[U-Boot] [PATCH 1/2] imx: mx6sx: move MX6SX to Kconfig entry

[U-Boot] [PATCH 1/2] imx: mx6sx: move MX6SX to Kconfig entry

[Peng Fan]

If including MX6SX in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS
will not effect.So move MX6SX to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to
"select MX6SX" to boards using i.MX6 SoloX.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
---
 arch/arm/cpu/armv7/mx6/Kconfig     | 2 ++
 configs/mx6sxsabreauto_defconfig   | 2 +-
 configs/mx6sxsabresd_defconfig     | 2 +-
 configs/mx6sxsabresd_spl_defconfig | 2 +-
 4 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index c72a150..8827caa 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -92,12 +92,14 @@ config TARGET_MX6SLEVK
 
 config TARGET_MX6SXSABRESD
 	bool "mx6sxsabresd"
+	select MX6SX
 	select SUPPORT_SPL
 	select DM
 	select DM_THERMAL
 
 config TARGET_MX6SXSABREAUTO
         bool "mx6sxsabreauto"
+	select MX6SX
         select DM
         select DM_THERMAL
 
diff --git a/configs/mx6sxsabreauto_defconfig b/configs/mx6sxsabreauto_defconfig
index d9e35df..631a998 100644
--- a/configs/mx6sxsabreauto_defconfig
+++ b/configs/mx6sxsabreauto_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_MX6SXSABREAUTO=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg,MX6SX"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabreauto/imximage.cfg"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
index 953a246..6f97279 100644
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_MX6SXSABRESD=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
diff --git a/configs/mx6sxsabresd_spl_defconfig b/configs/mx6sxsabresd_spl_defconfig
index 3843f99..2b76e09 100644
--- a/configs/mx6sxsabresd_spl_defconfig
+++ b/configs/mx6sxsabresd_spl_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_MX6SXSABRESD=y
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6SX"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
-- 
2.6.2

[U-Boot] [PATCH 2/2] imx: mx7d: move MX7D to Kconfig entry

[Peng Fan]

If including MX7D in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS
 will not effect.So move MX7D to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to
"select MX7D" to boards using i.MX7 Dual.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
---
 arch/arm/cpu/armv7/mx7/Kconfig | 1 +
 configs/mx7dsabresd_defconfig  | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv7/mx7/Kconfig b/arch/arm/cpu/armv7/mx7/Kconfig
index 97d6238..aa3ace8 100644
--- a/arch/arm/cpu/armv7/mx7/Kconfig
+++ b/arch/arm/cpu/armv7/mx7/Kconfig
@@ -15,6 +15,7 @@ choice
 
 config TARGET_MX7DSABRESD
 	bool "mx7dsabresd"
+	select MX7D
 	select DM
 	select DM_THERMAL
 
diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig
index 1d262c1..6638475 100644
--- a/configs/mx7dsabresd_defconfig
+++ b/configs/mx7dsabresd_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX7=y
 CONFIG_TARGET_MX7DSABRESD=y
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg,MX7D"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg"
 # CONFIG_CMD_BOOTD is not set
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
-- 
2.6.2

[U-Boot] [PATCH 1/2] imx: mx6sx: move MX6SX to Kconfig entry

[Fabio Estevam]

On Thu, Mar 3, 2016 at 4:56 AM, Peng Fan <van.freenix@gmail.com> wrote:
> If including MX6SX in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS
> will not effect.So move MX6SX to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to
> "select MX6SX" to boards using i.MX6 SoloX.
>
> Signed-off-by: Peng Fan <van.freenix@gmail.com>

Don't you want to put in your nxp address?

> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

[U-Boot] [PATCH 2/2] imx: mx7d: move MX7D to Kconfig entry

[Fabio Estevam]

On Thu, Mar 3, 2016 at 4:56 AM, Peng Fan <van.freenix@gmail.com> wrote:
> If including MX7D in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS
>  will not effect.So move MX7D to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to
> "select MX7D" to boards using i.MX7 Dual.
>
> Signed-off-by: Peng Fan <van.freenix@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>