BOOT_DRIVER(spi_dataflash) = {
- .name = "spi_dataflash",
+U_BOOT_DRIVER(mtd_dataflash) = {
+ .name = "mtd_dataflash",
.id = UCLASS_MTD,
- .of_match = spi_dataflash_ids,
- .probe = spi_dataflash_probe,
+ .of_match = dataflash_ids,
+ .probe = dataflash_probe,
.priv_auto_alloc_size = sizeof(struct dataflash),
};
--
1.9.1
next prev parent reply other threads:[~2016-02-12 8:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-12 8:36 [U-Boot] [PATCH 00/12] mtd: dataflash: Add UCLASS_MTD Jagan Teki
2016-02-12 8:36 ` [U-Boot] [PATCH 01/12] mtd: spi-nor: Copy sf_dataflash Jagan Teki
2016-02-12 16:55 ` york sun
2016-02-12 17:51 ` Jagan Teki
2016-02-12 19:12 ` york sun
2016-02-12 19:28 ` Simon Glass
2016-02-12 19:31 ` Simon Glass
2016-02-12 8:36 ` [U-Boot] [PATCH 02/12] mtd: dataflash: Remove unneeded spi data Jagan Teki
2016-02-12 8:36 ` [U-Boot] [PATCH 03/12] mtd: dataflash: Move flash id detection into jedec_probe Jagan Teki
2016-02-12 8:36 ` [U-Boot] [PATCH 04/12] mtd: dataflash: Fix add_dataflash return logic Jagan Teki
2016-02-12 8:36 ` [U-Boot] [PATCH 05/12] mtd: dataflash: Add UCLASS_MTD support Jagan Teki
2016-02-12 8:36 ` [U-Boot] [PATCH 06/12] mtd: dataflash: Use spi_write_then_read Jagan Teki
2016-02-12 8:36 ` [U-Boot] [PATCH 07/12] mtd: dataflash: Drop sf_internal.h Jagan Teki
2016-02-12 8:36 ` Jagan Teki [this message]
2016-02-12 8:36 ` [U-Boot] [PATCH 09/12] mtd: Rename sf_dataflash.c to mtd_dataflash.c Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455266174-3240-9-git-send-email-jteki@openedev.com \
--to=jteki@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox