From: Ian Campbell <ijc@hellion.org.uk>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] sunxi: H3: Do not clear usb companion clk-gate / reset on remove
Date: Sun, 10 Apr 2016 09:18:14 +0100 [thread overview]
Message-ID: <1460276294.27438.3.camel@hellion.org.uk> (raw)
In-Reply-To: <1460208201-16572-1-git-send-email-hdegoede@redhat.com>
On Sat, 2016-04-09 at 15:23 +0200, Hans de Goede wrote:
> On the H3 we need to enable the clk and de-assert the reset of the
> companion to be able to talk to the actual usb host controller.
>
> Before this commit we were also disabling the companion clk-gate /
> asserting its reset on remove, causing the later remove callback of
> the companion itself to (sometimes) fail with:
>
> ERROR: USB HC reset timed out!
>
> This commit fixes this by not disabling the companion's clk-gate nor
> asserting its reset on remove.
This sounds like a bug (or perhaps lack of expressiveness) in the DM
clk bindings to me, but I can see why we want to do it this way shirt
term:
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
> ---
> ?drivers/usb/host/ehci-sunxi.c | 10 +++++++---
> ?drivers/usb/host/ohci-sunxi.c | 10 +++++++---
> ?2 files changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-
> sunxi.c
> index d5eb492..f2d83e3 100644
> --- a/drivers/usb/host/ehci-sunxi.c
> +++ b/drivers/usb/host/ehci-sunxi.c
> @@ -38,6 +38,7 @@ static int ehci_usb_probe(struct udevice *dev)
> ? struct ehci_sunxi_priv *priv = dev_get_priv(dev);
> ? struct ehci_hccr *hccr = (struct ehci_hccr
> *)dev_get_addr(dev);
> ? struct ehci_hcor *hcor;
> + int extra_ahb_gate_mask = 0;
> ?
> ? /*
> ? ?* This should go away once we've moved to the driver model
> for
> @@ -45,15 +46,18 @@ static int ehci_usb_probe(struct udevice *dev)
> ? ?*/
> ? priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
> ?#ifdef CONFIG_MACH_SUN8I_H3
> - priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_OHCI0;
> + extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
> ?#endif
> ? priv->phy_index = ((u32)hccr - SUNXI_USB1_BASE) / BASE_DIST;
> ? priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
> + extra_ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
> ? priv->phy_index++; /* Non otg phys start at 1 */
> ?
> - setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
> + setbits_le32(&ccm->ahb_gate0,
> + ?????priv->ahb_gate_mask | extra_ahb_gate_mask);
> ?#ifdef CONFIG_SUNXI_GEN_SUN6I
> - setbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
> + setbits_le32(&ccm->ahb_reset0_cfg,
> + ?????priv->ahb_gate_mask | extra_ahb_gate_mask);
> ?#endif
> ?
> ? sunxi_usb_phy_init(priv->phy_index);
> diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-
> sunxi.c
> index 6f3f4ce..2a1e8bf 100644
> --- a/drivers/usb/host/ohci-sunxi.c
> +++ b/drivers/usb/host/ohci-sunxi.c
> @@ -38,6 +38,7 @@ static int ohci_usb_probe(struct udevice *dev)
> ? struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev);
> ? struct ohci_sunxi_priv *priv = dev_get_priv(dev);
> ? struct ohci_regs *regs = (struct ohci_regs
> *)dev_get_addr(dev);
> + int extra_ahb_gate_mask = 0;
> ?
> ? bus_priv->companion = true;
> ?
> @@ -47,18 +48,21 @@ static int ohci_usb_probe(struct udevice *dev)
> ? ?*/
> ? priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
> ?#ifdef CONFIG_MACH_SUN8I_H3
> - priv->ahb_gate_mask |= 1 << AHB_GATE_OFFSET_USB_EHCI0;
> + extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
> ?#endif
> ? priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
> ? priv->phy_index = ((u32)regs - (SUNXI_USB1_BASE + 0x400)) /
> BASE_DIST;
> ? priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
> + extra_ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
> ? priv->usb_gate_mask <<= priv->phy_index;
> ? priv->phy_index++; /* Non otg phys start at 1 */
> ?
> - setbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
> + setbits_le32(&ccm->ahb_gate0,
> + ?????priv->ahb_gate_mask | extra_ahb_gate_mask);
> ? setbits_le32(&ccm->usb_clk_cfg, priv->usb_gate_mask);
> ?#ifdef CONFIG_SUNXI_GEN_SUN6I
> - setbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
> + setbits_le32(&ccm->ahb_reset0_cfg,
> + ?????priv->ahb_gate_mask | extra_ahb_gate_mask);
> ?#endif
> ?
> ? sunxi_usb_phy_init(priv->phy_index);
next prev parent reply other threads:[~2016-04-10 8:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-09 13:23 [U-Boot] [PATCH] sunxi: H3: Do not clear usb companion clk-gate / reset on remove Hans de Goede
2016-04-10 8:18 ` Ian Campbell [this message]
2016-04-10 8:45 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1460276294.27438.3.camel@hellion.org.uk \
--to=ijc@hellion.org.uk \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox