From: Stuart Yoder <stuart.yoder@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/7 v3] pci/layerscape: add support for LUT
Date: Fri, 26 Feb 2016 10:31:59 -0600 [thread overview]
Message-ID: <1456504322-4968-5-git-send-email-stuart.yoder@nxp.com> (raw)
In-Reply-To: <1456504322-4968-1-git-send-email-stuart.yoder@nxp.com>
From: Stuart Yoder <stuart.yoder@nxp.com>
The per-PCI controller LUT (Look-Up-Table) is a 32-entry table
that maps PCI requester IDs (bus/dev/fun) to a stream ID.
This patch implements infrastructure to enable LUT initialization:
-define registers offsets
-add an index to 'struct ls_pcie' to track next available slot in LUT
-add function to allocate the next available entry index
-add function to program a LUT entry
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
---
-v3
-moved LUT #defines to immap_lsch3.h, made index
allocator return an int
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 4 +++
drivers/pci/pcie_layerscape.c | 29 ++++++++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 91f3ce8..d04e336 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -86,6 +86,10 @@
#define PCIE_LUT_BASE 0x80000
#define PCIE_LUT_LCTRL0 0x7F8
#define PCIE_LUT_DBG 0x7FC
+#define PCIE_LUT_UDR(n) (0x800 + (n) * 8)
+#define PCIE_LUT_LDR(n) (0x804 + (n) * 8)
+#define PCIE_LUT_ENABLE (1 << 31)
+#define PCIE_LUT_ENTRY_COUNT 32
/* Device Configuration */
#define DCFG_BASE 0x01e00000
diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c
index bb29222..8b1e6fb 100644
--- a/drivers/pci/pcie_layerscape.c
+++ b/drivers/pci/pcie_layerscape.c
@@ -93,6 +93,7 @@ struct ls_pcie {
void __iomem *dbi;
void __iomem *va_cfg0;
void __iomem *va_cfg1;
+ int next_lut_index;
struct pci_controller hose;
};
@@ -482,6 +483,33 @@ static void ls_pcie_setup_ep(struct ls_pcie *pcie, struct ls_pcie_info *info)
}
}
+
+/*
+ * Return next available LUT index.
+ */
+static int ls_pcie_next_lut_index(struct ls_pcie *pcie)
+{
+ if (pcie->next_lut_index < PCIE_LUT_ENTRY_COUNT)
+ return pcie->next_lut_index++;
+ else
+ return -1; /* LUT is full */
+}
+
+/*
+ * Program a single LUT entry
+ */
+static void ls_pcie_lut_set_mapping(struct ls_pcie *pcie, int index, u32 devid,
+ u32 streamid)
+{
+ void __iomem *lut;
+
+ lut = pcie->dbi + PCIE_LUT_BASE;
+
+ /* leave mask as all zeroes, want to match all bits */
+ writel((devid << 16), lut + PCIE_LUT_UDR(index));
+ writel(streamid | PCIE_LUT_ENABLE, lut + PCIE_LUT_LDR(index));
+}
+
int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
{
struct ls_pcie *pcie;
@@ -513,6 +541,7 @@ int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
pcie->va_cfg1 = map_physmem(info->cfg1_phys,
info->cfg1_size,
MAP_NOCACHE);
+ pcie->next_lut_index = 0;
/* outbound memory */
pci_set_region(&hose->regions[0],
--
1.7.9.5
next prev parent reply other threads:[~2016-02-26 16:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-26 16:31 [U-Boot] [PATCH 0/7 v3] support mapping PCI device ids to stream ids for MSIs Stuart Yoder
2016-02-26 16:31 ` [U-Boot] [PATCH 1/7 v3] armv8: ls2080a: remove obsolete stream ID partitioning support Stuart Yoder
2016-02-26 16:31 ` [U-Boot] [PATCH 2/7 v3] armv8: ls2080a: update stream ID partitioning info Stuart Yoder
2016-02-26 16:31 ` [U-Boot] [PATCH 3/7 v3] pci: make pci_get_hose_head() available to external users Stuart Yoder
2016-02-26 16:31 ` Stuart Yoder [this message]
2016-03-07 22:32 ` [U-Boot] [PATCH 4/7 v3] pci/layerscape: add support for LUT york sun
2016-03-08 15:19 ` Stuart Yoder
2016-02-26 16:32 ` [U-Boot] [PATCH 5/7 v3] pci/layerscape: add stream ID allocator Stuart Yoder
2016-02-26 16:32 ` [U-Boot] [PATCH 6/7 v3] pci/layerscape: fdt: function to set msi-map entries Stuart Yoder
2016-02-26 16:32 ` [U-Boot] [PATCH 7/7 v3] pci/layerscape: set LUT and msi-map for discovered PCI devices Stuart Yoder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456504322-4968-5-git-send-email-stuart.yoder@nxp.com \
--to=stuart.yoder@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox