From: Alexander Graf <agraf@suse.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 27/30] arm64: Replace fdt_name env variables with fdtfile
Date: Fri, 4 Mar 2016 01:10:11 +0100 [thread overview]
Message-ID: <1457050214-117592-28-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1457050214-117592-1-git-send-email-agraf@suse.de>
The commonly defined environment variable to determine the device tree
file name is called fdtfile rather than fdt_name. Replace all occurences
of fdt_name with fdtfile.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
include/config_distro_bootcmd.h | 4 ++--
include/configs/hikey.h | 2 +-
include/configs/vexpress_aemv8a.h | 10 +++++-----
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index c19f1b0..e7d7002 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -107,7 +107,7 @@
\
"load_efi_dtb=" \
"load ${devtype} ${devnum}:${distro_bootpart} " \
- "${fdt_addr_r} ${prefix}${fdt_name}; " \
+ "${fdt_addr_r} ${prefix}${fdtfile}; " \
"fdt addr ${fdt_addr_r}\0" \
\
"efi_dtb_prefixes=/ /dtb/ /dtb/current/\0" \
@@ -115,7 +115,7 @@
"for prefix in ${efi_dtb_prefixes}; do " \
"if test -e ${devtype} " \
"${devnum}:${distro_bootpart} " \
- "${prefix}${fdt_name}; then " \
+ "${prefix}${fdtfile}; then " \
"run load_efi_dtb; " \
"fi;" \
"done;" \
diff --git a/include/configs/hikey.h b/include/configs/hikey.h
index 2d9ace9..f3ae0dd 100644
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@@ -121,7 +121,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_name=Image\0" \
"kernel_addr_r=0x00080000\0" \
- "fdt_name=hi6220-hikey.dtb\0" \
+ "fdtfile=hi6220-hikey.dtb\0" \
"fdt_addr_r=0x02000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 2949170..3e588c0 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -191,7 +191,7 @@
"kernel_addr=0x80080000\0" \
"initrd_name=ramdisk.img\0" \
"initrd_addr=0x84000000\0" \
- "fdt_name=board.dtb\0" \
+ "fdtfile=board.dtb\0" \
"fdt_alt_name=juno\0" \
"fdt_addr=0x83000000\0" \
"fdt_high=0xffffffffffffffff\0" \
@@ -213,10 +213,10 @@
"${kernel_name}; "\
" afs load ${kernel_alt_name} ${kernel_addr};"\
"fi ; "\
- "afs load ${fdt_name} ${fdt_addr} ; " \
+ "afs load ${fdtfile} ${fdt_addr} ; " \
"if test $? -eq 1; then "\
" echo Loading ${fdt_alt_name} instead of "\
- "${fdt_name}; "\
+ "${fdtfile}; "\
" afs load ${fdt_alt_name} ${fdt_addr}; "\
"fi ; "\
"fdt addr ${fdt_addr}; fdt resize; " \
@@ -235,7 +235,7 @@
"kernel_addr=0x80080000\0" \
"initrd_name=ramdisk.img\0" \
"initrd_addr=0x88000000\0" \
- "fdt_name=devtree.dtb\0" \
+ "fdtfile=devtree.dtb\0" \
"fdt_addr=0x83000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0"
@@ -245,7 +245,7 @@
"loglevel=9"
#define CONFIG_BOOTCOMMAND "smhload ${kernel_name} ${kernel_addr}; " \
- "smhload ${fdt_name} ${fdt_addr}; " \
+ "smhload ${fdtfile} ${fdt_addr}; " \
"smhload ${initrd_name} ${initrd_addr} "\
"initrd_end; " \
"fdt addr ${fdt_addr}; fdt resize; " \
--
1.8.5.6
next prev parent reply other threads:[~2016-03-04 0:10 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-04 0:09 [U-Boot] [PATCH v5 00/30] EFI payload / application support Alexander Graf
2016-03-04 0:09 ` [U-Boot] [PATCH v5 01/30] thunderx: Calculate TCR dynamically Alexander Graf
2016-03-17 1:59 ` [U-Boot] [U-Boot,v5,01/30] " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 02/30] arm64: Disable TTBR1 maps in EL1 Alexander Graf
2016-03-17 1:59 ` [U-Boot] [U-Boot,v5,02/30] " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 03/30] arm64: Make full va map code more dynamic Alexander Graf
2016-03-17 1:59 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 04/30] thunderx: Move mmu table into board file Alexander Graf
2016-03-17 2:00 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 05/30] zymqmp: Replace home grown mmu code with generic table approach Alexander Graf
2016-03-17 2:00 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 06/30] tegra: " Alexander Graf
2016-03-17 2:00 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 07/30] vexpress64: Add MMU tables Alexander Graf
2016-03-17 2:00 ` [U-Boot] [U-Boot,v5,07/30] " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 08/30] dwmmc: Increase retry timeout Alexander Graf
2016-03-17 2:00 ` [U-Boot] [U-Boot,v5,08/30] " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 09/30] hikey: Add MMU tables Alexander Graf
2016-03-17 2:00 ` [U-Boot] [U-Boot,v5,09/30] " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 10/30] arm64: Remove non-full-va map code Alexander Graf
2016-03-17 2:00 ` [U-Boot] [U-Boot,v5,10/30] " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 11/30] arm64: Only allow dcache disabled in SPL builds Alexander Graf
2016-03-17 2:01 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 12/30] disk/part.c: Expose list of available block drivers Alexander Graf
2016-03-17 2:01 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 13/30] include/efi_api.h: Add more detailed API definitions Alexander Graf
2016-03-17 2:01 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 14/30] efi_loader: Add PE image loader Alexander Graf
2016-03-17 2:01 ` [U-Boot] [U-Boot,v5,14/30] " Tom Rini
2016-03-04 0:09 ` [U-Boot] [PATCH v5 15/30] efi_loader: Add boot time services Alexander Graf
2016-03-17 2:01 ` [U-Boot] [U-Boot,v5,15/30] " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 16/30] efi_loader: Add console interface Alexander Graf
2016-03-17 2:01 ` [U-Boot] [U-Boot,v5,16/30] " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 17/30] efi_loader: Add runtime services Alexander Graf
2016-03-17 2:01 ` [U-Boot] [U-Boot,v5,17/30] " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 18/30] efi_loader: Add disk interfaces Alexander Graf
2016-03-17 2:01 ` [U-Boot] [U-Boot,v5,18/30] " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 19/30] efi_loader: Add "bootefi" command Alexander Graf
2016-03-09 23:27 ` [U-Boot] [PATCH v6 " Alexander Graf
2016-03-17 2:01 ` [U-Boot] [U-Boot,v6,19/30] " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 20/30] efi_loader: Implement memory allocation and map Alexander Graf
2016-03-17 2:02 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 21/30] arm64: Allow exceptions to return Alexander Graf
2016-03-17 2:02 ` [U-Boot] [U-Boot,v5,21/30] " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 22/30] arm64: Allow EFI payload code to take exceptions Alexander Graf
2016-03-17 2:02 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 23/30] efi_loader: hook up in build environment Alexander Graf
2016-03-17 2:02 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 24/30] efi_loader: Add distro boot script for removable media Alexander Graf
2016-03-09 23:05 ` Alexander Graf
2016-03-09 23:16 ` Tom Rini
2016-03-09 23:26 ` [U-Boot] [PATCH v6 " Alexander Graf
2016-03-17 2:02 ` [U-Boot] [U-Boot, v6, " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 25/30] efi_loader: Add README section in README.efi Alexander Graf
2016-03-17 2:02 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 26/30] efi_loader: Add MAINTAINERS entry Alexander Graf
2016-03-17 2:02 ` [U-Boot] [U-Boot,v5,26/30] " Tom Rini
2016-03-04 0:10 ` Alexander Graf [this message]
2016-03-17 2:02 ` [U-Boot] [U-Boot, v5, 27/30] arm64: Replace fdt_name env variables with fdtfile Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 28/30] arm: Allow EFI payload code to take exceptions Alexander Graf
2016-03-17 2:03 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 29/30] efi_loader: Call fdt preparation functions Alexander Graf
2016-03-17 2:03 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 0:10 ` [U-Boot] [PATCH v5 30/30] efi_loader: Pass proper device path in on boot Alexander Graf
2016-03-17 2:03 ` [U-Boot] [U-Boot, v5, " Tom Rini
2016-03-04 9:19 ` [U-Boot] [PATCH] efi_loader: Reserve 2 additional pages for fdt Alexander Graf
2016-03-04 9:41 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457050214-117592-28-git-send-email-agraf@suse.de \
--to=agraf@suse.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox