From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ian Campbell Date: Tue, 05 Apr 2016 11:44:44 +0100 Subject: [U-Boot] [PATCH 3/3] sunxi: Enable usb ports on the Sinovoip BPI M3 In-Reply-To: <57038AB8.70902@redhat.com> References: <1459624248-13306-1-git-send-email-hdegoede@redhat.com> <1459624248-13306-3-git-send-email-hdegoede@redhat.com> <1459849464.1749.5.camel@hellion.org.uk> <57038AB8.70902@redhat.com> Message-ID: <1459853084.1749.10.camel@hellion.org.uk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, 2016-04-05 at 11:51 +0200, Hans de Goede wrote: > Hi, > > On 05-04-16 11:44, Ian Campbell wrote: > > > > On Sat, 2016-04-02 at 21:10 +0200, Hans de Goede wrote: > > > > > > DLDO3 is used to provide Port-D power and PD is used for the > > > usb-hub / sata-5v enable pins. The 2.5V comes from the schematic > > > and matches the factory image fex file. > > Is the dts update being sync'd from the kernel? > Erm, no actually, the A83t USB support for the kernel is not entirely > ready, so we've some very minimal nodes in u-boot's a83t.dtsi for > now, > which will get replaced with the real deal when we sync in the > future. > > The only thing u-boot cares about are controller base address and > the compatible string, and there is no discussion about those, > which is why I merged ChenYu's .dtsi patches with the minimal nodes, > this commit just enables these nodes in the M3 dts. Ah, ok. Is it worth mentioning that in the commit log for clarity (think of someone doing a resync with the kernel and getting confused by the non-kernel bits)? Maybe the commit message on the orignal addition makes it unnecessary? If you think that's the case then you can keep my Ack. Ian.