[U-Boot] [PATCH v2 1/2] mx7_common: Put early/late init configs into board file

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <fabio.estevam@nxp.com>

CONFIG_BOARD_EARLY_INIT_F and CONFIG_BOARD_LATE_INIT should not be
placed into mx7_common because not all boards need these options.

Move them to the board file instead.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
Changes since v1:
- None

 include/configs/mx7_common.h  | 3 ---
 include/configs/mx7dsabresd.h | 3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index fac7c3f..a78fc7c 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -32,9 +32,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 2c981e0..d233572 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -14,6 +14,9 @@
 #define CONFIG_DBG_MONITOR
 #define PHYS_SDRAM_SIZE			SZ_1G
 
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
 /* Uncomment to enable secure boot support */
 /* #define CONFIG_SECURE_BOOT */
 #define CONFIG_CSF_SIZE			0x4000
-- 
1.9.1