public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Stuart Yoder <stuart.yoder@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/7 v2] pci/layerscape: add support for LUT
Date: Thu, 25 Feb 2016 17:06:20 -0600	[thread overview]
Message-ID: <1456441583-20932-5-git-send-email-stuart.yoder@nxp.com> (raw)
In-Reply-To: <1456441583-20932-1-git-send-email-stuart.yoder@nxp.com>

From: Stuart Yoder <stuart.yoder@nxp.com>

The per-PCI controller LUT (Look-Up-Table) is a 32-entry table
that maps PCI requester IDs (bus/dev/fun) to a stream ID.

This patch implements infrastructure to enable LUT initialization:
  -define registers offsets
  -add an index to 'struct ls_pcie' to track next available slot in LUT
  -add function to allocate the next available entry index
  -add function to program a LUT entry

Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
---
-v2
  -no changes

 drivers/pci/pcie_layerscape.c |   36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c
index bb29222..6886488 100644
--- a/drivers/pci/pcie_layerscape.c
+++ b/drivers/pci/pcie_layerscape.c
@@ -58,6 +58,13 @@
 #define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
 #define PCIE_ATU_UPPER_TARGET		0x91C
 
+/* LUT registers */
+#define PCIE_LUT_BASE		0x80000
+#define PCIE_LUT_UDR(n)         (0x800 + (n) * 8)
+#define PCIE_LUT_LDR(n)         (0x804 + (n) * 8)
+#define PCIE_LUT_ENABLE         (1 << 31)
+#define PCIE_LUT_ENTRY_COUNT    32
+
 #define PCIE_DBI_RO_WR_EN	0x8bc
 
 #define PCIE_LINK_CAP		0x7c
@@ -93,6 +100,7 @@ struct ls_pcie {
 	void __iomem *dbi;
 	void __iomem *va_cfg0;
 	void __iomem *va_cfg1;
+	int next_lut_index;
 	struct pci_controller hose;
 };
 
@@ -482,6 +490,33 @@ static void ls_pcie_setup_ep(struct ls_pcie *pcie, struct ls_pcie_info *info)
 	}
 }
 
+
+/*
+ * Return next available LUT index.
+ */
+static u32 ls_pcie_next_lut_index(struct ls_pcie *pcie)
+{
+	if (pcie->next_lut_index < PCIE_LUT_ENTRY_COUNT)
+		return pcie->next_lut_index++;
+	else
+		return -1;  /* LUT is full */
+}
+
+/*
+ * Program a single LUT entry
+ */
+static void ls_pcie_lut_set_mapping(struct ls_pcie *pcie, int index, u32 devid,
+			     u32 streamid)
+{
+	void __iomem *lut;
+
+	lut = pcie->dbi + PCIE_LUT_BASE;
+
+	/* leave mask as all zeroes, want to match all bits */
+	writel((devid << 16), lut + PCIE_LUT_UDR(index));
+	writel(streamid | PCIE_LUT_ENABLE, lut + PCIE_LUT_LDR(index));
+}
+
 int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
 {
 	struct ls_pcie *pcie;
@@ -513,6 +548,7 @@ int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
 	pcie->va_cfg1 = map_physmem(info->cfg1_phys,
 				    info->cfg1_size,
 				    MAP_NOCACHE);
+	pcie->next_lut_index = 0;
 
 	/* outbound memory */
 	pci_set_region(&hose->regions[0],
-- 
1.7.9.5

  parent reply	other threads:[~2016-02-25 23:06 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-25 23:06 [U-Boot] [PATCH 0/7 v2] support mapping PCI device ids to stream ids for MSIs Stuart Yoder
2016-02-25 23:06 ` [U-Boot] [PATCH 1/7 v2] armv8: ls2080a: remove obsolete stream ID partitioning support Stuart Yoder
2016-02-25 23:06 ` [U-Boot] [PATCH 3/7 v2] pci: make pci_get_hose_head() available to external users Stuart Yoder
2016-02-25 23:06 ` Stuart Yoder [this message]
2016-02-26  5:56   ` [U-Boot] [PATCH 4/7 v2] pci/layerscape: add support for LUT Minghuan Lian
2016-02-26 15:43     ` Stuart Yoder
2016-02-25 23:06 ` [U-Boot] [PATCH 5/7 v2] pci/layerscape: add stream ID allocator Stuart Yoder
2016-02-25 23:06 ` [U-Boot] [PATCH 6/7 v2] pci/layerscape: fdt: function to set msi-map entries Stuart Yoder
2016-02-25 23:06 ` [U-Boot] [PATCH 7/7 v2] pci/layerscape: set LUT and msi-map for discovered PCI devices Stuart Yoder
2016-02-26  5:55   ` Minghuan Lian
2016-02-26 15:10     ` Stuart Yoder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456441583-20932-5-git-send-email-stuart.yoder@nxp.com \
    --to=stuart.yoder@nxp.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox