From: Bin Meng <bmeng.cn@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 26/28] x86: Remove acpi=off boot parameter when ACPI is on
Date: Sat, 7 May 2016 07:46:35 -0700 [thread overview]
Message-ID: <1462632397-11224-27-git-send-email-bmeng.cn@gmail.com> (raw)
In-Reply-To: <1462632397-11224-1-git-send-email-bmeng.cn@gmail.com>
Remove the kernel boot parameter acpi=off so that kernel can turn on
ACPI support.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
---
Changes in v2: None
include/configs/x86-common.h | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index ea815c2..1e0f451 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -207,14 +207,19 @@
#define CONFIG_HOSTNAME x86
#define CONFIG_BOOTFILE "bzImage"
#define CONFIG_LOADADDR 0x1000000
-#define CONFIG_RAMDISK_ADDR 0x4000000
+#define CONFIG_RAMDISK_ADDR 0x4000000
+#ifdef CONFIG_GENERATE_ACPI_TABLE
+#define CONFIG_OTHBOOTARGS "othbootargs=\0"
+#else
+#define CONFIG_OTHBOOTARGS "othbootargs=acpi=off\0"
+#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_STD_DEVICES_SETTINGS \
"pciconfighost=1\0" \
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
- "othbootargs=acpi=off\0" \
+ CONFIG_OTHBOOTARGS \
"ramdiskaddr=0x4000000\0" \
"ramdiskfile=initramfs.gz\0"
--
1.8.2.1
next prev parent reply other threads:[~2016-05-07 14:46 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-07 14:46 [U-Boot] [PATCH v2 00/28] x86: Initial ACPI support for Intel BayTrail Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 01/28] x86: Drop asm/acpi.h Bin Meng
2016-05-07 18:45 ` Simon Glass
2016-05-08 8:17 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 02/28] x86: Fix build warning in tables.c when CONFIG_SEABIOS Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:17 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 03/28] x86: acpi: Fix compiler warnings in write_acpi_tables() Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:17 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 04/28] x86: irq: Reserve IRQ9 for ACPI in PIC mode Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:17 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 05/28] x86: irq: Enable SCI on IRQ9 Bin Meng
2016-05-08 8:17 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 06/28] x86: dts: Update to include ACTL register details Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:17 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 07/28] acpi: Change build log for ASL files Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:17 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 08/28] acpi: Explicitly spell out dsdt.c in the make rule Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 09/28] acpi: Specify U-Boot include path for ASL files Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 10/28] acpi: Output all errors/warnings/remarks when compiling ASL Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 11/28] x86: acpi: Remove unused codes Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 12/28] x86: acpi: Various changes to acpi_table.h Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 13/28] x86: acpi: Reorder code in acpi_table.h Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 14/28] x86: acpi: Remove acpi_create_ssdt_generator() Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 15/28] x86: acpi: Change fill_header() Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 16/28] x86: acpi: Adjust order in acpi_table.c Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 17/28] x86: acpi: Use u32 in table write routines Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 4:26 ` Bin Meng
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 18/28] x86: acpi: Align FACS table to a 64 byte boundary Bin Meng
2016-05-07 18:46 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 19/28] x86: acpi: Clean up table header revisions Bin Meng
2016-05-07 18:47 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 20/28] x86: acpi: Add some generic ASL libraries Bin Meng
2016-05-07 18:47 ` Simon Glass
2016-05-08 8:18 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 21/28] x86: acpi: Return table length in acpi_create_madt_lapics() Bin Meng
2016-05-07 18:47 ` Simon Glass
2016-05-08 8:19 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 22/28] x86: baytrail: Add platform ASL files Bin Meng
2016-05-07 18:47 ` Simon Glass
2016-05-08 8:19 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 23/28] x86: baytrail: Generate ACPI FADT/MADT tables Bin Meng
2016-05-07 18:47 ` Simon Glass
2016-05-08 8:19 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 24/28] x86: baytrail: Enable ACPI table generation for all boards Bin Meng
2016-05-07 18:47 ` Simon Glass
2016-05-08 8:19 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 25/28] x86: baytrail: Add .gitignore for ACPI enabled boards Bin Meng
2016-05-07 18:47 ` Simon Glass
2016-05-08 8:19 ` Bin Meng
2016-05-07 14:46 ` Bin Meng [this message]
2016-05-07 18:47 ` [U-Boot] [PATCH v2 26/28] x86: Remove acpi=off boot parameter when ACPI is on Simon Glass
2016-05-08 8:19 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 27/28] x86: doc: Minor update for accuracy Bin Meng
2016-05-07 18:47 ` Simon Glass
2016-05-08 8:19 ` Bin Meng
2016-05-07 14:46 ` [U-Boot] [PATCH v2 28/28] x86: doc: Document ACPI support Bin Meng
2016-05-07 18:47 ` Simon Glass
2016-05-08 8:19 ` Bin Meng
2016-05-07 18:45 ` [U-Boot] [PATCH v2 00/28] x86: Initial ACPI support for Intel BayTrail Simon Glass
2016-05-08 1:27 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462632397-11224-27-git-send-email-bmeng.cn@gmail.com \
--to=bmeng.cn@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox