From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dirk Heinrichs Date: Sat, 12 Jan 2013 09:00:34 +0100 Subject: [U-Boot] Running vanilla u-boot v2012.10 on Guruplug Message-ID: <1457183.WG9k8kxG45@moria> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, I have compiled u-boot v2012.10 for my Guruplug and would like to test it from RAM before I write it to flash. So following instructions I found via internet search I load the u-boot.kwb from SATA disk into RAM at address 0x800000 (ext2load ide 0:1 0x800000 u-boot.kwb) and then start it with "go 0x800200". Unfortunately, this only restarts the running u-boot (v2012.04.01 from Debian) instead of starting the new one. So my questions are: 1) Does running from RAM this way work at all? 2) If I can't test it from RAM, is it save to write it to flash anyway? Thanks... Dirk -- Dirk Heinrichs Tel: +49 (0)2471 209385 | Mobil: +49 (0)176 34473913 GPG Public Key C2E467BB | Jabber: dirk.heinrichs at altum.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 190 bytes Desc: This is a digitally signed message part. URL: