U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jagan Teki <jteki@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] spi: omap3: Fix multiple definition of 'priv'
Date: Tue, 15 Mar 2016 23:56:33 +0530	[thread overview]
Message-ID: <1458066393-3606-1-git-send-email-jteki@openedev.com> (raw)

Global definition of priv seems no-sense to use it
for non-dm case and pass the pointer to functions
which are common to both dm and non-dm.

So, fix this by removing omap3_spi_slave from non-dm
and make visible to omap3_spi_priv for both dm and non-dm.

Cc: Christophe Ricard <christophe-h.ricard@st.com>
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
 drivers/spi/omap3_spi.c | 40 +++++++++++++++++++++-------------------
 1 file changed, 21 insertions(+), 19 deletions(-)

diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index 98ee6d3..2fe34c9 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -103,6 +103,9 @@ struct mcspi {
 };
 
 struct omap3_spi_priv {
+#ifndef CONFIG_DM_SPI
+	struct spi_slave slave;
+#endif
 	struct mcspi *regs;
 	unsigned int cs;
 	unsigned int freq;
@@ -454,16 +457,9 @@ static void _omap3_spi_claim_bus(struct omap3_spi_priv *priv)
 
 #ifndef CONFIG_DM_SPI
 
-struct omap3_spi_slave {
-	struct spi_slave	 slave;
-	struct omap3_spi_priv   spi_priv;
-};
-
-struct omap3_spi_priv *priv;
-
-static inline struct omap3_spi_slave *to_omap3_spi(struct spi_slave *slave)
+static inline struct omap3_spi_priv *to_omap3_spi(struct spi_slave *slave)
 {
-	return container_of(slave, struct omap3_spi_slave, slave);
+	return container_of(slave, struct omap3_spi_priv, slave);
 }
 
 void spi_init(void)
@@ -473,13 +469,15 @@ void spi_init(void)
 
 void spi_free_slave(struct spi_slave *slave)
 {
-	struct omap3_spi_slave *ds = to_omap3_spi(slave);
+	struct omap3_spi_priv *priv = to_omap3_spi(slave);
 
-	free(ds);
+	free(priv);
 }
 
 int spi_claim_bus(struct spi_slave *slave)
 {
+	struct omap3_spi_priv *priv = to_omap3_spi(slave);
+
 	_omap3_spi_claim_bus(priv);
 	_omap3_spi_set_wordlen(priv);
 	_omap3_spi_set_mode(priv);
@@ -490,6 +488,8 @@ int spi_claim_bus(struct spi_slave *slave)
 
 void spi_release_bus(struct spi_slave *slave)
 {
+	struct omap3_spi_priv *priv = to_omap3_spi(slave);
+
 	/* Reset the SPI hardware */
 	spi_reset(priv->regs);
 }
@@ -497,7 +497,7 @@ void spi_release_bus(struct spi_slave *slave)
 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 				     unsigned int max_hz, unsigned int mode)
 {
-	struct omap3_spi_slave *ds;
+	struct omap3_spi_priv *priv;
 	struct mcspi *regs;
 
 	/*
@@ -551,29 +551,31 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 		return NULL;
 	}
 
-	ds = spi_alloc_slave(struct omap3_spi_slave, bus, cs);
-	if (!ds) {
+	priv = spi_alloc_slave(struct omap3_spi_priv, bus, cs);
+	if (!priv) {
 		printf("SPI error: malloc of SPI structure failed\n");
 		return NULL;
 	}
 
-	priv = &ds->spi_priv;
-
 	priv->regs = regs;
 	priv->cs = cs;
 	priv->freq = max_hz;
 	priv->mode = mode;
-	priv->wordlen = ds->slave.wordlen;
+	priv->wordlen = priv->slave.wordlen;
 #ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED
 	priv->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
 #endif
 
-	return &ds->slave;
+	return &priv->slave;
 }
 
 int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 	     const void *dout, void *din, unsigned long flags)
-{ return _spi_xfer(priv, bitlen, dout, din, flags); }
+{
+	struct omap3_spi_priv *priv = to_omap3_spi(slave);
+
+	return _spi_xfer(priv, bitlen, dout, din, flags);
+}
 
 #else
 
-- 
1.9.1

             reply	other threads:[~2016-03-15 18:26 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-15 18:26 Jagan Teki [this message]
2016-03-15 18:33 ` [U-Boot] [PATCH] spi: omap3: Fix multiple definition of 'priv' Jagan Teki
2016-03-15 18:50 ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1458066393-3606-1-git-send-email-jteki@openedev.com \
    --to=jteki@openedev.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox