public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata
Date: Tue,  1 Mar 2016 17:23:29 -0600	[thread overview]
Message-ID: <1456874609-29666-1-git-send-email-aford173@gmail.com> (raw)

A few boards still use ns16550_platdata structures, but assume the structure
is going to be in a specific order. By explicitly naming each entry,
this should also help 'future-proof' in the event the structure changes.

Tested on the Logic PD Torpedo + Wireless.

I only changed a handful of devices that used the same syntax as the Logic
board.  Appologies if I missed one or stepped on toes.  Thanks to Derald Woods
and Alexander Graf.

Signed-off-by: Adam Ford <aford173@gmail.com>

V4: Fix subject heading

V3: Remove  reg_offset out in all the structs. It was reverted out, and and if
it did exist, it would get initialized to 0 by default.

V2: I hastily copy-pasted the boards without looking at the UART number.
This addresses 3 boards that use UART3 and not UART1.
---
 board/isee/igep00x0/igep00x0.c      | 6 +++---
 board/logicpd/omap3som/omap3logic.c | 6 +++---
 board/logicpd/zoom1/zoom1.c         | 6 +++---
 board/overo/overo.c                 | 6 +++---
 board/quipos/cairo/cairo.c          | 6 +++---
 board/ti/beagle/beagle.c            | 6 +++---
 board/timll/devkit8000/devkit8000.c | 6 +++---
 7 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index e2fce50..d1a6a6f 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -34,9 +34,9 @@ static const u32 gpmc_lan_config[] = {
 #endif
 
 static const struct ns16550_platdata igep_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(igep_uart) = {
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 668f684..51d2987 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -47,9 +47,9 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 
 static const struct ns16550_platdata omap3logic_serial = {
-	OMAP34XX_UART1,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART1,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(omap3logic_uart) = {
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 4040114..982619c 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -44,9 +44,9 @@ static const u32 gpmc_lab_enet[] = {
 };
 
 static const struct ns16550_platdata zoom1_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(zoom1_uart) = {
diff --git a/board/overo/overo.c b/board/overo/overo.c
index a38b959..40f13e5 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -68,9 +68,9 @@ static struct {
 } expansion_config = {0x0};
 
 static const struct ns16550_platdata overo_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(overo_uart) = {
diff --git a/board/quipos/cairo/cairo.c b/board/quipos/cairo/cairo.c
index 21793e8..77e4482 100644
--- a/board/quipos/cairo/cairo.c
+++ b/board/quipos/cairo/cairo.c
@@ -91,9 +91,9 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
 #endif
 
 static const struct ns16550_platdata cairo_serial = {
-	OMAP34XX_UART2,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART2,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(cairo_uart) = {
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index ff317ef..0ed4f52 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -73,9 +73,9 @@ static struct {
 } expansion_config;
 
 static const struct ns16550_platdata beagle_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(beagle_uart) = {
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 1a447c7..965252f 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -46,9 +46,9 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
 };
 
 static const struct ns16550_platdata devkit8000_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(devkit8000_uart) = {
-- 
1.9.1

             reply	other threads:[~2016-03-01 23:23 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-01 23:23 Adam Ford [this message]
2016-03-02  0:01 ` [U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata Alexander Graf
2016-03-02  0:05   ` Adam Ford
2016-03-02  0:31     ` Alexander Graf
2016-03-02 11:29   ` Adam Ford
2016-03-02 15:13     ` Alexander Graf
2016-03-03 15:44       ` Adam Ford

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456874609-29666-1-git-send-email-aford173@gmail.com \
    --to=aford173@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox